Stain Steel 6-Inch Centrifugal Water Pump China Made
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Stain Steel 6-Inch Centrifugal Water Pump China Made
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product parameters of Stain Steel 6-Inch Centrifugal Water Pump China Made
| Capacity: | 6.3~400m³/h |
| Head: | 5~125m |
| Speed: | 2900r/min and 1450r/min |
| Power of fitted motor: | 0.55~90kW |
| Inler diameter: | 50~200mm |
| The max working pressure: | 1.6MPa |
Application Range of Stain Steel 6-Inch Centrifugal Water Pump China Made
1.Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate,
paper making, washing for mining and cooling for equipment.
2.Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc.
3.It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoise, consistency of solid can not exceed 30% of total medium).
Stain Steel 6-Inch Centrifugal Water Pump China Made Features
1. Resistant to acid, alkali, wear and high temperature.
2. High mechanical strength, steady performance, good tightness.
3. Convenient operation and durable.
4. Be able to transport water that under the position it was installed. No need for filling liquid after the first time it was used.
Stain Steel 6-Inch Centrifugal Water Pump China Made Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Pictures show
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
|
|
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
| http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q: need to know the electrical connections for a Square D water pump pressure switch..Have a quot;blacka quot;Redand the quot;ground quot;of course
- The two source wires connect to L1 and L2. The two pump wires connect to T1 and T1. The grounds get grounded. When the pressure falls, the contacts pull together and connect L1 to T1, and L2 to T2, and start the pump.
- Q: I have an 8 gpm pump at a depth of 170 ft, I am pumping the water 2000 ft in a 1 1/4 inch line. I need to know how many gallons per minute I am getting.
- Use the Bernoulli equation, aka mechanical energy balance.
- Q: How much does it cost to have either the thermostat or water pump fixed on a car?
- Like most answerer's, I agree. The task is easy if it is the thermostat that is the prob. You could even do this yourself, if you are so inclined. But if it is the water pump, though the part may not cost much (depending on make and model of vehicle), almost the whole front of the engine will need to be removed to get to the water pump. No matter who does the work for you, also ask them to look at your radiator hoses (top and bottom), too. Many times, when a thermostat has stuck or a water pump has failed, the hoses get stressed and if they're not at least looked at, and ok'd.. uld be the cause of your next problem. Another thing to have checked is all your belts. Most vehicles nowadays have only one belt (serpentine belt) that runs everything, older vehicles have a few belts. All of these belts will have to be removed if the water pump is replaced, so have them looked at when they are off the vehicle, just in case. Talk you your friends to find someone who could do the repairs for you, either a shop or a shade tree mechanic. The whole job shouldn't take more than an hour or two, depending on vehicle and ability of mechanic. Sorry we're not local or it would have been fixed already.
- Q: The water pump gasket in my '98 Forester (130k) recently began to leak, and I will be replacing it in the next couple days. I noticed a stream of bubbles in my overflow container, though, and am wondering if it might be bad head gaskets making the air bubbles. The bubbles only appear after the engine is warmed up, like after a drive around town - there aren't any bubbles when the engine is cold.Is it possible that these air bubbles are coming from the leaking water pump? I hope so, because I'd much rather replace the pump than the head gaskets!
- You have a blown head gasket
- Q: how to change a water pump on a 99 ford tauras?
- simple: goto your nearest auto repair shop. Don't try to do anything yourself. especially those tauras
- Q: I am trying to change my daughters 2004 Grande Am water pump because people tell me it is squealing. We purchased a replacement pump and blue gasket glue. I know to remove the Serpentine belt (not sure which pulley to reduce tension on) then I need to know which bolts to un-tighten, won't the pump turn as a use the wrench? Is there a good video available on changing out the water pump? I've done maybe 5 water pumps in my lifetime all on V-8s with rear wheel drive, so they had easy access. Does anyone know the steps of removal or can someone point to a video of removal replacement?
- better make sure it,s not the belt squealing and not the pump. usually when a water pump goes out they will leak. i would be checking the belt first.
- Q: How can the pump be stationary?
- Rusty, turn with your hands to see the situation, the two bearings filled with lubricating oil.
- Q: The water pump on my 1997 corolla has been leaking, I want to replace it by myself. I did some research online, and get the diagram of the engine structure. It seems to me it is not very hard to do, but who knows, it might end up being a very tricky job. Did anyone replace the water pump on 97 corolla before? How difficult was it? Two things I actually worry: 1. It might be hard to unbolt the water pump pulley, because there is little room insert a wrench. 2. Also, because of the lack of room, it would be also hard to unbolt the timing belt cover (the 2nd/middle cover). A shop gave the quote of $440 to replace the water pump, and I think I should be able to do it myself.
- it is the water pump. you will be bettor off letting the shop put it on because if you don't have the right tools DO NOT TRY TO DO YOURSELF. the water pump is right in front fan motor all that has to come off to get to the pump.
- Q: I want to know the disadvantages of a wind powered water pump and if you have any questions you would ask to someone presenting to you about a wind powered water pump(They should be really hard and smart questions) please include them in your answer.Thanks in advance.
- Disadvantage: No wind = no water Questions: 1. What is the minimum wind strength that would cause the pump to operate? 2. What is the maximum wind strength before the water pump needs to be disconnected for safety reasons? 3. What is the frequency of maintenance for the wind turbine and the water pump? 4. What is the conversion ratio from wind velocity to water flow rate?
- Q: The dry season river dock company from the wharf area maximum height difference of 17 meters, is the need to purchase pumps for wharf surface wash pump water, the pipeline outlet pressure to the ordinary fire water pump pressure standard, the best do not directly into the water, can be placed in the dock or wharf surface from 10 meters (below three terminal position floor, 6 meters on average one floor), to facilitate the maintenance of. What type of water pump is the best choice? What brand is the best choice at home and abroad?! Be deeply grateful！
- ZGD1.5KW screw pump, lift 120 meters. Caliber inch. High pressure. Screw type. It can absorb more than 30 meters of water.
Send your message to us
Stain Steel 6-Inch Centrifugal Water Pump China Made
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
