Water Pumps Good Quality On Sale Made In China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1)High performance
2)Mechanical seal
3)Cast iron impeller or bronze impeller
4)Lower vibration water pump
5)Large flow
2.Packaging & Delivery
Packaging Detail: | export wooden cases |
Delivery Detail: | within 30 days once receipt of 30% T/T prepayment |
BPO Irrigation Centrifugal Split Water Pump
3.FEATURES
BPO series single-stage double-suction open type centrifugal pump self-researched by the Company after absorbed advanced technology of similar products and combined application requirement of various customers. The series pump adopts excellent hydraulic model, wider type spectrum and better structure. Pump casing is produced by special machine tool, which ensures concentricity among shaft bearing, shaft and pump case, and provides better reliability and maintainability. Apply to municipal water supply and drainage, water circulation of air conditioner, agricultural hydraulic engineering, such as irrigation, drain flooded fields etc., industrial water supply system, firefighting system, water supply and drainage of
heating system, transportation of clean water
4. OPERATING CONDITION
a)Rotate speed: 2950r/min, 1480 r/min, 980 r/min, 730 r/min
b)Flow range: 64.4~9810m3/h
c)Delivery lift: =200m
d)Medium temperature: =80 ,
e)product adopting special materials: -20 ~120
f)Ambient temperature: Lower than 40
g)Operating pressure up to achieves 2.5MPa
5. MATERIAL
a)Pump casing: Cast iron or magnesium iron
b)Pump cover: Cast iron or magnesium iron
c)Impeller: Cast iron, magnesium iron or tin bronze
d)Sealing ring: Cast iron or tin bronze
e)Pump shaft: 45# steel plated with chrome
f)Dynamic and static mechanical sea: Hard carbide, graphite
g)Configuring other material according to requirement is allowable
Rated flow | 10(m3/h) |
Rated head | 26m |
Rated power | 1.5Kw |
Voltage | 220V |
Rated Current | 7.2A |
Rated speed | 2860r/min |
Discharge diameter | 50mm |
6.Conditions of use
Pumps used in the following conditions should be continuously to work properly:
1. For water pumps suitable medium, medium temperature shall not exceed + 40°C
2. The medium PH value between 6.5 ~ 8.5
3. The volume of medium containing solid impurity is less than 0.1%, the size is not more than 0.2 mm
4. The power frequency 50 hz, voltage for single-phase 220 v, 380 v, three-phase voltage fluctuation range for rating of 0.9 to 1.1 times
5. Diving depth of no more than 5 m, is not suitable for irrigation and drainage of sewage and chemicals.
- Q: I cant get water to flow though the motor It seems like the pump isnt working any advise!
- Since you've done all the normal fixes already i think you should look at the possibility that your cam shaft is worn or the lifters. I'm not sure if an evinrude 20hp engine has lifters but i've had this same problem a few years back when chevy put cheap cams in some of their vehicles. The lobes on the cam were rounding off instead of being a teardrop shape and the vehicles would start and idle fine but would pop like mad on acceleration. Hope this helps!
- Q: If I were to go to a shop, how much would it cost to replace my water pump? It's a 4.0 6 cyl engine.
- $70-$150 +cost of pump. Most shops have certain maintenance hours for certain jobs. Call around for exact pricing. Honestly, if you have a sockets (metric) and wrenches you can do it yourself in about an hour or two, maybe less. You don't have to mechanically inclind to replace the water pump on the 97 Wrangler. If you do it, I do recommend buying a Haynes/Chilton's book if you don't really have a clue. If you need to buy the tools, book, pump (gasket should come with it), water pump RTV, and coolant. That will still be a lot cheaper than paying somebody. Plus, you will get the joy of doing it yourself. Also, you could put the savings into a high-flow pump, vice original equipment.
- Q: From the days of the laying of pipe line and trouble is far away, two or more people share the idea of a water pump, controlled by the electromagnetic valve, do not know whether it is feasible, attention should be paid to each of the power may be different phase, and it is the automatic control, automatic switching request all big brother big sister what the solution of power. At the same time, the electromagnetic valve is closed to others. Turn on your own solenoid valve StopThe idea is that each pumping with its own power, so you don't have to worry about sharing electricity.
