24V DC Solar Submersible Water Pump for Garden
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Horizontal Centrifugal Double Suction Water Pump
1.Structure of Horizontal Centrifugal Double Suction Water Pump Description
Horizontal Centrifugal Double Suction Water Pumpis used for transporting pure water (particles density shall be max.1%by volumeand granular size shall be max 0.1mm in dimeter) of the liquids with physical and chemical properties similar to pure water. Type MD pump is applied with wear resist material, especially suitable for mineral drainage. The particles density shall be max. 1.5% (Max. of the granular diameter is 0.5 mm).The liquid temperature ofD, MD pumps shall be lower than 80°C.
2.Main Features of the Horizontal Centrifugal Double Suction Water Pump
• Compact structure, good appearance, low construction
•Operation stably, same inlet and outlet
•Convenient installation and maintenance
•Customized design is available, OEM and ODM are welcomed.
•Horizontally and vertically installation as different pipeline system
3.Horizontal Centrifugal Double Suction Water Pump Specification
Item | Multistage Pump |
Multistage Pump | Horizontal Multistage Pump For Pure Water |
Model | CMD |
Material | Cast iron,Stainless steel |
Mode | Horizontal |
Color | Blue |
Temperature | <=80°c< span=""><> |
Seal | packing seal |
Theory | Centrifugal Pump |
Structure | Multistage Pump |
Usage | Water |
Power | Electric |
Standard or Nonstandard | Standard |
Fuel | Diesel |
Pressure | High Pressure |
Application | Hot and cold pure water |
Outlet Diameter | 40-500mm |
Capacity | 6-1250 m3/h |
Head | 75-1800m |
Rotation Speed | 1450-2950r/min |
Power | 5.5-2400kW |
Certificate | ISO9001 |
Feature | High efficiency,Easy maintenance |
4.FAQ
① What is your product range?
Centrifugal pump, slurry pump, gravel pump, clean water pump, sewage pump, chemical pump, single stage
pump, double suction pump, industry pump, oil pump, paper pulp pump, mud pump, self-priming pump, pipe
water pump, boiler water pump, etc.
② Are you a manufacturer?
Yes, we have been in manufacturing and marketing industry centrifugal pump over 20 years.
③ What information should I let you know if I want to get a quotation?
Pump capacity, pump head, medium, medium temperature, pump material, quantity, if possible, please also
provide the pump model you are using now, price will be calculated as per the pump model, if not, we willrecommend relevant product for reference.
- Q: belt removal mercury cruiser water pump?
- The pump bracket pivots that allows the belt to be removed. I've seen a few where the alternator belt is over the top of the water pump belt, so you have to remove it first. Actually a pretty easy job.
- Q: I bought a new water pump for my 89 S10 Blazer with the 4.3 V6. The guy at Autozone wanted to know if I wanted a standard one or the heavy duty. I bought the heavy duty one because it was only $5.00 more. Are they just built stronger or do they actually move more water?
- The intense flow in simple terms strikes greater water in line with revolution the a manufacturing facility pump. Heavy accountability must be the comparable because of the fact the hi-flow, whilst the electrical powered pump would not use the fan belt to coach the pump, this is have been given a small electric powered motor to try this. See if there is any distinction between hi-flow heavy accountability, get one in all those.
- Q: I have replaced the presure switch on my water pump but it switches on and off when it is building up presure instead on staying on until it gets to right presure.Any ideas of what is causing this?
- This can get sticky, so pay attention and keep up. Every well system has to have a pump and a resevoir tank. The older style tanks used the air that gets trapped in the top of the tank and compressed, to push the water back out when you opened a tap. However, over time water and air will mix together a little at a time until there's very little or no air left at the top to compress, and we all know that you can't compress water, so when that happens, the pump starts up, the pressure switch realizes that the pressure is instantly at the shutoff point and shuts back down, sometimes over and over in an almost self perpetuating cycle, until you shut the power off. With the advent of the new bladder tanks, where the rubber bladder installed in the center of the tank keeps the air on top at a certain pressure and the water coming in the bottom away from mixing with the air, these problems pretty much go away, until the bladder breaks and allows water to flow up into the top area. Then you have a very expensive old style resevoir tank, with the same old waterlogged problems. If you have either of these types of systems then you can remedy the situation for a short time at least, by completely draining the tank with the pump off and then shut all the valves above and refill the tank, allowing the water to pressurize the air. If you have the bladder tank and it's acting that way, then you may want to replace it, or just use it as is. You can always pressurize it from the top and drain it by putting enough air in it to blow all the water out and then start over.
- Q: i learned from wikipedia that the water pumps back to reactor where it is heated again and the cycle begins again. but then i saw this diagram
- I can see why you're a little confused. There are actually 3 separate loops in most reactor designs and you can see this in the diagram. The primary heat transport loop contains the water that touches and cools the fuel and this is the water that is pumped back to the reactor where it is heated again.... It is shown in the diagram in pink. The water from the primary heat transport loop passes into a steam generator which is full of water but the water in these two systems is kept separate to ensure all radioactivity stays in the primary heat transport loop and in the containment building. Basically the pipes from the primary heat transport system pass through a large tank of water and heat the water in the tank causing it to boil. The steam is then passed out of the generator, out of containment, and into the turbine. Next it goes into a heat exchanger which is similar to the steam generator except it is used to cool the water. The cooled water then passes back into containment and into the steam generator to be boiled again. Finally, the third heat transport loop moves cold water from either a lake, ocean, or cooling tower, into the turbine building where it cools the water in the secondary heat transport loop. This water is kept completely separate from the water in the secondary heat transport loop to ensure that if the secondary loop water somehow becomes contaminated, it doesn't pass into the third loop and get into the lake, ocean, or atmosphere. I hope that clears things up :)
- Q: I have a Goulds JPlus water pump inside my home. Last night, my wife and I heard it going on and off repeatedly when we went to bed. I have two shallow wells hooked up to it, so I switched wells even though I didn't believe the one I was on was dry (it was supplying H2O fine).Still no luck, so I turned it off at the breaker and shut off the valve between the tank and pressure switch. Today, the pump pressure gets to between 50 and 60, then goes off. It then loses pressure v ery quickly (approx 10-20 seconds) and goes back on when the pump switch hits the lower threshold. It sounds like the water is running back through the pump and out of the house when it goes off unless I turn the shut off valve I spoke of earlier. I changed the pressure switch and no difference.I can, however, turn it on and shower, flush, etc. I just then have to go down and turn the pump back off.Any help would be greatly appreciated!
- If there is space try to hit the head of the bolt with a hammer, the shock from the hammer blow will help you to loosen the bolt. Failing that the next thing to try is an allen key socket, with this you can use a long strong arm to apply extra torque to the bolt. Be carefully not to open up the head of the bolt as this can be a major pain. If you still cannot get it out then if the water pump is to be replaced try to get an angle grinder on the bolt to cut its head off. Once the head is off and the pump is out you can use a stud extractor of a good vice grip to remove the stub of bolt left over.
- Q: When using a frequency converter to adjust the pump, what is the relationship between the change of the speed and the efficiency of the pump?
- First, the wind pumps such load is usually called square torque load, which is in a certain range of speed and torque is roughly proportional to the square of the speed of N, TL=kn^2, power and speed is proportional to the cube, the energy-saving effect is obvious. Can also be described according to what you pump model, the pump is divided into piston pumps, screw pumps, impeller pumps and centrifugal pumps.Secondly, under the standard condition, the higher the efficiency of the centrifugal pump, the higher the speed determines the size of the centrifugal force, the higher the speed, the greater the centrifugal force, and vice versa. Plunger pump and screw pump is not the same, the speed of speed and efficiency basically no impact. Third, in addition to buying the pump, you can let the manufacturer give you an FM curve, so you can see the frequency of mediation when the water pump efficiency changes
- Q: I have a 1995 Jeep Grand Cherokee 6 cyl while driving home the other day my check engine light came on ,then I noticed my battery was loosing its' charge ,then I noticed my temperature gauge rising very fast.I stoped to see what the problem was.The vehicle had over heated and the serpentine belt was partially off Iet it cool down then I put water in it and drove it home which was about a quarter of a mile.I noticed no problems with the fan hitting the water pump pully until I put the belt back on .My water pump pulley appears to be off line how do I fix this?
- your water pump bearing is probably worn out, unfortunately if this is the case replacing the water pump is the only option take the belt off again grab the fan if you can wiggle it forward and back its no good if its ok go to the belt tensioner, Its the next most likely culprit if it get out of line it will throw the whole thing out of whack good luck
- Q: Was able to remove all bolts except the one in the rear of engine one of the bigger bolts the pulley from the serpentine belt blocks itdoes the pulley need to be removed and if yes then how
- I would suggest removing the pulley but I dont know what kind of car it is.
- Q: I have a cabin cruiser and I recently took it out of storage and had it de winterized. Now everything seems to work except for the fresh water pump for the sink, shower and toilet. Does this type of pump need to be primed? If so how do you prime it? Thank you for the help.
- Those pumps are usually self priming.. either you have a PLUGGED LINE or the water pump froze in the cold and it needs to be replaced... but they are cheap.
- Q: Could my problem be greater than a water pump or thermostat?
- Yes, there could be a hole in radiator, or in hose/s to/from radiator. Have it repaired, ASAP. Experience over the years have taught that 'radiator repair' liquid does not work.
Send your message to us
24V DC Solar Submersible Water Pump for Garden
- Ref Price:
-
- Loading Port:
- Ningbo
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
