Fire Pump Cast Steel Electric High Pressure Pump
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Company Introduction
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product specification
XBD-DL Multi-stage fire pump is vertical, single suction, multistage centrifugal pump, used to deliver non-particles clean water and fluids similar with water in physiochemical property.
It is mainly used for pressuring water supply in fire system, also it can be used for water drainage in factory and mines.
XBD-DL Vertical Multi-stage single-suction multi-sectional centrifugal Fire Pump | |
Flow range | 5~80L/S |
Pressure range | 0.2~2.25Mpa |
Motor power Range | 1.5~200KW |
Inlet/outlet caliber | DN50~DN200mm |
Structure | Vertical Multistage Centrifugal Pump |
Usage | Fire Water Pump |
Power Driven | Electric Motor |
Pressure | High/Low Pressure |
Application | Fire systems of high building (office, Hotel, hospital etc.), Mining Area and other Industrial Fields. |
Packing | Wooden Carton with steel belt. |
Brand Logo | Kaiyuan Fire Pumps |
Features
1. Hydraulic design with wide flow-path non-clogged structure ,allowed fibres(3 times
length of inlet diameter),particles(30% size of inlet diameter )
2. Excellent design,high efficiency and energy saving .
3. Double mechnical seals in series,made of hard alloy corrosive proof silicon
carbide,which is durable and .wearable ,that enable pump safely operation for more
than 8000 hours continous.
4. Compact structure, small volume, easy moved and conveniently mounted , no need build
pump house, greatly reduct the cost.
Pictures show
Transportation
- Q: How to install circulating water pump for cooling tower?
- Water pump, cold water pump and hot water pump, the specific installation depends on the location of the cooling tower and the location of the heat exchanger, high cooling tower position, the need for hot water pump, heat exchanger position high.The cooling tower, cooling tower (Cooling tower), is using water as coolant, from a system to absorb heat emissions to the atmosphere, heat exchanged to produce steam, steam heat to volatile evaporation dissipation, convection and radiation heat transfer principle to disperse industrial waste heat or refrigeration and air conditioning to reduce evaporation cooling device therefore, in order to ensure the normal operation of the system, device as a barrel. The cooling tower can be divided into natural ventilation cooling tower and mechanical ventilation cooling tower according to its ventilation mode.
- Q: We have just replced our hot water heater in our camper. When we turn on the water pump we hear it kick on and run. When we turn on a faucet water comes out then slowly goes away untill nothing comes out at all. It has been a year since we used the water tank, so its been full of air. The camper is pretty old, i dont know the specific date though. Could it be low water pressur? any help would be greatly appreciated.
- Check to see if the water pump has a filter on it. Could look like window screen or similar. Junk in that will fill up with pressure and cut the water off. If the pump stops running after a few seconds of flowing, its probably a filter. Once they get to a certain pressure, water valve opened or closed, they shut off to keep from burning up. If the water tank was left with some water in it, moss may have grown. Should flush it with some clorox and water. Check with a local dealer to see how much.
- Q: can't get the pulleys to line up I know I have a mid 70's 400 and the water pump is later than 1969 but I can't find a pulley that works every one is about a half inch off I bought a aftermarket set of underdrive pulley's from march performance and still the same problem the water pump is a half inch off there was no long or short water pump right they are all the same lenght right??? The only difference I know of is that pre 1968 the pumps have a 8 bolt design and after they have a 11 bolt design is that right???
- did you happen to loose the aluminum spacer between the water pump output shaft, and the fan pulley?
- Q: I think my water pump has crapped out on my 1997 Jeep Cherokee. I have been leaking coolant for a few days now and there is a puddle under my Jeep after I turn it off and my reserve tank keeps emptying out on me. I replaced the lower radiator hose and still the same problem. It is not over heating so I am wondering if it IS a water pump problem? If it is, could I do the work myself?
