10Kw Electric Stain Steel Water Centrifugal Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
10Kw Electric Stain Steel Water Centrifugal Pump
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product Parameters of 10Kw Electric Stain Steel Water Centrifugal Pump
| Capacity: | 6.3~400m³/h |
| Head: | 5~125m |
| Speed: | 2900r/min and 1450r/min |
| Power of fitted motor: | 0.55~90kW |
| Inler diameter: | 50~200mm |
| The max working pressure: | 1.6MPa |
Application Range of 10Kw Electric Stain Steel Water Centrifugal Pump
1.Suitable for environment protection, construction, fire fighting, chemical pharmacy, printing, dyeing, brewage, power plant, electroplate,
paper making, washing for mining and cooling for equipment.
2.Application as sprayer equipped with beam nozzle that turning water into little drop irrigation for farm, garden, etc.
3.It is suitable for clear water, sea water, acid or alkali chemical medium and slurry (viscosity≤100 centipoise, consistency of solid can not exceed 30% of total medium).
10Kw Electric Stain Steel Water Centrifugal Pump Features
1. Resistant to acid, alkali, wear and high temperature.
2. High mechanical strength, steady performance, good tightness.
3. Convenient operation and durable.
4. Be able to transport water that under the position it was installed. No need for filling liquid after the first time it was used.
10Kw Electric Stain Steel Water Centrifugal Pump Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Pictures show
Why choose us
High Quality
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
|
|
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
| http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q:I have a 2000 Dodge Stratus and recently had the coolant drained (not quot;flushedquot;, as the mechanic wanted to charge $125 extra for that). Prior to that time I never had a single coolant leak, but since then, I've had the coolant leak out slowly over about a 2 week period of normal stop go traffic. Now the mechanic is saying the water pump is leaking, and that's going to be another $600+ more to fix (over 5 hrs of labor), which I really don't have the money for right now.So two questions.. 1) what could've happened to cause the water pump to suddenly start leaking only after the coolant was drained, when it was fine before that? and 2) should I try using a quot;Radiator Stop Leakproduct? I know people say they can plug up the whole radiator, but if that were the case 100% of the time, you'd think these products would've been made illegal a long time ago.SO realistically what are the chances of it doing more harm than good? I still plan on getting the water pump replaced, it'll just have to be awhile.
- No that crap plugs other little water ways that are needed to cool your engine. Things get old and it don't take much for them to start leaking. Changing this is not that difficult I would check out a couple more shops before thinking that would be the cost. Stay away from the dealers they charge the most.
- Q:need lincoln 01 water pump and radiator do 2000 parts fit an 01?
- We need to know what model of Lincoln you're working on. The water pump from an LS 3.9L isn't going to fit the 4.6L or 5.4L of a Aviator or Navigator. You must be more specific. The part numbers show it's the same water pump for a V8 2000-2001. I bet if looked further, it's probably the same pump up to the end of production on 2006. Don't forget to bleed the air from the cooling system when you complete the repair job!! You'll definitely have ovrheating issues if it isn't right. MAke sure it's the V8 (3.9L) pump and not the V6 (3.0L) pump.
- Q:Water pump. A drip on the edge of the pump or drip on the ground. Serious concern on which one?
- Once okorder
- Q:Ok, if my intake manifold wasnt mess up and it could be my water pump would I still smell a syrup odor and WHY would it be leaking green antifreeze? especially when the antifreeze I use is orange?
- Okay, I take it you've added orange anti-freeze to your cooling system. If the system originally had green in it- you just did something really expensive. The two kinds of anti-freeze don't get along. Mixing the two together then getting them hot makes them into a gel. SO, what you get to do now is a complete system flush(by taking the whole system apart-heater core, radiator, hoses, heater valve, the works) use some sort of flush product, and get a large tub. Then, after you've gotten an amount of it out, reassemble the whole thing, and with the engine cool-put some more flush agent in it. Then, take a garden hose- and fill the system. once it's full open the petcock and continue to use the garden hose to flush the system until the water comes out clear. Now, close up the system and run the car for a bit and check the bottom of the water pump to see if the weep hole is leaking. There is on just below the pump shaft. If that's leaking, the pump is shot. If that's not, then there could be a cracked head, or a bad head gasket. A few things to check for that are- if when the car is running, are there air bubbles coming out of the radiator(with the cap open)? Does it seem to overheat easily? Have you run the engine hot?
