CONDUCTOR XLPE INSULATED PVC SHEATHED POWER CABLE RATED VOLTAGE UP TO 35KV
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
XLPE INSULATED POWER CABLE
COPPER(ALUMINMU)CONDUCTOR XLPE INSULATED PVC SHEATHED POWER CABLE RATED VOLTAGE UP TO 35KV
Cross-linked polyethylene insulated power cable do not only has excellent electric, mechanical proper-ties,but also has powerful resistance against chemical corrosion,heat resistance and environmental stress resistance. Its structure is simple,the long period operating temperature is +90°C. It is convenient to use and can be laid with no restriction of different level.
1.standards
The Products are mainly complying with IEC 60502 standard, also can be produced according to OEM requirements and others standars, Such as BS Standard, DIN standard, ASTM standard, ETC.
2. voltage
Voltage grade is up to 35KV,
3. construction
copper or aluminum conductor
copper tape sheild
XLPE insulated
steel wire or steel tape or copper tape armoured
PVC sheath
Specification:
TYPE | VOLTAGE | ||||
No.of cores | 0.6/1kV | 6/6kV, 6/10kV | 8.7/15kV, 12/20kV, 18/30kV | 19/33kV, 26/35kV | |
Mm² | |||||
COPPER/XLPE/PVC | 1 | 1.5~800 | 25~800 | 35~1200 | 50~1200 |
AL/XLPE/PVC | 2.5~1000 | 25~1000 | 35~1200 | 50~1200 | |
COPPER/XLPE/SWA (STA,AWA)/PVC | 10~1000 | 25~1000 | 35~1200 | 50~1200 | |
COPPER/XLPE/PVC | 3 | 1.5~400 | 25~400 | 35~400 | 50~400 |
AL/XLPE/PVC | 2.5~400 | 25~400 | 35~400 | 50~400 | |
AOPPER/XLPE/AWA (STA)/PVC | 4~400 | 25~400 | 35~400 | 50~400 |
- Q: So my vehicle's amp recently stopped working. It worked great after I installed it about a year before, so after testing for shorts, burnt out fuses, etc, I decided that the amp had died on me. After getting a new one-and it not working either-I checked the voltage at the end of the power cable where it hooks onto the amp. I get a 12v reading when the ignition is off, but only a 4v reading when it is in the run or aux. position. The in line fuse is good, as well as the battery (just had it checked). Any ideas as to why this is happening? As of this posting, I have NOT tried running a new power cable yet, but that is the next step if nobody has an answer. Thanks.
- sounds you have a loose ground connection.
- Q: What is the difference between an ordinary power cable for a dedicated cable?
- Inverter special cable General power cable difference shielding requirements higher, the number of cores is generally 3 +. three lines of the ground line of three symmetrical and phase line intersection. Variable-frequency (VFD) is the application of frequency conversion technology and microelectronics technology, by changing the motor operating frequency mode to control the AC motor power control equipment. The inverter is mainly composed of rectifier (AC variable DC), filter, inverter (DC variable AC), brake unit, drive unit, detection unit micro-processing unit and so on. The inverter will adjust the voltage and frequency of the output power by the breaking of the internal IGBT, according to the actual needs of the motor to provide the required power supply voltage, and then achieve the purpose of energy saving, speed control, in addition, the inverter has a lot of protection , Such as overcurrent, overvoltage, overload protection and so on. With the continuous improvement of industrial automation, the inverter has also been a very wide range of applications.
- Q: I know there is problem in the CPU, please suggest what is the problem and how much it is going to cost me?
- Power cable into CPU? I guess you must possibly still have some of those dual power connector Power Supply? Those one where you can connect both the Power to the monitor and the input power to the CPU? If this is the case, your Power supply is possibly dying slowly. You need to change the poer supply. However, if that is not the kind of power supply that you have, I guess what you are pssibly talking about is that your monitor data communication cable which you connect to the CPU so that the data can be transmitted through to your monitor? If this is the case, then your monitor is not having any problem, it is just responding to the fact that it is properrly connected. Put on your system and see if your monitor do come on... If it comes on then everything is fine.... Now finally, if all these is not the case, then it mean you have not put your question properly. Rephrase your question so that you can have an answer... except ofcourse you are just trying to fool around...
- Q: What is resistance of the cable (resistivity of copper is1.7x10^-8)Answer is 14 ohms. But please explain how do we get there in full detail.
- Find total cross sectional area of copper in cable ie 12 * area of one. calculate the resistance of 1 m then multiply by 2000.
- Q: i dont even know what phantom power is. i bought a behringer c-1 mic and ii think i need phantom power.is it a cable. i just wanna connect it to my laptop via usb or audio input jack...plz helpthnanks
- Not okorder /... If you have the C-1U version, all you need to do it connect it directly to the USB port on your computer.
- Q: its like a big power box the has two metal prongs, and is about 2quot;X3big and fits into the same size slot, if you push it in it gets power for a second then doesnt if you jiggle it around it gets power for a second and doenst.anyone know please?
- I take it you are inserting it the right way up, and can only think the plug needs to be bolted in. Look for 2 small bolts, and holes they will fit through. Something that big may need that, as it could shake out otherwise. There may be something that prevents you plugging in when the power is on. If all else fails read the instructions or contact Dell. I could come and help in return for a few favours.
- Q: how many 4pin molex power cable is needed to convert it to the 6pin adapter for ATI radeon hd 2900xt?
- a 6 pin power adapter uses 2 molex (4pin) connectors. However, you can't have them from the same cable (you know how some cables have 2 or 3 connectors on them), or else you won't have enough amps.
- Q: I have recently purchased a SAPPHIRE 100228L Radeon HD 3850 512MB 256-bit GDDR3 AGP 4X/8X HDCP Ready Video Card.
- should have come with a power cable. sometimes these are hidden in a compartment inside the box. take all the inner cardboard out. It would be pretty unusual for one of these cards to ship without the cable.
- Q: I lost these cables in a move so I'm looking to buy a replacement USB cable and the Power Adapter and cord. What cables do I need, and where can I buy them? :(
- The power cable and adapter will probably be unique to the scanner. You'll have to order the right one from HP, or through a computer store. The USB cable should be standard. Most printers and scanners use a USB cable with a Type A connector (flat) on one end, and a Type B connector (squared-off) on the other end. They're easy to find at Staples, as well as at computer stores.
- Q: today i purchased a used audiobahn atb10at 10quot;subwoofer with a built in power and for my car but there was no cables for it, the power is a six prong plug and i was wondering if anyone could tell me what the specific name of this cable is or where i can buy it and maybe how to install it, i tried looking into it and didnt get anywhere thanks
- Yeah, but beware that if your house or wherever you're at loses power while your laptop is on, it will force shut your laptop down and that isn't a good thing. It can damage your laptop, so it is always a good idea to have the battery plug in, Even if the battery only last for 30 minutes. That will give you more than enough time to shut down the laptop the right way.
Send your message to us
CONDUCTOR XLPE INSULATED PVC SHEATHED POWER CABLE RATED VOLTAGE UP TO 35KV
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches