SBWG Intelligent Water Distributor Pump System
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 200 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Advantage of SBWG Intelligent Water Distributor Pump System
Higher Efficiency&saving energy
Low noise
Non-leakage
Intelligent Control
Exellent Structure
Invirmental protection idea
General description of SBWG Intelligent Water Distributor Pump System
SBWG Series Intelligent Water Distributor Pumps Package is a Green, using modern fluid simulation technology, design high efficiency and energy saving product hydraulic model, the technical indicators in the industrial leading position, has a several of national patents, with advantages as: high efficiency, performance wide range, running safety &smooth, lower noise, long life, easy installation and maintenance etc.
This serial of package not containing solid particles(abrasive),does not contain the suspended material's water or physical and chemical properties of other liquids similar like water, also can through the change pump flow components material, sealing structure and increase cooling system, etc, used in conveying hot water, oil, corrosive or containing abrasive media.
Technical data of SBWG Intelligent Water Distributor Pump System
Diameter of Discharge Flange: DN40 upto DN150
Capacity:Q:6.0-2000m3/h
Head:H:10 upto 100m
Operating Temperature: less than 40 degree.
Model Explaination of SBWG Intelligent Water Distributor Pump System
SBWG 18-34-2
SBWG Shenbao Brand Intelligent Water Distributor Pump Package
18 —Designed Capacity(m3/h)
34—Designed Head(m)
2-----the package parallel connection 2 pumps
Applications of SBWG Intelligent Water Distributor Pump System
Type SBWG Intelligent Water Distributor Pumps package is a Multifunction product .can be apply for supplying clear water and industrial liquid, different temperature, different capacity and pressure..
Water Distributor for Residence,business-living buiding,home community,high buiding,hotel,multiple buiding,office buiding,hospital,school,...etc
improving previous pressure water supply or elevated water tank
Distributor domestic water and processing water in enterprise
Hot water supply system or water heating system in home community,high buiding....etc
Air condition Water Circlulation & cooling
FAQ of SBWG Intelligent Water Distributor Pump System
1. How can I get trained on CNBM products?
Yes, we provide training courses in our factory (products, general and specific pump technology, hydraulics, and practical applications). Please consult your sales manager or get in touch with our headquarters for more information.
2. Are your pumps cheaper than those of your competitors?
CNBM aims to give its customers the highest standards of quality and service and delivery times, all at a reasonable price.
3. Do you have self-priming pumps?
Yes, our product portfolio also includes two ranges of self-priming pumps: self-priming electric pumps and self-priming side channel pumps.
4. Is it really necessary to fit a bleed valve for the boxes?
It is always best to have a bleed valve as the gas produced by the fermenting sewage is potentially hazardous.
- Q: What does the temperature range of the pump mean?
- Not be too cold or hot water, will be frozen.
- Q: does any one know were a water pump is located on a 97 nissan altima? and where can i get a good deal on one?
- the water pump is in the lower unit....hold on, isn't that a car? sure, us boaters are smarter that your average bear, but you'll probably get more useful information by posting your question in the automotive section.
- Q: Pump suction and pressure side road why should vacuum table and pressure gauge, and what role they have?
- The vacuum meter is used to measure the vacuum degree of the water pump before the water pump pumping, and to a certain degree of vacuum, the water can be sucked into the upward pressure position of the pump.A pressure gauge is used to indicate that the pumping is pressure in the pipe. The size of the pressure is related to the lift head, pipe diameter, atmospheric pressure and so on.
- Q: We usually wait 4 - 5 minutes for hot water in our master bath. I've been looking into ricirculation pump systems. This would have to be a retro-fit system since some of the lines run through concrete slab making adding a return loop on the line non-feasible. I have found some people comment on simply using a by-pass valve system without a pump (ie. Hot Water Lobster). We do have hard water which I've also read that can present a problem with pumps dieing quite quickly. While I'd like it, I don't need 1 second hot water, but I can't stand wasting gallons waiting for 4-5 minutes. A reasonable 15-30 second wait would be a huge improvement. Has anyone had reasonable success with the bypass valve without the pump or should I plan on getting the pump too? Thanks in advance!
- If the water isn't moving, it is not going to change the situation. This is what you would have with a by-pass valve. You need the return loop. Is it possible to run it through the attic? Some companies are making a switch that is pushed when hot water is needed so the pump is not running continuously.
- Q: I need to fit a booster pump to increase pressure from a gravity fed vented solar water heater (uses vacuum tubes).The problem is that the temperature of the water from the solar panel can be very high - in fact it could boil under some circumstances. It's safe because the system is vented.As the quot;solarwater feeds existing water heaters in the house, diluting the hot with some cold prior to the pump with an automatic mixer valve is not really an attractive option as we want to gather as much hot water as possible.Can anyone tell me where to get a booster pump that can operate at up to 100 Deg C, delivering 2 bar pressure and about 25 liters per minute. Thanks.
- Yes you can as per the other answer . Make sure when you do you dont exceed the Gallons per minute of the cellar pump or you will burn up the pump on your house . Also make sure that the pump in your moms house can only pump up to 50 psi . Most well pumps can pump higher but that is the setting on the presure switch You might be able to change the tank and switch in moms cellar to a bigger presure tank and up the presure on the presure switch and cure the problem that way and not work the well pump so hard by turning off and on so often .
- Q: i have a 97 mercury mountaineer and i recently got the thermostat changed in it. after doing so we noticed that the car was leaking antifreeze. we checked to make sure everything was tight and there was no cracks and my uncle said he thinks its the water pump how can i tell
- look at the water pump. do you see coolant? if everything is covered in coolant, clean it off with brake clean, then run it and look around the water pump again. It probably is the thermostat housing though. seeing as how they took that off recently. so look there too.
- Q: My water pump keeps getting quite hot after each use. Everything seems to be working properly, except I think that the heat may cause it to burn out and that would cause a huge problem. My pump pulls water from a ground level water tank and pushes water up three flats to the part of my house used for living quarters. The pressure setting is set to cut out at 40psi and cut in at 25psi. What can I do myself before calling in expensive experts?
- You have an air volume problem and the tank is water logged. When this happens the pump motor short cycles and creates more heat than it can dissipate. A device inside the motor windings cuts the power until it cools again. You can cut the power off,drain the tank, then start all over, it will give you1/3 air pressure volume over 2/3 water. They have an air volume control that may not be operating properly. I use an air compressor on my pump and pump air into the tank about once every two months. It all depends on how much the pump runs.
- Q: need step by step on how to change water pump
- The water pump is ran by a belt on the back of the cylinder head There is a belt tensioner that is released by a 3 /8 ratchet . Once you get the belt off take off the pulley and next you will have to have a special tool that inserts into the water pump socket and turn it counter clockwise to release the pump .When you put it back together make sure you put a little grease on the O-ring so you don't damage it . They are fairly simple if you have the tool they should have one at any good parts store . Good luck .
- Q: implementation of regulator in water level control system
- I call the guy who installed it if he reputable he abound fix it if hes a jack. Then call a real plumber.
- Q: My '95 Ford Ranger has had the sound of a bearing going bad in a pulley for about two months. Finally this weekend I started it up and it must have locked up, the belt was squealing really loud and snapped. So, now the water pump pulley has rubber chunks on it, which would make me think that is the bad pulley. But the pulley spins perfectly, really smooth. The alternator pulley on the other hand does not spin perfectly. It is not really hard to spin, but it does not spin smoothly. And the alternator pulley is real clean, no rubber on it at all. Any thoughts? I was thinking of buying a cheap belt and putting it on there, have someone start the truck and watch under the hood to see which is bad.
- Well from your description I would say it's the water pump, as that is where the residue is but if all the pullies are spinning by hand I would suggest gtting a throwaway belt and looking for yourself. Also if you had any overheating problems before than I would lean to the water pump, or if you had any dead batteries or charging problems I would lean to the alternator then. What about the A/C compressor that could also be the problem, so could a tensioner as well. So I stick with my original statement and try to get a cheap belt and look for yourself, just make sure you wear protective glasses so if it does snap you dont lose your eyes actually just be careful when you do it OK!!! Good Luck, Tony
Send your message to us
SBWG Intelligent Water Distributor Pump System
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 200 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
