Stainless Steel Centrifugal Pump China Made Low Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Company Introduction
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product specification
XBD-L: VERTICAL SINGLE-STAGE CENTRIFUGAL WATER PUMP
XBD-DL: VERTICAL MULTISTAGE CENTRIFUGAL WATER PUMP
XBD-I: VERTICAL MULTISTAGE CENTRIFUGAL WATER PUMP (STAINLESS STEEL)
XBD-HY: HORIZONTAL CONSTANT PRESSURE CENTRIFUGAL WATER PUMP
XBD-W: HORIZONTAL MULTISTAGE CENTRIFUGAL WATER PUMP
XBC: DIESEL ENGINECENTRIFUGAL WATER PUMP
***
XBD-L vertical single stage fire pump is used to deliver non-grain clean water and fluids similar with water in physiochemical property.
It is mainly used for pressuring water supply in fire system; also it can be used for water drainage in factories and mines.
The flow range | 5~140L/S, |
pressure range | 0.31~1.5Mpa, |
motor power range | 0.75~160KW, |
inlet/outlet caliber | DN25-DN200mm |
Application
Mainly apply to delivery sewage water ,waster water and rain water contains solids and
fibres:
*municipal project
*building construction
*residential area
*industrial sewage treatment
*eviroment protect
*mining
pump superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Pictures show
Transportation
- Q: How much would it cost if I took it somewhere like midas?
- 1999 Mitsubishi Eclipse GSX New Estimate ? Near zip 92010 Estimated price range for your repair $535 - $841 Estimate Includes: Labor: $442 - $564 Parts: $93 - $277 Coolant 2 Hose Clamps Water Pump Water Pump Gasket Estimates exclude applicable taxes, diagnostic charges, disposal fees, and miscellaneous expenses. About this Repair: Water Pump Replacement for your 1999 Mitsubishi Eclipse GSX Best Practices When replacing the water pump, the drive belts may need to be removed. The belts should be replaced if they show signs of wear. The entire cooling system—including all the coolant hoses and fittings, radiator, coolant fan(s), and fan clutch (if equipped)—should be inspected when replacing the water pump. To help prevent future issues, we recommend replacing the thermostat when the cooling system has been opened for repairs (e.g. water pump or radiator replacement) or during a system flush. Common Symptoms Water pumps require replacement if they begin to leak coolant or become noisy. Leaking water pumps can result in damage to the drive and timing belts. A failed water pump can be caused be problems in the cooling system, such as a failing thermostat, radiator, or head gaskets. ? Learn more about Water Pump Replacement
- Q: I think my water pump has crapped out on my 1997 Jeep Cherokee. I have been leaking coolant for a few days now and there is a puddle under my Jeep after I turn it off and my reserve tank keeps emptying out on me. I replaced the lower radiator hose and still the same problem. It is not over heating so I am wondering if it IS a water pump problem? If it is, could I do the work myself?
- Special tools? What? They are real easy to do. You need only a 1/2 wrench, 5/8 socket, 9/16 socket, 8mm and 15mm. Remove belt (15mm to loosen tensioner pulley, then to loosen adjuster). Remove electric cooling fan (2 8mm bolts at top). Use 1/2 wrench to remove 4 nuts on viscous fan and remove fan. Remove water pump pulley (4 1/2 bolts). Remove hoses from water pump. Remove 2 5/8 bolts that secure water pump to P/S bracket. Remove 4 remaining 9/16 bolts holding water pump to block. Remove water pump. Installation is reverse. No special tools required. I've done hundreds of them and can do one in about 1.5 hours.
- Q: water pump
- Flow? Head? suction pressure? Type of pump if that matters to you? You'll get better suggestions if you provide as much information as is relevant.
- Q: I think my water pump is leaking and I want to replace it, but I can't figure out how to get the pulleys off. There is a large nut on the shaft that the pulleys are on, and I can't figure out how to remove it, or if the nut is attached to the shaft, and the entire shaft is supposed to come out, or how it's set up. Please help. Pictures would be great if possible. Thanks!
