Vertical High Pressure Jocky Pump for Fire Fighting System
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Jocky Pump with Water Pressure Tank for Fire Fighting System
1.Structure of Jocky Pump with Water Pressure Tank Description
Jocky Pump with Water Pressure Tank is one of part for fire fighting water supply system,It is vertical multistage centrifugal pump,It driven by electric motor,high pressure.The fire pumps are mainly used in the hydrant and automatic spray extinguishing systems etc. in the fixed fire fighting system in enterprises,institutions,project construction,high building etc,to deliver clean water and medium similar to water in physiochemical property,not containing solid grain and of temperature below 100°C. They are also used in the common water supply system for fire control, life and production, and water supply and drainage in constructions and municipal projects etc.
2.Main Features of Jocky Pump with Water Pressure Tank
• Highly efficient, Energy saving
• Good performance
•Pressure stabilization
•Anti-impact
•Full-automatic control
3.Jocky Pump with Water Pressure Tank Images
4.Jocky Pump with Water Pressure Tank Specification
Ambient temperature | +5°c~+40°c |
Pump diameter | 350-1600mm |
Flow range | 1~200L/s |
Pressure range | 0.2~2.25MPa |
Motor power range | 1.5~200kW |
Inlet/outlet Diameter | DN50~DN200mm |
5.FAQ
①Do you offer other kind of firefighting pumps？
Yes,we also offer splite casing,end suction firefighting pumps,just send inquiry to us.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance. Normally, We have 1 year warranty.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. It related to the state and detailed requirement of customers.
- Q: How to install circulating water pump for cooling tower?
- I think it should be installed on the outlet pipe of the cooling tower
- Q: Is it cheaper to run an electric water pump or a furnace?
- heat water/pump. not sure what that is but I know what a heat pump is. If that whats your talking about thean the answer is well...yes and no. depending on cost of gas and electric typical a heat pump is better to run for heat as along as its above freezing outside. It will still work and put out heat all winter but it won't be much heat for what your paying for, at which point your better with gas heat.
- Q: does water pump sealers work?
- If your talking about the water pump for a car it doesn't have any pumps those would be the radiator pumps that are connected to the water pump and transmission which keeps the radiator and transmission at a temperature that keeps the vehicle from over heating. If you have a overheating car and a mechanic told you your water pump has a leak then sorry you would have to replace the water pump but just don't go to a popular mechanic for that because it can get really expensive do your research and find you someone with a garage it cheaper because the part itself is not that expensive it putting it in that cost lol. Hope this helps.
- Q: My car started to leak anti-freeze Really fast, so i had to pour water in there to keep it from overheating, so i took it to my mechanic, and left it there overnight, and they call me the next morning and tell me that the water pump needs to be fixed, and a few belts got water damage on them, and a a few driving belts need to be replaced. he said it would come out to be 695.97, does that sound like the right cost?
- Here's okorder /... If the timing belt and belt tensioner pulley was replaced also, that's the going rate for the job. You have an interference engine and a timing belt driven water pump, so I'm sure they changed the timing belt and if they did a good job, you got billed reasonably. If the belt had broken, you may have had to total the car.
- Q: I just put a thermostat in my 92 chevy but the gauge still shows close to hot but go down to normal pretty fast and occasionally i her a loud sound coming from the area where the belt is but i can't pinpoint it. I replaced the pump about three years ago, could that be it again so soon?
- Take it to the local machanic shop
- Q: I just had the water pump replaced, now less than a week later it is overheating again and sometimes blowing cold air. What does this sound like it would be?
- Unless the weep-hole is leaking on the bottom of the water-pump input shaft housing, the impeller inside the pump rarely goes bad. The impeller is the part inside the water-pump that circulates the coolant thorough the radiator, heater-core and cooling passages of the motor. There are several checks to eliminate possibilities why the cooling system is getting too hot. I wish you had told us the year, make and model of the car plus the number of miles on the odometer. If the coolant has been getting so hot that it bubbles back inside the plastic cooling system reservoir, have a private mechanic do an inexpensive cooling system pressure test to see if you have any external or internal coolant leaks. If not, have the thermostat changed with a factory original. Always check and refill the radiator when the motor is stone cold. Fill the plastic cooling system reservoir 3/4 full when ever you remove the radiator pressure cap. If you or someone has ever mixed chemical types of antifreeze other than the factory recommended brand or type it will eventually plug-up your cooling system and cause it to overheat. It may be necessary to drain, flush and clean the system with a one part acid cleaner. If you haven't in the past had your coolant drained and flushed every three years and your car is 12 years old or older get ready to buy a new radiator. They're easy to install and they're not too expensive these days because they come from Mexico or off-shore suppliers. Keep this in mind: The higher the percentage of antifreeze in the coolant the less efficient the cooling system becomes. Antifreeze is an insulator of heat transfer. That's why race cars don't use it! If this statement is hard to believe, Look up Stewart Water Pumps on the net. They'll tell you that pure water is the best coolant to use for heat transfer purposes. In the real world we can't do that because of temperature fluctuations.
- Q: Yang Chengtai big, the pump power is too small, the water pump will be bad?
- Related to water pump structure, when the pump head is higher than the rated pump head, the current will increase, the water discharged from the pump impeller, back to the inlet of water from between the impeller and the casing exceeds the rated value, if it is a high lift pump, clearance between the impeller and the casing is small, the water pump current increases with increasing lift, current too much faster than the rated value, the motor will burn; if it is a low lift pump design, when the clearance between the impeller and the casing of the strict requirements, and even some of the water pump, the outlet is blocked, the pump will not burn. The drinking water pump used on the table, generally used non-toxic latex diaphragm pump, the head is too much, will damage the diaphragm part, the motor because the circuit has protection, the motor is not easy to damage. Generally do not risk good, according to the actual situation, select the appropriate lift, suction pump.Yang Chengtai large! If the pump power is too small! The pump will break! But not necessarily bad, mainly determined by the pump structure.
- Q: What is the difference between a sewage pump and a clean water pump? Why can't sewage be pumped with clean water?
- The main difference between water pump and sewage pump is that:Impeller and runner design, as well as other parts of the configuration are very different.1., in order to prevent clogging of sewage pump, the main design of large flow channel, so naturally lead to relatively low efficiency, so the head is generally not high. Clear water pump flow smaller, smaller clearance, the head is relatively high.2. in order to prevent the wound, water pump impeller design is more simple but not ring pump, equipped with tips, cloth and other debris can be crushed after the pump, and the impeller water pump is relatively complex, but the efficiency will be significantly higher than the former.Why can't the sewage water pump and impeller: because features of key design, resulting in water pump for sewage situation is likely to occur, blocking, winding, wear and corrosion occurs, resulting in damage to pump or scrapped, so water pump can not be used for sewage.Sewage pump is a pump and motor conjoined, and at the same time submerged into the work of pump products, and general horizontal pump or vertical sewage pump compared to the sewage pump compact structure, small footprint.The water pump is for the transport of water and physical and chemical properties similar to water and other liquids used, suitable for the industry and the city water supply and drainage, water pressure high-rise buildings, garden sprinkler, fire booster, long-distance transportation, HVAC refrigeration cycle, irrigation, bathroom, cold and hot water circulation pressurization and equipment.
- Q: do I need to replace it again ? How hard is it to change the water pump? Any Idea where on the internet I can download a free maintenance manual or replacement instructions ?
- If it were mine, I'd replace the belt again anyway, coolant can accelerate the wear or advance rotting of the belt. The waterpump is driven off of the timing belt so you'd need to make sure you have it all set up to TDC and all marks aligned before removing the belt. Then just remove the bolts to the water pump, scrape away all old gasket material and install new pump, torque bolts to specs w/ micrometer (in lbs) but before you can do all that, you have to remove all components on the front of the motor. Long story short...let a shop do it for you!!!
- Q: Hello, I have a 1996 Cavalier and it's got a small coolant leak by the water pump so I figured I'd replace it. I called around a little bit and one quote was $250. I'm sord of handy and have a few hours on Saturday is it that hard? I heard it's just a few bolts? Thanks!!
- The water pump on that vehicle is a ob-centric style that you rotate to create belt tension. This is a bit tricky and some people have broken the pump trying to tighten the belt so be careful. Look at the replacement pump carefully before you attempt to change it, this will give you clues as to how it works.
Send your message to us
Vertical High Pressure Jocky Pump for Fire Fighting System
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
