Vertical Multistage Centrifugal Pump With High Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Vertical Multistage Centrifugal Pump With High Quality
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.My company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.My company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product parameters of Vertical Multistage Centrifugal Pump With High Quality
Capacity | up to 250 m3/h |
Head | up to305m |
Speed | up to 3600rpm |
Power | up to 200kw |
Voltage | 220V to 480V |
Temperature range | Within 120 Deg C |
Working pressure | Within 40bar |
Application of Vertical Multistage Centrifugal Pump With High Quality
It can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure.
CDL type is applicable to conveying non-corrosive liquid, While CDLF is suitable for slightly corrosive liquid.
Water supply: Water filter and transport in Waterworks, boosting of main pipeline, boosting in high-rise buildings.
Industrial boosting: Process flow water system, cleaning system, high-pressure washing system, fire fighting system.
Industrial liquid conveying: Cooling and air-conditioning system, boiler water supply and condensing system, machine-associated purpose, acids and alkali .
Water treatment: Ultrafiltration system, reverse osmosis system, distillation system, swimming pool, separator.
Irrigation: Farmland irrigation, spray irrigation, dripping irrigation
Operation Condition of Vertical Multistage Centrifugal Pump With High Quality
Thin, clean, non-flammable and non-explosive liquid containing no solid granules and fibers.
Liquid temperature:
Normal temperature type: -15~+70,
Hot water type: +70~+120
Ambient temperature: Up to +40
Altitude: Up to 1000m
Electric Motor of Vertical Multistage Centrifugal Pump With High Quality
Full-enclosed air-blast two-pole standed motor
Protection class: IP55
Insulation class: F
Standard voltage
50Hz:
1x220230/240V
3x200220/346380V
3x220240/380415V
3x380415V
60Hz:
3X200230/346400V
3x220255/380440V
3x220227/380480V
Picture Show of Vertical Multistage Centrifugal Pump With High Quality
Why Choose Us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
Transportation
- Q: i need the location of the water pump or for the thermostat thank you
- The water pump is timing belt driven and is under the plastic timing cover on passenger side. These water pumps have a history of breaking, due to the fact they have a plastic impeller and it shears off the shaft, which causes the engine to overheat. First you want to remove the thermostat and then check the water pump. Follow the lower radiator hose to where it connects to the engine. That flange is where the thermostat is at. After you remove the thermostat you can shine a light in the hole and put your finger in there, if the impellar of the water pump moves, it needs to be replaced. If it does, then you might as well replace the timing belt and tensioner, seeing how you have to remove it to get the water pump off.
- Q: Our water pump had a leak in one of the pipes which kept making us Los the prime. I've replace the piping so it no longer leaking but I can't get I to work. The pump runs but the water doesn't move-. The pressure says it is at 50 but nothing. Also its a sahllow well pump jut bought last sprig.Any ideas? Sorry for the bad grammar new to this tablet.
- You would be wise to call a pump expert and have them examine it.
- Q: i used my water fountain pump for the first time yesterday and I've had it for 10 years and i used it yesterday it worked with the water and everything was fine!then the next day i wanted to turn it on , it went on it started vibrating but it wasn't pumpingwhen i had it on the other day the water was dirty but it was workingi cleaned it the filtershould i put vinegar to clean it ?and what else should i do!??? Help :#92;thank you!
- Totally agree with Peetr Peetr's answer above. When you purchase the trashcan the Rubbermaid cans have been proven to be safe for potable water, can't say that all others will be made with non leaching plastics. Also Suggest adding the dechlorinating product i.e. prime into the tank itself, instead of adding it to the water and sitting all week in the vessel which leaves a layer of scum on the trashcan from my experience. Hth
- Q: I Have a 1982 Suzuki DT8 Outboard motor, i rebuilt the water pup, new impeller, wear plate, all that. This is the first time iv run it in a barrel, it wont pump water now. But here is the thing, when i take the inspection cover off(the little round cover that lets you acces the shift linkage), and i run the motor, it will pump water. i noticed that wile i have that cover off all the exhaust comes out that hole and not out the bottom, is the exhaust getting sucked in the pump and stopping it from circulating water?
