Single Core and multi-core PVC Insulated and PVC Sheath Cable 450 /750 V NYM
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 3000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Single Core and multi-core PVC Insulated and PVC Sheath Cable 450 /750 V Production Introduction for Single Core and multi-core PVC Insulated and PVC Sheath Cable:
Voltage Rate: 300/500V, 450/750V
Cores: 1~5 cores
Range of Nominal cross section: Single core: 0.75 mm2 ~ 630 mm2
Multicore core: 0.75 mm2 ~ 120 mm2
Conductor: Class 1/2 Plain annealed copper wires, solid or stranded
Constructions: Insulation: PVC
Sheath: PVC
Core color: Brown, Grey, Black, Blue, Green/Yellow or others on request
Max. Operating Temperature: 70℃, can be 90℃,105℃as per requirement
Packing: 100 meter/roll for small size, wooden drum for big size, or as per requirement
Application for Single Core and multi-core PVC Insulated and PVC Sheath Cable:
These cables are used for general purpose, as building wire for power, lighting and control wire to electrical appliances, suitable for use in conduit and for fixed, protected installation.
Production Standard for Single Core and multi-core PVC Insulated and PVC Sheath Cable:
I EC 60227, GB/T5023, VDE0281, BS6004
The Feature for Single Core and multi-core PVC Insulated and PVC Sheath Cable:
The cable can be of flame retardance, fire resistance and other property
Packing photo for Single Core and multi-core PVC Insulated and PVC Sheath Cable:
FAQ For Single Core and multi-core PVC Insulated and PVC Sheath Cable:
Q1:What is the Production Capacity for your factory?
About 50 kilometer every day
Q2: What is the Minimum Order Quantity For Single Core PVC Insulated Cable 450 /750 V?
MOQ: 10000 meters for small size, 5000 meters for middle size, 1000 meters for big size
Q3:What is the delivery time for these cables?
10~15 working days
Q4: What standards is the product complying with?
We can produce thousands of electric wires and power cables complying with different standards, such as: GB, JB , IEC, BS, AS/NZS, VDE, UL ETC.
- Q:I don't do a lot of stuff like this, so I'd appreciate some information about how to do this: basically, I'm trying to route a coaxial cable from outside into the house. The cable is outside, and needs to go through the outside brick layer, then through the wall itself (through insulation?) then through the drywall (through a new outlet plate too).Any suggestions about how to go through the wall with a wire? I'd even appreciate a link to a how-to site as well.Thanks.
- Wall Cable Pass Through
- Q:everything was working great! and then i blew the main fuse! i replaced it everything was fine after that but then out of nowhere i only have power in half of the power cable connected to the amp!! What can i do??
- I okorder /... Under the column for 90 degree cable in copper pick the wire gauge that is closest to your amp requirements without being under. For example: 1200 watt amp = 100 amps of power 2 gauge copper can handle 130 amps (This chart is missing 3 gauge which some places do carry, which can handle 110 amps) 4 gauge is only good for 95 amps. These ratings are about heat build up from inductance of the current. When the heat exceeds the rating, the sheathing melts and conductor degrades at it's weakest point. I recommend use of THHN electrical wire. It is gas and oil resistant and has heavy strands that hold up well to the stress of vehicle install situations. If your wire and fuses are properly sized, then check all of your connections. Often times heat and vibration will loosen screws on amplifier contacts. Also, under the hood, heat can melt your fuse holder causing plastic to coat the contact points (in which case you'll need a small file to clean the contacts) There's really a lot of possibilities here and your question is quite vague and convoluted. Please give more details or take some time and analyse the problem carefully. Chances are that you will discover the source of the problem in a matter of just 15 minutes or so of checking.
- Q:The power button doesn't appear to be wired correctly. I press it and nothing ever happens. The only way to shut it down is to forcefully remove the power cable. My PC also does not shut down when I select shut down in the start menu. It just restarts.