- With the belts ON - take a big wrench ( 12 crescent or ) and place it on the large nut holding the fan on. Carefully smack it counter clockwise, (lefty loosey) until it comes loose, The threads for it are on the pulley. remove the 4 or 5 bolts holding the pulley, ( a vice grip on the large threads will hold the pulley to help remove the pulley bolts. Remove the water pump. Clean the gasket mating area GOOD - when you think you have it clean - clean it again - You do NOT want to find it leaking when you are finished. Some prefer RTV silicone sealant -- I prefer permatex #2 non-hardening. Tighten all the bolts only slightly before the two final torque's are completed - do not forget to tighten in proper sequence similar to installing a wheel, (bolt 1 - 3 - 2 - 4), so as not to cause undue stress on one side or part of the new pump.
- Q: Is it a must to change the entire water pump since only driplets of anti-freeze leak out over a 7day period from the bottom of the pump? Can i simply change the gasket and make it all better? Water pump is pumping and making no noise, vehicle isnt over heating.
- Unfortunately, this usually requires a new pump. It's possible (but unlikely) that the gasket is leaking - more likely, the seal around the pulley shaft is the problem. Replacement is the only option. Usually, this is done at the same time as the timing belt - has this been done yet? If it was done before you got the car, its possible they tried to save a few bucks by skipping the water pump. This is usually a bad move - the pump almost always wears out at about the same time - but it is cheaper, if they were planning on getting rid of the car soon. And since one usually needs to be removed to access the other...you get the idea. Good luck!
- Q: One mechanic told me that my Toyota Corolla 2004 CE's water pump is leaking and I need to change pump and its belt costing me around $450. I took it to other mechanic today and he told that water pump looks good and no need to worry. I need to know how I can verify that water pump is leaking or not. Below are some facts of the car that I noticed myself.1. The engine collant level is above half level about at 70% 2. I started my car around 8.30 PM @ 90 degree F after break of 3 hours and the temprature gauge reach to half in 5 minutes.Please advice what can be done to determine the leak is there or not else I have to take it to other mechanic.
- This Site Might Help You. RE: Corolla Water Pump - How to test leak? One mechanic told me that my Toyota Corolla 2004 CE's water pump is leaking and I need to change pump and its belt costing me around $450. I took it to other mechanic today and he told that water pump looks good and no need to worry. I need to know how I can verify that water pump is leaking or...
- Q: how much would they charge me to change a water pump on my 1999 cadillac deville
- They always change the water pump and timing belt together while the engine is apart. Your 1999 is probably due for both things if they have not been done. I just had mine done on a Toyota Camry. It cost a thousand dollars. Remember that these two things NEED to be changed every so often..if either the water pump, or timing belt go while you are driving..your car will die right there on the freeway...even if you are going 80 MPH.
- Q: My 1998 Dodge Dakota V6 heater only gets warm, I have replaced the thermostat. I have back flushed the heater core. The heater hose coming from near the thermostat gets hot, but the hose coming from the heater core going to the water pump only gets warm. The large hose coming from the thermostat is hot near the engine, but is only warm near the radiator. Is the water pump bad? If I open the radiator cap there is no signs of circulation. How do I check the water pump?Thanks,Gene
- plugged heater core? the fact that the hose gets hot lets you know that the water pump is circulating coolant.
- Q: I have a 2001 2500HD duramax and it is leaking antifreeze under the truck. I leaks a a drop every second what could be causing this
- If you can narrow down the location to being from the actual water pump and not a line, It would be the seal in the water pump. The only option is to replace the water pump.
- Q: Hello, I have a 1996 Cavalier and it's got a small coolant leak by the water pump so I figured I'd replace it. I called around a little bit and one quote was $250. I'm sord of handy and have a few hours on Saturday is it that hard? I heard it's just a few bolts? Thanks!!
- Look in a good auto repair manual like Chiltons. The library gets them, if you don't want to buy one. Make sure there aren't any special proceedures or cautions. Clean the area and examine it well to make sure of what actually is leaking. Commonly a worn out water pump will leak through a weephole in its shaft housing where the shaft seal is- or was. Pay attention to the lengths of the bolts and if they are different sizes, be sure they go back in the right place. If the engine needs to have air bled out when refilled with coolant, read up on how to do that and execute that correctly.
Send your message to us
Stainless Steel Centrifugal Pump China Made Low Price
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
