Cast Iron Fire Fighting Truck Water Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Cast Iron Fire Fighting Truck Water Pump
Company Introduce
My company has more than 40 years history, is the China general machinery pump industry association member units.
The company has organized product research and development team, experienced high, intermediate technical staff.Complete production and processing, inspection, testing (pump performance test platform), and other equipment, to ensure that product quality is stable and reliable.Over the department, provincial, municipal and industry product quality supervision and inspection (smoke), only one is qualified to go through.Timely quality perfect after-sales service in place, favored by the majority of new and old customers rely on and praise.
The company has successfully passed the national industrial products production license, ISO9001 quality system review replacement work.Relevant product standards (enterprise), metrology, standardization management system, etc., have been acceptance by the superior department in charge of the inspection.Related to product development, production management, sales and after-sales service, are performed according to the system management standard.
Product Parameters of Cast Iron Fire Fighting Truck Water Pump
| Capacity: | 20-200L/s |
| Head: | 0.3-1.28MPa |
| Speed: | 2900r/min、1450r/min |
| Power of fitted motor: | 0.75-250kW |
| Inler diameter: | 25-300mm(1"-12") |
Application Range of Cast Iron Fire Fighting Truck Water Pump
It is mainly used for the water supply for the fixed firefighting system of both industrial and civil building
fire hydrant fire-extinguishing system,
automatic spraying,
fire-extinguishing system.
Cast Iron Fire Fighting Truck Water Pump Superiority
High efficiency
Reasonable design
Reliable operation
Long in service time
Easy maintenance
Low running cost
Picture Show
Why choose us
1.Exported to 58 Countries
2. More than 90% customers make payment before meeting us!
3. Reorder rate up to 80%
4. Never sell any renewed pumps
5. Focus on middle and high-end market,we never seize market by using inferior material
FAQ
1. How to get our quotation in time, pls answer following questions:
1)What liquid do you transfer?oil ,food or corrosive chemical liquid,with solid particle or not and so on
2) What's the flow or capcity (m3/h, L/m)?
3) What's the discharge head (m, feet, Mpa, bar )
If you do not have any request, we will do as our normal standard.
4) Contact us by under business card information
2.OEM: Ok
3. MOQ: 1set
4. Package: Standard export wooden case(also according to your requirements)
5. Shipping ways: By sea, By air, By express
6. Lead time: 3-15days
7. Warranty Period: One year, except spare parts
Trading market
After-sales service
Transportation
Related products
|
|
Fire Pump Cast Steel High Speed China Made | Cast Steel Centrifugal Pump High Pressure |
| http://www.okorder.com/p/fire-pump-cast-steel-high-speed-china-made_976663.html | http://www.okorder.com/p/cast-steel-centrifugal-pump-high-pressure_975173.html |
- Q:Im changing the water pump on my explorer. As i was unscrewing the bolts one of the heads to the bolt wore out and now its really hard to take out and its giving me a headache. any ideas of what i should do to take it out?
- Drive a smaller size 12 point socket onto it.
- Q:I have a fairly new jetted tub. I stupidly used bubble bath 2 days before and have since read that it is not good, but just because of the amount of bubbles, not that it will actually harm the system. The electrical circuit is not tripped. I hear this clicking but the pump doesn't turn on. Any ideas? Do I need a new pump?
- Your pump either has a jammed impeller or the coupling is broken. These pumps are lubricated by the water flowing through and when you are pumping bubbles, you're not pumping water. Hopefully the tub was installed so there is reasonably easy access to the pump cavity.
- Q:I have a 1998 ford taurus. It started to over heat so i turned on the heater full blast and it didn't get hot. so i put antifreeze in it and i turned it on and it seemed ok but it started to over heat again and the tank for the antifreeze looked like the cap was going to pop off. I was just down the road from my house so i thought if i drove slow i could make it home and it turned on ok but when i put it in drive it stalled. Does this mean its the water pump??????
- sounds like Low water level and a possible head gasket failure from over heating!( low water levels do this) you may? be very lucky and simply have a stuck thermostat or faulty filler cap. ( keeps system pressures correct ) try replacing filler cap as very cheap, also before doing so run engine with full water cooling system with cap off for a minute or two and have somebody rev the engine a few times. we should!! see some water flow across the filler section under filler cap. this will be sign the water pump is working. no flow is possible pump failure. in order of likely hood will be 1) head gasket failure 2) water pump failure 3) filler cap failure.
- Q:What is the reason that the water supply of pump is getting smaller?