- Special tools? What? They are real easy to do. You need only a 1/2 wrench, 5/8 socket, 9/16 socket, 8mm and 15mm. Remove belt (15mm to loosen tensioner pulley, then to loosen adjuster). Remove electric cooling fan (2 8mm bolts at top). Use 1/2 wrench to remove 4 nuts on viscous fan and remove fan. Remove water pump pulley (4 1/2 bolts). Remove hoses from water pump. Remove 2 5/8 bolts that secure water pump to P/S bracket. Remove 4 remaining 9/16 bolts holding water pump to block. Remove water pump. Installation is reverse. No special tools required. I've done hundreds of them and can do one in about 1.5 hours.
- Q: my water pump is leaking and chirping would like to know the procedure
- Drain the coolant. Remove fan clutch. Remove radiator shroud. Remove serpentine belt. Disconnect top and bottom radiator hoses. Disconnect bypass and heater hose. Remove the pump bolts. Remove the pump. Clean all old gasket material off block. Reverse to install! Be sure to use anaerobic sealer on the bolts that enter into the water passages. It's a good idea to replace the thermostat at this time, and flush the radiator and block, as well as use new coolant.
- Q: How do I change the water pump in my 1998 ford mustang manual v6?
- If you don't already know how to do it, then take it to a shop to have it done by the professionals. If you insist on trying it yourself, buy a Chilton's manual for your car, do some online research (with pictures), and buckle down. You will need to loosen the belts, remove the belts, remove the water pump, replace it, and reinstall everything. You will need to make sure that the belt is routed the correct way, or BOOM! You might also want to replace the timing belt while you're in there. It makes sense to replace it if you already are removing it, and the timing belt is something you can't afford to have go bad on you.
- Q: I have two water well good water but not a lot of water .is it possible to hook two pumps up to one holding tank . if so how do I hook them up
- it is very easy to do just email me. I'll send direction . I would say you have a small under ground stream of water . as you use the water from the well, it will take time to fill the well pipe again
- Q: I've bleed the lines, and gotten rid of all the air bubbles. I've replaced the thermostat correctly, (triple checked) and I don't think it's the water pump because it isn't leaking what so ever. My temperature gauge is not moving what so ever, and the coolant reservoir over flows heavily, and I can hear a thumping sound in the radiator.
- Its gonna' take some doin' === Drain the radiator..remove the thermostat..fill the radiator with water and radiator flush chemical..run the motor..until hot..either with the Radiator Cap--ON or OFF.. If you left the radiator cap installed..the engine will need to cool down--to remove it.. Flushing your motor with the radiator cap removed offers time savings.. === Yet..the radiator might over-flow during the flushing. cedure.. === Stand away from the car..and be ready to turn off the motor.. ..safely drain all the flushed material..refill with fresh water and drain out(no need to start thre motor).. === Now..look at your thermostat..does it have a tiny little hole in the flange area.. The flange is the flat portion that supports the opening and allows a place to seal the gasket--there should be a tiny bleeder hole..that's not in the gasket portion.. It allows some coolant to flow--freely.. I once bought a thermostat that was missing the bleeder hole.. I used a tiny drill to replace that item..tiny hole like THIN Spagetti/..so fluid can escape thru thre system.. === With that in mind--get the system back together..check for leaks..//[end]
- Q: Any ideas on where and what type of water pump I should use for my 29 Gallon BioCube tank? It seems that the water pump is very loud and is not working the way it should. There are bubbles shooting the aquarium and I have tried everything to fix it. I am thinking of replacing the water pump all together. Any ideas on brands that would be compatible? Anyone else tried this? Please help...
- ok before replacing have you cleaned the inside, and if there are air bubbles comming out it is because it is running dry. Basically all biocubes do this, the filter pad is slowing down the water too much, so either rince it well or replace it. Also i would wash out the blue sponge right before the pump as that can hold alot of dirt as well. Then if not add more water. But if you want to replace the pump, try via aqua water pumps. they tend to be the best. owner of the BC 29 and BC 14
- Q: I have a fairly new jetted tub. I stupidly used bubble bath 2 days before and have since read that it is not good, but just because of the amount of bubbles, not that it will actually harm the system. The electrical circuit is not tripped. I hear this clicking but the pump doesn't turn on. Any ideas? Do I need a new pump?
- Also may want to check inside the access door underneath some have a cord plugged into a GFI receptacle that may be tripped. May want to check it just in case.
Send your message to us
Fire Pump Cast Steel Electric High Pressure Pump
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