- Q:Plumber quotes installing system using cross-over valve which some way ties the recirculation through the cold water pipes. This sounds like a short-cut. Are there any disadvantages to this system?
- You may contact with Guru Contracting Ltd. They have 30 years of experience, with fully qualified plumbers and fully stocked vans. They do Plumbing repair, services and installation.
- Q:for a school project, i need to boil cold water using a vacuum pump. I did some research, but i still didn't find what i needed. I need to know what kind of pump i need for this, and where i can get one for cheap, since i will only use it for this project. if you know how to actually use it, you can throw that in as well. thanks!
- You can get a cheap hand powered pump at the auto store. They use them to vacuum airconditioner systems and check for leaks in vacuum operated controls.
- Q:My water pump broke on my volkswagen golf tdi so I took it to a garage. He charged me ?250 for a new pump and fitting. When I came to collect it he showed me the broken water pump, when I asked if I could keep the broken pump that was taken out of my car he said that there would be quite a quot;heftysurcharge for me to take it with me because they have to send them back to Volkswagen. I thought it was a bit strange. Is that normal?
- What you're talking about is what we in America call a Core charge. If I buy a new water pump for my car and take it home to do it myself, the pump is going to cost me $80. There is also a core charge of another $20 from the parts store that I use. So I'm paying $100 to take home my water pump. However, if I were to have brought in my old pump to exchange it...then I would only pay the $80 for the part. Or if I took it home at $100 and then returned the old one after I got my car fixed...then they'd give me the the $20 back. The reason for this is that a lot of companies can recondition these parts and make them as good as new. This is a hell of a lot cheaper than buying new components to make new parts. Say a water pump is leaking only because the seals in it are failing. They can take it apart, replace the seals (and anything that looks like it needs replacing, clean it all up, and put it back together. And that reconditioned water pump (which has a warranty that's the same as the new part and often times better) would usually be sold for $60. So likely that's what's going to happen to it. It'll go back to VW so they can re-manufacture it and recycle it for use in another car that needs a water pump.
- Q:When replacing the water pump in a 2007 Dodge Grand Caravan. Old one is loose, I'm about to lower the engine a little to get the water pump out. Before putting the new one on, do I have to do anything with the timing belt/chain?
- Depends on the engine size . If the pump is driven by the timing belt then yes , if the pump is driven by the serpentine belt then no .
- Q:My 2001 300M is behaving oddly. Occasionally it will gradually overheat after I have driven around for 15 or so minutes. Yes, occasionally. I took it to my mechanic who changed the thermostat and hoses. I then drove it on a trip on the interstate and over a mountain (140 miles ) It was fine with no signs of overheating. Then the next day when I drove to work in the city, the stop and go traffic had it overheating near the end of the trip. I've been able to keep it from going in the red by using the heater. After this happened most of the days, but not all, I took it back to the shop. He reported that the fans were working correctly and the only thing he could come up with is a weak water pump. He stated that when it did get hot, he was able to bring the temp down just by rev'ing the engine a little.Does that sound right? Any other ideas and how to test?
- If he said the temp fell by revving the engine one of two things either the water pump is going out the bearing is failing and faster RPMS is pushing the water pump inside to spin faster and the bearing is starting to catch and work and spon the propeller OR the radiator is plugged or needs to be replaced. If the radiator is going bad it could be restricting water and more RPMS once again is pushing the water through the radiator to cool it. The other thing it could be is a radiator cap if it is not holding pressure then it will cause the water inside to boil slightly and make it hotter also. I would by a new cap and do the water pump. Those are the two cheapest. If that doesn't fix it then do a radiator.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
10Kw Electric Stain Steel Water Centrifugal Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