- Sorry, I thought I was answering this question before......is there 2 questions. Ok, the water is exhausted out the fin just above and behind the prop. The exhaust and water are both in the leg area where the shift rod is, so when you take the access plate off, you'll get some water and exhaust. You can't see the water coming out the exhaust port with the motor in a barrel. It's below the water line. And no the exhaust isn't being sucked back in the water pump, at least not enough to matter. There is a flush attachment that will feed water from a hose into the water pump. With the engine on a rack, or the boat out of the water, you can see where the exhaust and water come out. Running in a barrel isn't the best way to see anything. If you take the prop off it's easy to over rev. the motor. My advise is to put the motor on the boat in the water and start it. Check the engine block every couple min. for overheating. A little water dribbled on the head will sizzle, if it's getting to hot...if so shut it down, and recheck the water pump job. There is a tube that sticks in to the water pump housing. make sure it's in position.
- Q: how do you change the water pump
- Replacing the water pump requires removing the timing belt because it is timing belt driven, so the timing belt should be changed at the same time. Standard practice is to replace the water pump when the belt is changed to avoid duplicate labor later.
- Q: Fire hydrant and fire pump adapter difference
- Fire hydrant is out of water, the water pump is water supply to the pipe network
- Q: quot;A tank has the shape of an inverted circular cone (point at the bottom) with height 10 feet and radius 4 feet. The tank is full of water. We pump out water (to a pipe at the top of the tank) until the water level is 5 feet from the bottom. The work W required to do this is given byquot;I know how to find it if it's a right circular cylinder, but how do I adjust for the changing area? Also would a and b = 0 and 5? Thanks ahead of time!
- calculate the amount of water U start with by computing volume of cone: V = 1/3πr?h {r = 4', h = 10'} V = 0.333π(4)?(10) = 167.55 ft? calculate the amount of water remaining in cone after pumping is done: V = 0.333π(2)?(5) = 20.944 ft? calculate the volume of water pumped: 167.55 - 20.944 = 146.6 ft? 1 ft? of water weighs 62.4 lb, calculate weight of water removed: 146.6(62.4) = 9148 lbs The Center of Mass of the water in the cone (when h = 10') is at 1/4 of 10 ft = 2.5 ft high The Center of Mass of the water in the cone (when h = 5') is at 1/4 of 5 ft = 1.25 ft height The Center of C.of M. change = 1.25 + (2.5 - 1.25)/2 = 1.25+0.625 = 1.875 ft If we consider that the Center of Mass of the water removed was at 1.875 ft, All the water removed was then lifted an average of 10 - 1.875 = 8.125 ft Work done = W = (9148)(8.125) = 74,300 ft-lbs ANS
- Q: my heater in my 94 ford ranger went out about a month ago today i flushed the heater core and it worked for a while and started going out again after i was driving for 15 to 20 mins. the hose going into the heater core was warm but coming out wasnt. could it have gotten clogged again or could it be something else.
- your right on the problem so to really figure it out take the hose off or lose enough to make a mess and see it flowing. Take it off at the water pump thats where it comes out at. the water pump pumps water into the radiator or up, not the other way around.
- Q: I had high-pitch noise coming from my engine; it was coming from the belt area. I change the belts but the noise is still happening. After doing some research, I noticed that the noise is coming from the Water pump bearings. I installed this water pump Last year and the warranty is expired on it. A friend told me that if a bearing goes bad on a Water pump, then I should flush the cooling system because it leaves metal shavings into the engine. Is this true? I already flushed my cooling system at the mechanic (he has a special machine) about 2 weeks ago. Is it necessary to do another flush because of bad Water Pump bearings?
- well they do go bad but not very offen.. and really no need to flush if your going to replace it .. nothing to worry over
- Q: Okay, the fan has the clutch unit on the front with the large nut attaching it to the water pump. Then 4 screws attach the pulley to the water pump as well. What's the best way to immobilize pulley/pump so I can get the fan blade clutch nut unscrewed? Can't hold onto the fan or clutch unit since it simply spins. Can't realy seem to hold onto the pulley either as it prefers to spin? Any suggested best ways?
- I will suggest you ASAP Restoration for water removal Charlotte. They can handle any water damage emergency, big or small. They have expertly trained technicians on-call 24 hours a day, 7 days a week, 365 days a year.
Send your message to us
Vertical Multistage Centrifugal Pump With High Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