- The electromagnetic valve is estimated to be expensive to death ~!You set up a high water tank in the middle of the user. The pump is pumped to the water tankIn each according to the water meter, then according to water allocation total cost ~ ~ ~!
- Q: I recently bought a 1992 Honda Accord. It has high mileage but the records kept on it were impecable up to about the last 3 years. I have read that you need to replace the timing belt/water pump every 80k miles. However; I do not know when it was changed last. The Only record in the book on the subject was back at 90k miles. That was the first time they had the timing belt changed.So How do I know its time to change it again? The car now has 199k miles. I do not want to do unnecessary work before time, however; I also know that the affects it will have on the engine is great if its not done within the right TIME! Is there anyway to know it needs to be done? What kind of signs will the car give? And how much is it going to cost me when it has to be done? Thanks!
- A water pump is mostly pretty obvious when it is going/gone it chirps it squeaks and your temperature will usually be higher than it usually was [not always]. As for a timing belt... they are relatively inexpensive, the labor isnt that bad since the car is VERY easy to work on, and it is difficult to tell when one is needed since the most it will make is a whining noise when its getting weaker, only sometimes though. This is hard to hear too. Best advice I have is to just get a couple appraisals/estimates, or have a friend who is mechanically savvy take a look to see if he/she can tell if the belt is worn to the point where it needs replacing. I had a timing belt done for $120 parts and labor on a 91 accord (same car)
- Q: What is the difference between self-priming and non self suction?
- Self suction pump, pumping water conservancy machinery used, composed of a pump body, a rotating assembly, leading assembly, trash cover, and inlet and outlet pipe, a blocking net general assembly; start the motor, dynamic linkage, rotary assembly in promoting the impeller centrifuge, bubble up surging, generates suction. The air inlet pipe, the outlet pipe from the pump body, air exhaust, water outlet pipe outflow, the water pump, excellent performance, deep suction lift, large flow operation, saving time and labor, is the most excellent mechanical pumps in the realistic society.1. self suction pump, as the name implies, pumping tube is under the condition of air, use form a negative pressure pump at work (vacuum), under the influence of the atmospheric pressure will be lower than the water pumping port, then discharged from the pump discharge end. Before this process, there is no need to add "diversion water". The pump with this capability is called a self suction pump".2., some centrifugal or rotary vane pump, before absorbing water, you must add "water diversion" in the pump cavity to form a closed environment, and then pump operation to form negative pressure, to achieve the purpose of water absorption. For example, a manual pump used in rural areas. No self-priming capacity of the pump, each time before adding water to add "water diversion", it is very troublesome.
- Q: I have a 1 HP water pump that will pump water through a 1 and 1/2hose. What is the approx. GPM (just to have a reference) of a pump like this?
- www.okorder /... You have a lot of choices depending on depth to water, output pressure, etc.
- Q: I was vacuuming up water from my basement I assumed was from the rain, suddenly water started spraying out of a blue pump at the base of my furnace, don't know what the pump does or why its spraying but its making an awful mess.
- Furnace Water Pump
- Q: where would I be able to find information on how to change out a water pump for that specific type of vehicle and year, as well I had got a stain on the body from road work it seems to be cement how could I take spots out without damaging the body's paint? What are my options thanks...
- why would you like to replace the water pump? seems to me the factory warranty of 3 years 36,000 miles might apply unless you're over on mileage. if you can email me, i will get you the procedure.
- Q: What is the reason for the overload of the water pump indicator?
- Hello friend, pump overload shows that the water pump current increases, the power supply phase and water pump load becomes larger.
- Q: how can i choose a water pump that is truely on demand as in shuts off when not needed automaticly i purchaced one that claimed it was a quot;demandpump is mine defective or not a true on demand pump?
- RV section is probably under cars and transportation, others. On demand pumps are quite common and used in many RV's.
Send your message to us
Water Pumps Good Quality On Sale Made In China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
