Insulated Power Cable 0.6/1kV XLPE - CNBM
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1. 0.6/1kV XLPE INSULATED POWER CABLE
XLPE insulated power cable has a number of advantages over paper insulated and PVC insulated cable.XLPE power cable has high electric strength,mechanical strength,high-ageing resisting,environmetal stress resisting antichemical corrossion,and it is simple construction,using convenient and higher operating of long term temperature.It can be laid with no drop restriction.
Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free,and non-smoke nonhalogented and three classes of A,B,C.
Our XLPE power cable can be manufactured according to companys specification which is equivalent to IEC 60502,IEC 60332,and IEC 60754.Some of indexes are superior to above international standard IEC.
Some of special XLPE power cable can be manufactured according to the other standards required by customs.
XLPE power cable having higher long-term working temperature and greater current rating,at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable.This is not only improve the quality and properties of products,but also reduce cables production costs.
2.Scope of XLPE Power Cable
Type | No. of Cores | Nominal Cross-Section of Conductor(mm2) |
YJV YJLV YJV YJLV YJV22 YJLV22 YJV23 YJLV23 YJV32 YJLV32 YJV33 YJLV33 YJV42 YJLV42 YJV43 YJLV43 ZR-YJV ZR-YJLV ZR-YJY ZR-YJLY ZR-YJV22 ZR-YJLV22 ZR-YJV23 ZR-YJLV23 ZR-YJV32 ZR-YJLV32 ZR-YJV33 ZR-YJLV33 ZR-YJV42 ZR-YJLV42 ZR-YJV43 ZR-YJLV43 | 1 | 1.5--1000 |
2 3 4 5 | 1.5--400 | |
3+1 4+1 3+2 | 2.5--400 |
ZR- covers three classes A,B,C of flame-retardant cable.It can be expressed as ZRA-,or ZRB-or ZRC-separately.For example:ZRB-YJV,or ZRA-YJV22.
FAQ:
①How about your company？
A world class manufacturer & supplier of castings forging in carbon steel and alloy steel，is one of the large-scale professional investment casting production bases in China,consisting of both casting foundry forging and machining factory. Annually more than 8000 tons Precision casting and forging parts are exported to markets in Europe,America and Japan. OEM casting and forging service available according to customer’s requirements.
②How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The pecific time of receiving is related to the state and position of customers.Commonly 7 to 10 working days can be served.
- Q: Hello, can somebody help me connect 2 computers in playing Starcraft v1.07 using a cross over cable. Thanks in advance.
- Sure. You need a crossover cable, plug one end into one computer and the other into the other. Go into your network settings in network control panel. 1) In the this connection uses box go to TCP/IP and click properties. Instead of automatically assigned IPs, change them to two IPs on the same network, for example make one 10.10.10.1 and the other 10.10.10.2. Click OK. 2) Start starcraft on 10.10.10.1, and create a LAN game, on the other Join a LAN game, the one on 10.10.10.1 will show up. 3) omgzergrushLOL
- Q: How is the electricity inside the elevator coming? What about the lights, the wires go up and down?
- I do not think so that the master to do the right pipe to be in the following wire to be more appropriate in the above wire and water pipe interchanges or PUC casing tube tube PUC pipe straight head to use PUC glue bonding reasons: 1. Water pipe in the On the wire if the water pipe under the water pipe that is every day in the wet underground or in the water bubble, security risks 2. If the wire with a yellow wax tube package, although the yellow wax tube is a fire-retardant water, but a long time in the water bubble Or the wet place of its material (I suggest you compare the yellow wax tube and PUC tube material to know) no matter how good my judgment is the water pipe slot is relatively shallow do not go down the line of the master with the yellow wax tube The
- Q: I have purchased new handle bars and controls and I a having trouble trying to figure out what is holding the brass piece into the old throttle control so I can remove it and connect it to the new control.is it a very tiny C clip?Does it just come out if you pull had enough?it does not appear to unscrew. What is the deal here? It is stopping everything.The cable cannot be disconnected from the old control until I figure this out.