- open a comman propt/terminal for windows type: shutdown -s for linux/os-x: shutdown -now
- Q:I was looking at buying the MSI HD6850 cyclone OC/power edition but on the msi website it says it includes an external power cable. Am I missing something? Do I need more than the standard pci-e 6 pin connector from the PSU?
- Some graphics cards require you to connect a power cable to the board. As it requires more power than it can get through the pci connection.
- Q:I know Ethernet cable is much more susceptible to electromagnetic interference than fiber optic cable, but is fiber completely immune to it? I want to wrap a fiber optic cable around a 230 volt power line going through my attic for about 150 feet. Will this cause problems?
- Hi There, The 220 volt AV power cable will not cause any interference but it is not a good idea. The fiberoptic cable should be ran separate. It is a little more work but the right way to route the cable. You have to be very careful not to exceed the bend radius and wrapping around an existinf power wire might cause a problem. =====this is from the link below======= Do not install a fiber optic cable in a conduit or duct that already contains cabling, regardless of the cable type. Existing or new empty ductwork can be modified to accept several different installations by the placement of innerduct within it. ======================================... Hope this helps, Al
- Q:What is resistance of the cable (resistivity of copper is1.7x10^-8)Answer is 14 ohms. But please explain how do we get there in full detail.
- Find total cross sectional area of copper in cable ie 12 * area of one. calculate the resistance of 1 m then multiply by 2000.
- Q:I have a cam camcorder battery charger power cable and I want to use it as a ps1 power cable. Is It possible. The both look the same.
- The charger isn't meant to be a capacity source, purely a charging source. As such, with out battery, this is voltage will selection badly whilst a load is utilized and would land up adverse the stereo and/or the charger.
- Q:I dont understand what it says about Peak and sustained power, also the cable says it needs 12v DC, and the power supply gives 650 watts. I don't understand any of this, can someone please explain this to me, and if this power supply doesn't work, please give me examples of ones that will work. Longest answer will get best answer.Thanks!
- That Xbox power supply cable is pretty cool! I've never seen those before. Ok, as for the power supply questions: Peak power is the maximum amount of power the unit can supply for a short period of time (a few seconds at most). A computer, during start-up, will use quite a bit more power than once it has achieved steady state. This is because drives have to spin up, semiconductors have to power up, etc. Once everything is up and running, the power draw drops to nominal or steady-state Sustained power is the amount of power the unit can supply non-stop. When purchasing a power supply, always give yourself leeway. If a supply indicates it is 650 watts sustained and 80% efficient (gotta look at that efficiency!) then it can supply 520 watts of power continuously. Even at that, I wouldn't want to run it past 450 - 475 watts continuously. 12v DC is the high rail on a power supply. Different parts of the computer require different voltages to operate. Drive motors typically need the 12v DC, where as memory needs less than 3 volts. A computer power supply has different rails or supply wires which supply the following voltages: +12 volts DC, +5 volts DC, and +3 volts DC (there are some others but those are the key ones). I don't know what the power requirements are for an Xbox 360, but it obviously needs the 12 volt and 5 volt DC rails to power it. Anyway, the power supply you've listed above is more than adequate.
- Q:If i bought a graphics card with a power cord, cable, plug thingy, will it matter how much power my desktop can produce? Because i know some graphics card use quite abit of power and my desktop is old and does very little power.. So yeah.
- yes if the graphics card needs more power than that it already gets from a motherboard, you will most likely need a power supply that
- Q:The power cable to my mom's laptop keeps making a buzzing sound that I've never heard it make. I've asked my dad, but he said it was normal. I was relieved until the cable made that noise after I unplugged it. What can it be? It is the power cable itself not the laptop.
- The buzzing noise is not that of a Laptop its rather that of the Power adapter of the Laptop so there is nothing to worry about it you laptop is as good as it can be. But i would suggest not to use that adapter for a longer time because it may cause trouble in voltage fluctuations .
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Single Core and multi-core PVC Insulated and PVC Sheath Cable 450 /750 V NYM
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 3000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
