Copper Conductor XLPE Insulated Fixed-installed Fire-retardant Power Cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Introduction:
The product applies for A.C supply & distribution system and is manufactured according to State Coal industry standard MT818.13-1999.Long-term service temperature of the cable conductor should not exceed 90℃.Max. temperature of conductor during cutting-out shall not exceed 250℃(max. duration 5S)..
Operating Characteristics:
ØRated Voltage：1.8/3~3.6/6kV
ØMin. Ambient Temperature: -40℃
ØNormal Operating Temperature：90~250℃
ØMin. bending radius is no less than 30 times of cable thickness
Specification:
Type and Description:
| Description |
MYJV | XLPE insulated ,PVC sheathed power cable for coal mine |
MYJV22 | XLPE insulated , steel tape armored , PVC sheathed power cable for coal mine |
MYJV32 | XLPE insulated , fine steel wire armored, PVC sheathed power cable for coal mine |
MYJV42 | XLPE insulated , heavy steel wire armored, PVC sheathed power cable for coal mine |
Cable Specifications:
Type | Cores | Rated Voltage kV | |||
0.6/1 | 1.8/3 | 3.6/6 6/6 | 6/10 8.7/10 | ||
Nominal cross-section mm² | |||||
MYJV | 3 | 1.5～300 | 10～300 | 25～300 | 25～300 |
MYJV22 | 3 | 4～300 | 10～300 | 25～300 | 25～300 |
MYJV32 | 3 | 4～300 | 10～300 | 25～300 | 25～300 |
MYJV42 | 3 | 4～300 | 10～300 | 25～300 | 25～300 |
Nominal Thickness of Insulation:
Nominal cross sectional area of conductor | Rated Voltage kV | ||||
0.6/1 | 1.8/3 | 3.6/6 | 6/6 6/10 | 8.7/10 | |
| |||||
1.5 | 0.7 | — | — | — | — |
2.5 | 0.7 | — | — | — | — |
4 | 0.7 | — | — | — | — |
6 | 0.7 | — | — | — | — |
10 | 0.7 | 2.0 | 2.5 | 3.4 | — |
16 | 0.7 | 2.0 | 2.5 | 3.4 | 4.5 |
25 | 0.9 | 2.0 | 2.5 | 3.4 | 4.5 |
35 | 0.9 | 2.0 | 2.5 | 3.4 | 4.5 |
50 | 1.0 | 2.0 | 2.5 | 3.4 | 4.5 |
70 | 1.1 | 2.0 | 2.5 | 3.4 | 4.5 |
95 | 1.1 | 2.0 | 2.5 | 3.4 | 4.5 |
120 | 1.2 | 2.0 | 2.5 | 3.4 | 4.5 |
150 | 1.4 | 2.0 | 2.5 | 3.4 | 4.5 |
185 | 1.6 | 2.0 | 2.5 | 3.4 | 4.5 |
240 | 1.7 | 2.0 | 2.6 | 3.4 | 4.5 |
300 | 1.8 | 2.0 | 2.8 | 3.4 | 4.5 |
- Q: my mac is fairly new, but is not charging. Are mac power cables this bad?..does anybody know if they need to be replaced often?
- Umm well we have had our Mac for about 9 months now and we have had to replace it once. So I think so, just like in iPod touches the headphone jack is screwed up.
- Q: I have just bought a pair of Yamaha HS50m monitors, connected only the power cable, switched them both on, and they are both making a noticeable constant hissing noise?Is this normal? Should this happen?Is it because I have not yet connected them to my interface or any other device?I am worried I have purchased a dodgy pair and would be grateful for any info.many thanks
- You might have a short somewhere.
- Q: I have digital cable through Cox. The receiver is plugged in, and the electricity is fine, but it won't turn on! Please help! I don't want to pay for repairs!
- If your not getting any power to the box no little green lite or humming noise coming from the box then its dead. your just going to need to get the box replaced you should be able to just bring your box in and trade it out to avoid a service call charge.
- Q: The computer is a Hp compaq.So I took the connector out of the computer but left it in the power socket.When I tried to reinsert the connector I hit the metal back panel of the computer and it made contact so I was wondering what is the part(s) that is likely to be broken?I want to know it so I can replace the damaged parts.Thanks in advance of your help.
- The power cable should have enough rubber/plasitc to stop contact with power supply directly unless you seen a spark I would try the a different cable. Is the power supply turned on? If it did spark and is turned on try swapping the power supply. Actually I missread, it touched the case itself so now you have to start swapping all parts starting with the power supply, then motherboard if that doesnt work. I hope you have some spare parks around. you could also take out the power supply and you will see a long 24-pin connector you can short the 1 green wire with a black one to see if the power supply turns on. The connector is a cable comming from the PSU not on the motherboard. And lastly each time you try to start the computer after swapping somthing only have the essentials to have it start. No CD drive extra HDD etc.
- Q: Recently I bought a EVGA Geforce 8800 GTS. When it came in, the card fits in my case but has 2 cables to plug in. I only have 1 cable to plug them in connected to my power supply. Should i only plug in 1, or is it nessesary? Is there an extra one I just dont know about? Please answer!
- You need to get a power cable splitter that goes from two to one. It should have come with the card, if not any local computer store should have one.
- Q: I need 300 ft. of service entrance cable and I've been told I need 4 guage 3 wire 200 amp aluminum is what I need but I'm wondering if this 1 guage overhead line would work just as well if buried in 2electrical pvc conduit for 300 ft.
- as long as it is water tight and deep enough Im sure it would
- Q: for any SATA 2 HDD, the power connector is longer. compared to the data transfer cable. wht is it so?,-------------- ,------the first set of lines represent the power connector second; the data connection cable.
- at the same time as you're meaning are you waiting to boot off of the IDE stressful stress and get get admission to to the Sata stress, the answer is for particular. really connect the SATA stressful stress, and make positive the BIOS settings are set to boot from the IDE stress.
- Q: I have an old school Soundstream 500s amplifier(500 Watts) and I want to put it in my 1965 Mustang Coupe. I want to have a small but clean sounding system for the old car, probably with two small subwoofers too. I need to get all new cables for this sound system, so what would be a good power cable for the amp? I need roughly about 25-30 ft. of cable just to be safe and a fuse as well.
- Kicker,Tsunami,Memphis, or KnuConceptz. U can get away with 8awg but thats a nice car and u dont want to risk fryin anything so stick with 4awg I really dont recommend 8awg in ANY setup just dont like it, 4awg is perfect and gives u headroom as well, and 0awg wuld be overkill.
- Q: Like from a computer monitor?or a pc power cable?would a generic power cable work for it or would it like, blow the brick up lol?
- I asked an electrical engineer friend this same question, and I'm using my original launch 3 prong cable with a new official 203w xbox power brick with 2 prong input and he said it's totally fine. I've been using it for about a week.
- Q: remove just this cable or use different hd and it works fine, is the hd broken or is it a power consumption by the hd issue? tryed a different psu and its the same problem, unfortunately not got another pc handy to check the hd on. Thanks In advance?
- change the hdd interface bus u may get solution otherwise replace it. .in
Send your message to us
Copper Conductor XLPE Insulated Fixed-installed Fire-retardant Power Cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
