Stain Steel China Made Centrifugal Slurry Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Stain Steel China Made Centrifugal Slurry Pump
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product Parameters of Stain Steel China Made Centrifugal Slurry Pump
| Capacity: | 6.3~400m³/h |
| Head: | 5~125m |
| Speed: | 2900r/min and 1450r/min |
| Power of fitted motor: | 0.55~90kW |
| Inler diameter: | 50~200mm |
| The max working pressure: | 1.6MPa |
Application Range of Stain Steel China Made Centrifugal Slurry Pump
1.Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate,
paper making, washing for mining and cooling for equipment.
2.Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc.
3.It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoise, consistency of solid can not exceed 30% of total medium).
Stain Steel China Made Centrifugal Slurry Pump Features
1. Resistant to acid, alkali, wear and high temperature.
2. High mechanical strength, steady performance, good tightness.
3. Convenient operation and durable.
4. Be able to transport water that under the position it was installed. No need for filling liquid after the first time it was used.
Stain Steel China Made Centrifugal Slurry Pump Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Pictures show
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
|
|
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
| http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q: i need the location of the water pump or for the thermostat thank you
- The water pump is timing belt driven and is under the plastic timing cover on passenger side. These water pumps have a history of breaking, due to the fact they have a plastic impeller and it shears off the shaft, which causes the engine to overheat. First you want to remove the thermostat and then check the water pump. Follow the lower radiator hose to where it connects to the engine. That flange is where the thermostat is at. After you remove the thermostat you can shine a light in the hole and put your finger in there, if the impellar of the water pump moves, it needs to be replaced. If it does, then you might as well replace the timing belt and tensioner, seeing how you have to remove it to get the water pump off.
- Q: We have an electric sump pump. Battery pumps will only work for two or three days. I want a manual pump that will pump a lot of water. We cannot waterproof the basement because it costs over $10,000. Where can I find a manual pump? Carrying water out in buckets is too slow and exhausting. We carried 80 five gallon buckets out last time the electricity was off for a few hours.
- There okorder ... They are typically installed as back up to the electric powered one and will only come on when the electric has failed. they use a siphon action that is supplied by water flowing through a pipe so they use a lot of water but as long as your house has water pressure they will keep the basement dry. When the electricity comes back on they shut off because their float switch is activated at a higher level that the electric ones.
- Q: I recently bought a 1992 Honda Accord. It has high mileage but the records kept on it were impecable up to about the last 3 years. I have read that you need to replace the timing belt/water pump every 80k miles. However; I do not know when it was changed last. The Only record in the book on the subject was back at 90k miles. That was the first time they had the timing belt changed.So How do I know its time to change it again? The car now has 199k miles. I do not want to do unnecessary work before time, however; I also know that the affects it will have on the engine is great if its not done within the right TIME! Is there anyway to know it needs to be done? What kind of signs will the car give? And how much is it going to cost me when it has to be done? Thanks!
- A water pump is mostly pretty obvious when it is going/gone it chirps it squeaks and your temperature will usually be higher than it usually was [not always]. As for a timing belt... they are relatively inexpensive, the labor isnt that bad since the car is VERY easy to work on, and it is difficult to tell when one is needed since the most it will make is a whining noise when its getting weaker, only sometimes though. This is hard to hear too. Best advice I have is to just get a couple appraisals/estimates, or have a friend who is mechanically savvy take a look to see if he/she can tell if the belt is worn to the point where it needs replacing. I had a timing belt done for $120 parts and labor on a 91 accord (same car)
- Q: is there a surface water pump that can pump water from a 1000 foot well?
- If what you mean with surface water pumps are those pumps mounted on the ground to distinguish them from submersible pumps , yes there are surface pumps that can pump water from a 1000 ft well. These are the so called jet pumps or deep well pumps wherein part of the output water is returned back to the bottom of the well pipe through the space between the outer pipe casing and the inner pipe and passed through a venturi opening to create an upward water jet which will push more water upward.
- Q: i have a 97 mercury mountaineer and i recently got the thermostat changed in it. after doing so we noticed that the car was leaking antifreeze. we checked to make sure everything was tight and there was no cracks and my uncle said he thinks its the water pump how can i tell
- if you cannot tell where the fluid is coming from, ...the pro's put dye in the fluid then use a black light and use gravity as the rule to find the leak. generally it is the seal that makes a water pump fail...which makes is leak out a weep hole. I think its a coincidence you changed the thermostat and the pump seal went out.
- Q: gould water pump model Jo5n
- The first thing is your static water level has to be above 20 ft. Static water level is where the water is at from ground level. With a shallow well pump It is difficult for the pump to lift the water and if you can get the water to lift your water pressure will suffer dramatically. I do this kind of thing for a living feel free to e-mail me if you want.
- Q: The wiper pump is broken. How much will it cost to fix it?
- Hello, the wiper motor is broken, can only be replaced to solve the problem, different models of price difference is too large, general average car about 60-80. You can go to a few repair shop to ask, OK, you can also match the city or Taobao purchase.
- Q: 2 pumps in parallel, lift the same, the pump head is not stacked; 2 pumps in series, the same flow, pump head is not superimposed?.
- 2 pumps parallel, lift the same, pump head is not stacked?;Answer: the head can not be superimposed, that is, a lift and a pump, but the pumping speed (flow) is two times a taiwan.2 pumps in series, the same flow, pump head is not stacked?.Answer: the head can be superimposed, that is, the pump head is two times as much as a pump, but the pump speed is the same as that of a pump.
- Q: 99 Cherokee I6. There is low pitched noise coming from the area of the water pump and alternator. Like a grinding grumbling. The water pump pulley is not loose and will not rock back and forth. Nothing is leaking. Tomorrow is forecast as icey and I have a choice of sending my wife 30 miles each way to work in the Cherokee or a 2005 Mustang, which is absolutely terrible in the snow or ice. I can get the car into the shop on Thursday for diagnosis and repair. Since the pulley is not loose I am thinking it will be OK for another day even if it is the water pump bearings. Thoughts?
- Check the Tensioner pulley it is next to the power steering pump. It is the most likely part to fail, and make this noise. Be Careful and place a long screwdriver on a none moving part of each part you suspect. If you carefully place your ear on the handle you can tell which part is the loudest. The engine will be running so please be careful or stop off at your local mechanic and have him fix it first. If it is a slight rumble you'll most likely be ok. If it is a loud grinding have her take the mustang or the day off.
- Q: HelloI am building a small budget underground room. On top of a very waterproof and airtight (besides vents) building, and running a dehumidifer inside, I would like to install a pump underneatth the foundation to suck out water from the soil surronding the building but I'm not sure what kind of pump would be best?Also how would b e the best way to set this up?
- What you want is called a sump pump. Most have a system built into them that is triggered by rising water. The idea is to have a hole beneath that allows the inevitable water that will collect a place to go, then when a certain amount gets in the hole, the sump pump comes on and pumps it out to wherever you have the hose or pipes ran to. Being underground, good luck keeping the humidity level down. It won't be easy, and much depends on where your natural water table is, and what it is during rains. Someone in your area might know all that, I don't.
Send your message to us
Stain Steel China Made Centrifugal Slurry Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