- When you say brass piece, are you referring to the tiny barrel at the end of the cable, where it attaches to the throttle sleeve? If so, then it should just slip right out. I think you might be talking about the elbow coming out of the bottom of the throttle housing. If the bike is 1996 or later, they are held in place by a small compression ring, and to take them out you have to pull and twist while pulling. a little wd 40 will help. they can be a real pain to disconnect. As another stated, they are sized differently so they cannot be put on wrong. Be sure you loosen the throttle cables and take them out of the throttle sleeve before pulling the elbow loose. For 1995 and older bikes, the elbows are threaded and a small 7/16 or 3/8 wrench is all thats needed to release them.
- Q: Control cable djypvp22-4 * 2 * 1.5 What does it mean?
- There is no such need at all. You only need to switch to a Gigabit router on any line (because the Gigabit router has reached your fiber home requirements, and do not need to pay expensive optical converter and fiber purchase costs). Gigabit router recommended netcoreNR285G / NR255G. If you really want to change the fiber, first of all you have to solve the machine with several loom of the fiber LAN connection problem, the two are you have to decide to buy finished fiber access, or to buy bulk fiber itself then (you can be responsible to tell you, If you are the latter, although the fiber is a few dollars a meter cheaper, but you need a fiber splicing machine welding fiber, this machine as long as the fiber is very expensive, about 1 meter will be eighty to ten hundred 3-5 million, as many as .000 + have, of course, if you can borrow and you will then pick the line), so under normal circumstances I do not recommend in their own homes get all the fiber LAN, so maintenance will be very troublesome. hope this helps.
- Q: I just purchased a house and the previous owners had a Pioneer Elite Plasma TV mounted in the main room. When the Pioneer Elite cable was installed, it was stapled to the studs so it can't be pulled out. Not only does the cable go up in the wall from the floor to the middle of the wall, but it also goes to the left for about 5 feet. Is there a way to use the cable and convert it to HDMI plugs? I don't want to tear into the wall but if I can't convert the PE cable to HDMI I have no other choice. Any suggestions?
- This Site Might Help You. RE: Converting a Pioneer Elite Plasma cable to a HDMI cable? I just purchased a house and the previous owners had a Pioneer Elite Plasma TV mounted in the main room. When the Pioneer Elite cable was installed, it was stapled to the studs so it can't be pulled out. Not only does the cable go up in the wall from the floor to the middle of the wall, but
- Q: i connected my laptop to my tv using and hdmi cable. it shows up on the tv but when i try to watch videos or listen to music i cant hear any noise coming from the tv, and it keeps coming from the laptop.how can i get it to sound on the tv?
- If you already have audio cables connected, then all you need to do is start -Control Panel -sound -right click on HDMI Output and set as default device.
- Q: Ask you master, I have a 50-core control cable, a lot of color, but I do not know how to distinguish and wiring, wire diameter is 0.5mm. I heard that seems to use color to distinguish, but the color too much, specific How to distinguish it, ask the Supreme to help! Question added: the color of each line is different, you said the core method I can try, but I see them when they do not use the line number, asked how can we do, they say by distinguishing the color, I do not understand How to distinguish so to ask about. But thank you more
- . unless it is re-cable, otherwise the line is certainly not pumping, whether it is horizontal enough vertical or straight 2 If your home is the floor of the floor, in particular, proposed to take horizontal and vertical, in case of playing wood stunned wire Wear it is not worthy of 3 to facilitate the late maintenance, electrician can identify the direction of the cable according to the socket 4 do not save that point, boring, safe or the first electrical practice norms, home improvement quality acceptance norms, there is this requirement, The state has a certain standard, which is specific, I also forgot.
- Q: I'm curious about the technicality of an Auxiliary Cable. - The bandwidth ? - Is it compressed or loss less sound?- Why is it so universal?- How many channels? I'm guessing 2?Let me know I'm very intrigued about this surprise I cannot find anything online. Thanks.
- an aux cable is generally a 3.5mm outlet/cable its capable of actually 3 channels, so it can transmit 2 channels (stereo) and receive a signal for controlling functions from things like iPods to control volume and such.
- Q: I set up my cable box yesterday and the tv will show me the menu and tell me what's playing on the channel but every channel is just a black screen, how do I fix this?
- The cable box needs to be addressed (turned on) before you can use it. That's how they control who's box works and who's doesn't.
- Q: i connected the usb cable to the wii with my wii on but the charger won't charge my controls.
- Call the Wii customer service phone number and ask them. I hope they are able to help.
Send your message to us
Insulated Power Cable 0.6/1kV XLPE - CNBM
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
