Stain Steel End Suction Centrifugal Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Stain Steel End Suction Centrifugal Pump
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product Parameters of Stain Steel End Suction Centrifugal Pump
| Capacity: | 6.3~400m³/h |
| Head: | 5~125m |
| Speed: | 2900r/min and 1450r/min |
| Power of fitted motor: | 0.55~90kW |
| Inler diameter: | 50~200mm |
| The max working pressure: | 1.6MPa |
Application Range of Stain Steel End Suction Centrifugal Pump
1.Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate,
paper making, washing for mining and cooling for equipment.
2.Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc.
3.It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoise, consistency of solid can not exceed 30% of total medium).
Stain Steel End Suction Centrifugal Pump Features
1. Resistant to acid, alkali, wear and high temperature.
2. High mechanical strength, steady performance, good tightness.
3. Convenient operation and durable.
4. Be able to transport water that under the position it was installed. No need for filling liquid after the first time it was used.
Stain Steel End Suction Centrifugal Pump Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Pictures show
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
|
|
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
| http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q:Ok i was wondering which is the from hose off of the motor the bottom or top since i thinl my heater core hose are reversed and i only get nuke warm air and not hot and yes ive got a brand new heater core, new anti freese, new thermostat and gaskets and all hoses are clear and not rust in the system
- My husband and that i agree 3 hundred%. He has a seventy six with 296,000 mi.-on no account any artwork achieved different than recurring maintenence. I had a sixty 3 that I drove for 19 years and offered back to unique proprietor in 1992-it nevertheless runs large. It had a 327(finely tuned) and have been given 31 mpg hwy. there replaced into room to artwork below the hood, certainly become conscious of factors and do maintenance, or jury rig till an entire restoration replaced into made. Have an 80 5 now and not something yet issues!!! Sorry I enable the sixty 3 pass-he won't area with it. the only progression in extra present day is stereo, no longer the automobiles themselves. a visit to wrecking backyard will demonstrate extra extra present day ones than older. information do no longer lie. save your truck!!!
- Q:Every time i turn off the engine i hear like liquid noises behind the dash board in the drivers side. My fan isnt working properly but i just took a trip...4 hours away.. on the highway the temperature would be fine but on regular streets my temperature goes high pretty fast..i have been putting anti freeze pretty often lately because it goes low but there is no signs of a leak anywhere. Could it just be that my fan isnt working properly or is it because the water pump is going bad? or both? I have a 93 Toyota celica
- Not it's because you have a cracked cylinder head. Does the exhaust spew out a lot of white smoke? Edit: Having a blown head gasket does not explain the missing coolant. If you had a misfire or the engine was struggling a little then yes the head gasket would explain that. If you've never seen white smoke from the exhaust or under the hood, then I would say it is because the fan is not working properly. The gurgling that you hear is the boiling water going from the radiator to the reservoir tank. It is probably overfilling the reservoir tank and evaporating as well.
- Q:okay i just put a new camshaft in my truck and before my water pump seemed to work but it leaked a little bit but my truck never got hot well i drove it a little bit after puting in the new camshaft and the top radiator hose and heater hose was warm but the bottom radiator hose was cold so i think my water pump went out but not to sure thanks to any answers
- when your water pump goes out, either it will leak from the weep holes which are the holes drilled in the pump by the manufacturer or around the pulley. If that is happening then its your pump. The other thing to check would be your thermostat, check this by turning your truck on and leaving the lid of the radiator. check the temperature of the water in the radiator with your finger if it warms up in ten minutes then its not your thermostat, if the water level goes down ( like lack of water) then its the pump.
- Q:Pump adapter joint net outside tube, what is the principle?
- At once the room after the fire, the internal fire pool once water shortage, the water tank can be within the fire truck hit the water chamber through the pump adapter connected to the fire extinguishing effect.
- Q:I have a toyota supra 83 Mechanic said water pump is leaking into engine causing white smoke. He said that hell have to replace water pump nd all gaskets estimated about 500+$ is this accurate? Also water resevoir mysteriously loses water can it be a symptom?
- Sounds fair to me. if it's a 7mgte have him do the timing belt while he has it all apart.
- Q:do I need to replace it again ? How hard is it to change the water pump? Any Idea where on the internet I can download a free maintenance manual or replacement instructions ?
- Since okorder , click on Repair Info on the left, select Vehicle Repair Guides, and then input your car model. All the instructions you need are in there.
- Q:How do you remove the water pump from bmw m42 engine?
- Follow the instruction manual Drain the water first then remove the timing case release the tension from the belt, unbolt it and remove.
- Q:4--6 inch deep well pump head? How much per hour out of water?.
- Deep well pump head is based on how much the impeller, impeller 200QJ section is 11 meters lift, 250QJ is about 17 meters, 300 meters high lift, 4 inch flow in 80 to 100 tons per hour, 6 inch flow in 150 to 200 tons per hour
- Q:Work done in water pumping?Water is to be brought from a well 60 meters bellow ground level to a tower 10 meters high, once there the water falls freely on a 5000 liter tank. A submerged pump 10 meters under water level and a two inch diameter pipe is to be used. What is the work done by the pump when 2000 liters have been served to the tank; what is the power of a pump selected to do this work in 20 minutes.
- Power_W = (Mass_kg * Gravity_m/s/s * Height_m) / time_s Where: Mass kg is 1kg/l of 2000 liters Gravity is 9.81m/s/s Head is 60m + 10m (height). The suction head is ignored because the pump is submerged. In practice there is some suction head due to intake restrictions like pipes, check valves, strainers. The time is 20 minutes in seconds. The work is the energy used in the time allocated, which is: power * time in seconds, which is watt seconds = joules. Not needed here as it is in the formula above. Power is the rate of doing work. The depth below water is not really relevant except for pipe losses which increase the head slightly. The flow is 2000 liters/20 minutes = 100 l/min. This can be used with the head of 70m to determine the pipe restriction, which amounts to a pressure drop representing extra head added. It will indicate whether the pipe is too small (excessive head added) or whether the pipe is overkill (no head added). You can find on line calculators for this, e.g. search pipe resistance flow on line calculator. I am guessing a 2 inch pipe has little loss at this flow. This is the so called water power. It is the output power of the pump. The pump may only be 50% or so efficient, so the mechanical power delivered by the motor needs to be greater by this ratio. The electrical input power to the motor is greater again to allow for motor efficiency. This might be 60-90%. In practice the efficiency of pump and motor are determined from user manual or specification of the actual devices with the actual loads (head and flow).
- Q:Level 200 meters distance, elevation 30 meters, how much lift water pump?
- According to the horizontal distance of 10 meters is 1 meters lift, 200 meters is 20 meters and 5 meters height difference of 30 Mega elbow, pump head floating down 10%, should be about 60 meters.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Stain Steel End Suction Centrifugal Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