- 1, the water pump screen plug, should remove the filter screen sundries.2, the use of lift is too high. Over the pump range, the pump should be adjusted to use height or replace the pump head.3, pump impeller plug or wear, should remove the impeller sundry. Replace the impeller if worn.4, pump outlet pipe blocked by debris, should remove the debris in the pipe outlet.5, diameter and pump does not match, replace the outlet pipe.6, the pump cover gap is too large, increased pump volume loss, should adjust the gap.7, pump body and pump cover leakage, should tighten the pump cover screw, make the pump body and pump cover close coordination.8, the pump speed is low, the use of voltage is too low. Should adjust the voltage to the rated value, replace the thicker cable or avoid peak use.9, water pump diving depth is too shallow, there is air intake, should adjust the diving depth. Pump running depth is not less than 0.5 meters.Yi Mai water pump to help you answer, I hope to help you
- Q:This only happens while I am running water. I can hear the pressure switch clicking on and off the whole time I am doing dishes, laundry, ... Since it is only when the water is running I believe that means it is not a leak. I changed the check valve and that did not fix the problem. I checked the pressure in the tank and it seemed to be around the 20/40 mark. Any other ideas anyone?Thanks.
- It sounds like the bladder in your pressure tank has ruptured.
- Q:I want to run 1 HP, 220 v, single phase water pump on solar panels without using any batteries. what do I need to do so amp; how do I wire it?
- Several huge panels, into an inverter than can provide the required amperage. You realize the pump will only run when the panels are receiving light, don't you? While you may not wish to use batteries, without the batteries the system will only work when and if it gets enough sun to actually provide the required power. It may actually burn out the system or even the motor trying to run on less power than it needs.
- Q:I have just replaced the timing belts on my 94 Civic Si and my 00 Elantra GLS. Both were done at different shops, but i got the same hounding to replace the water pump when doing the belt. My Elantra has 66k and my Civic 85k and i know how important the timing belt is-especially with a negative clearance engine like the VTEC. previously, i've never been told to replace the waterpump with the timing belt til now. is this just a ruse to extort more money out of me, or is there some validity in what the guy behind the counter is saying??
- Not sure about Elantra, but for Honda, the water pump is driven off of timing belt. If you are going to put in 4 hours of labor tearing up to replace timing belt, it would be silly not to replace the water pump because if water pump goes out, then you have to put in that 4 hour labor again. In my experience, water pump life is around 80 - 120K for most cars.
- Q:Hello everyone, is the general household deep well pump capacitor how to pick up ah, 220V voltage, a capacitor, capacitor, there are 2 lines, but the motor is 3 lines, how can I put these 7 lines together?.Please don't copy professional theories from others.
- 220V has two lines (lines 1, lines 2)There are two lines of capacitance (line 3, line 4)There are three lines on the motor (line 5, line 6, line 7)3 11 52 64 7That's plain enough. To change the turn, change any two of the 5, 6, 7, three lines
- Q:me and my friends are contemplating going on a road trip.almost 20 hours of driving.but we dont have a water pump, can you drive without one?
- Not unless you intend to spent about 4 days walking the 19 1/2 hours that will be left of your trip after the engine seizes up.
- Q:Here are specifications for two water pump sets. I would like to know which one will have more vertical suction.Pump 1:1.5 hp, 98cc Engine, 4 - Strokes RPM 3600 (Engine RPM), Petrol Fuel, Fuel Consumption 700 ml/hour, Delivery (horizontal) 50m, Inlet / Outlet Port (Dia) 1.5x1.5 inches, Output Capacity 48000 Litres / Hour.Pump 2:3.3hp, 163 cc Engine, 4 - Strokes RPM 3600 (Engine RPM), Petrol Start amp; Kerosene Run, Fuel Consumption 700 ml/hour, Delivery (horizontal) 26m, Inlet / Outlet Port (Dia) 2x2 inches Output Capacity 36000 Litres / Hour.which one should I go for.
- The first one appears to have a higher flow rating but neither gives a head figure, which is the maximum height it can work to above the pump. Lift from below a pump is limited to 32ft on any form of water pump; that is the limit water will rise to with a total vacuum above it. A normal pump cannot pull a perfect vacuum so working lift will be somewhat less. The practical limit depends on the pump head in use and it's actual head limit; the total height from the pickup point to the delivery point count as working head. Any kind of centrifugal pump or one which cannot also pump air perfectly will need a foot valve at the base of the inlet pipe and a priming system to fill the pipe and pump body with water before the pump is started. If you expect the water level to be more than 10 - 15ft down, you would be better off with a submersible pump; the only limit then is the head rating which can be just about anything. Get a suitably rated petrol or diesel generator as well (3x the pump power rating) if it must operate independently of mains power.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Cast Iron Fire Fighting Truck Water Pump
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
