DN80 Wafer Type Butterfly Valve BS Standard
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General valve using the market long-term, widespread Water Leakage, rust phenomenon, soft sealing gate valve produced by the introduction of foreign advanced technology of the enterprise. To overcome the poor sealing gate valve, general elastic fatigue, rust and other defects. Soft sealing gate valve is a traditional valve replacement products, the compensation effect of using flexible gate produce small deformation, achieve good sealing effect, the valve has a light switch, reliable sealing, good elastic memory and long service life and other significant advantages, can be widely used in water, sewage, construction, food, medicine, metallurgy, electric power, textile, energy systems, fluid pipeline regulation and closure devices as.
The characteristics of:
- flat style seat
The traditional control valve often pass after washing due to foreign objects such as stone, wood, cement, paper, and other debris deposited on the valve at the end of the groove. Close but not close easily lead to the formation of Water Leakage phenomenon, the lower part of the soft sealing gate valve with water using the same flat design, easy to siltation caused by debris, the fluid unimpeded.
And the overall package glue
The valve plate is made of high-quality rubber overall, the outsourcing of plastic, making the domestic first-class rubber vulcanization vulcanization after the valve plate to ensure accurate geometry, and the rubber and ductile iron gate is connected firmly, not easy to fall off and good elastic memory.
And corrosion resistance
The valve body adopts epoxy coating powder, can prevent the corrosion and rust, and can be used for sewage systems.
And not easy to break
Traditional cast iron garden gate often hit foreign objects, collision or overlap caused by the fracture phenomenon. Because the valve to switch to ductile iron, this is the case already significantly reduced.
Three "O" ring seal
As the valve stem with three "0" ring ring seal design, can reduce friction when the switch is greatly reduced, Water Leakage phenomenon and can cut off the water supply construction not replace sealing ring.
And help to drink
Due to the internal body to non-toxic epoxy resin coating, gate of the inner and outer surfaces are completely coated with rubber and can not rust or corrosion of water available to drink.
- Casting valve
Valve body casting, precise geometry makes the body without any internal finishing to ensure that the valve seal.
And light weight
The valve is made of ductile cast, lighter in weight than conventional gate weight about 20%-30%. Convenient installation and repair.
Overview:
General valve using the market long-term, widespread Water Leakage, rust phenomenon, soft sealing gate valve produced by the introduction of foreign advanced technology of the enterprise. To overcome the poor sealing gate valve, general elastic fatigue, rust and other defects. Soft sealing gate valve is a traditional valve replacement products, the compensation effect of using flexible gate produce small deformation, achieve good sealing effect, the valve has a light switch, reliable sealing, good elastic memory and long service life and other significant advantages, can be widely used in water, sewage, construction, food, medicine, metallurgy, electric power, textile, energy systems, fluid pipeline regulation and closure devices as.
The characteristics of:
- flat style seat
The traditional control valve often pass after washing due to foreign objects such as stone, wood, cement, paper, and other debris deposited on the valve at the end of the groove. Close but not close easily lead to the formation of Water Leakage phenomenon, the lower part of the soft sealing gate valve with water using the same flat design, easy to siltation caused by debris, the fluid unimpeded.
And the overall package glue
The valve plate is made of high-quality rubber overall, the outsourcing of plastic, making the domestic first-class rubber vulcanization vulcanization after the valve plate to ensure accurate geometry, and the rubber and ductile iron gate is connected firmly, not easy to fall off and good elastic memory.
And corrosion resistance
The valve body adopts epoxy coating powder, can prevent the corrosion and rust, and can be used for sewage systems.
And not easy to break
Traditional cast iron garden gate often hit foreign objects, collision or overlap caused by the fracture phenomenon. Because the valve to switch to ductile iron, this is the case already significantly reduced.
Three "O" ring seal
As the valve stem with three "0" ring ring seal design, can reduce friction when the switch is greatly reduced, Water Leakage phenomenon and can cut off the water supply construction not replace sealing ring.
And help to drink
Due to the internal body to non-toxic epoxy resin coating, gate of the inner and outer surfaces are completely coated with rubber and can not rust or corrosion of water available to drink.
- Casting valve
Valve body casting, precise geometry makes the body without any internal finishing to ensure that the valve seal.
And light weight
The valve is made of ductile cast, lighter in weight than conventional gate weight about 20%-30%. Convenient installation and repair.
- Q: my dad is going to go under heart valve replacement what are the chances of him surviving he is 58 years old and has copd
- It depends a lot on which valve and why it's being replaced, but unless the COPD is very bad, the average chance that a 58yo man who does not have any other major medical problems will survive single-valve replacement surgery is better than 98% if the surgery is done by an experienced surgeon at a good hospital. The COPD will very likely mean that his post-operative recovery will be prolonged and difficult, but he should do fine.
- Q: I think I have a bad valve steam seals because when I start the car white-grayish smoke comes out of the back of the car. When let sit for 2 or more hours start car and smoke comes out everytime. Will a valve adjusment fix the problem? Thanks
- I agree with MC. If you have a leaking valve seal, it'll just be a matter of time before the other ones start leaking, if it's a high mileage engine. You might as well pull the head(s) and have all seals replaced. The kit you but has all the seals in it, not just one. You can check the valves also while the heads are off.
- Q: freak accident broke the shutoff valve at my toilet, so first thing i did was shut the water off at the main shut off valve inside the house. then fixed the toilet shut off valve then went to turn the water back on at the house valve and it ran for a few seconds and that was it. so i then went to the main valve at the street to make sure it was open. it was open as well as all the others inside the house. still no running water. please help.
- something might have went up into valve assy inside toilet. try to check on that, if that doesn't help, then replace the assy with a Fluidmaster 400a kit.
- Q: I have tried to adjust valves of Suzuki Intruder VS400 but they still tapping..so how to adjust them in the right way?
- after someone says take it to the shop, you can get the real service manual offline and do it. you need good feeler gages and a good feel for it. does your require shims or are the rockers adjustable?
- Q: Ok. I have to ask cause I have been in hospital all weekend after having a moment on saturday when my heart decided to start racing. Woke up 4.30am on saturday morning cause of blood test which kinda showed I could have had a heart attack which was scarey and though I was discharged today I got told I had a leaking aortic valve. What does this mean and what is going to happen. I am honestly really worried cause it cant be good
- The valves of your heart valve are not closing properly. Very common thing. May or may not require surgery. May or may not be related to you having a fast heart beat. Ask your dr to tell you what the racing heart was about. They would have a record if it was significant. Or your doctor may want you to wear a monitor for 1-2 days to help to catch this so it can be identified.
- Q: I have a lawn tractor with a 10 hp Tecumseh and its running so rich because of the carburetor float valve not seating. So how should I fix this?
- A disfunctional float valve will cause the carburetor to flood from fuel spilling over the top of the float bowl. The float valve acts like a toilet valve and just fills the float bowl up to the top and closes until the level drops from the fuel evaporation being pulled off while running. I don't know the exact specs, but you should be able to guesstimate and adjust by bending the float tang, or just replace the float valve.
- Q: I took my 2nd valve out to wash it (i couldn't find my oil, but it worked fine) and I've tried making the number face the mouthpiece, yet it still is messed up and won't let me play a lot of notes.
- 1) Try this first and if this doesn't work, go to #2. Oil the valve's body and gently put it back into the cylinder without screwing it in yet. Then, turn the valve until it clicks, and make sure it is really seated correct. Some trumpets have two clicks, and one is not the right one. So, you have to get the right click - which tells you that your valve is seated right. When your valve is seated right, then screw it in. 2) If you don't get a click when you spin your valve - look at the tubing on your trumpet and line up the holes in your valve with the tubing. When the valve is up, it will line up with 2 holes of the tubing, and when it is down it will line up with 2 other holes in the tuning. So, you can determine the correct positioning of the valve by looking at the tubing on your trumpet. But this is a last resort. I've never seen a trumpet where the valves don't click when you turn them.
- Q: I have a D16Z6 SOHC VTEC engine in my 93 Honda Del Sol.Ive been told that the D16Z6 came with 2 different valve covers. One style cover says Honda on the top and another also says VTEC.I have the one that just says honda but I want the other put on.What would I need to swap them, and where would I get them?and a roundabout price
- there okorder
- Q: What do I do to make my valves stop ticking? And what makes them tick? its a 94 Acura Integra with a 91 LS motor, 105,000 miles. If I get a new engine head will it stop ticking or the ticking has to do with the block?
- Get your valves adjusted. The B18B engine has solid valves- like every non-VTEC Honda engine. The service interval is actually every 30,000 miles, but usually the technician just checks them at 30,000 miles. If they need adjusting, the tech will adjust them, but usually they don't. Yours are right on schedule. Go get the valves adjusted now. It's just normal wear and tear. When you hear the ticking, just get them adjusted. Those are extremely reliable engines and 105,000 miles is like you just broke it in.
- Q: My furnace cut out about a year ago. The hvac guy i used told me the gas valve was no good and that the flu was partially blocked. I cleaned out the flu, he replaced the gas valve ($700+) and it worked great for a year. Today the furnace does not fire up. Pilot is working. I cleaned out the flu (there was definitely quite a bit of debris, so that was probably the cause for the shut off) .... The flu is now clear, but when i turn the system back on the thermostat calls for heat, but there is no gas flow to the burner... could the valve have failed that quick, or should i be looking at something else like the CO sensor or something... just looking for some direction before shelling out another 700 bucks... Thanks in advance for any ideas or assistance....
- I was wondering why the flue is clogged? I've never had to clean mine. Well anyway, I use a shop vac to vacuum out any dust or rust that accumulates on the gas valve on the rare occasions it failed to work,and that fixed it every time.
Send your message to us
DN80 Wafer Type Butterfly Valve BS Standard
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 5000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords