Weichai Genset Diesel Power Generator Set 20kw1500RPM 50Hz
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1500 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
40kva to 200kva Weichai Power Generator
Specifications:
1, 20kw ~250kw Weichai power generator
Weichai diesel engine is basic on the introduction of foreign(Ricardo Britain) advanced diesel engine technology and developed which is characterized by economical fuel consumption,low noise,powerful,stable operation and reliable performance.
2,Main specification
a,3-Phase, 50Hz@1500RPM, 400/230V (Also Can Be Made According To Customers’ Special Requirements)
b,12V/24V DC start motor and storage battery
c,Brushless, Self-excited, IP21-23, insulation class H alternator
d, 40°C radiator as standard, 50°C is optional
e,Key start panel control system as standard, digital auto-start panel is optional
f,All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (overspeed stop, high water temperature, low oil pressure, battery charging fail, emergency stop)
3,Data of diesel Generator Set
Prime Power | 20kw-250kw | Standby Power | 22kw-275kw |
Rated Speed | 1500rpm | Output Frequency | 50hz/60hz |
Phase | 3 | Rated Voltage | 400v |
Engine Brand | Weichai | Alternator Brand | Stamford |
Fuel Consumption | 4L-200L | Fuel Tank capacity | 8 hours |
Voltage Regulation Rate | ≤±1% | Random Voltage Rate | ≤±1% |
Frequency Regulation Rate | ≤±5% | Random Frequency Variation | ≤±0.5% |
4,Engine Specification
Genset Model | Prime Powe | Standby Power | Engine | Fuel Consumption | Cylinder No. | Displacement | Bore X Stroke | ||
KW | KVA | KW | KVA | (g/kwh) | (L ) | (mm) | |||
GNRW-28 | 20 | 25 | 22 | 28 | K4100D | 236 | 4 | 3.6 | 100*115 |
GNRW-34 | 24 | 30 | 27 | 34 | K4100D | 236 | 4 | 3.6 | 100*115 |
GNRW-41 | 30 | 38 | 33 | 41 | K4100D | 236 | 4 | 3.6 | 100*115 |
GNRW-55 | 40 | 50 | 44 | 55 | K4100ZD | 238 | 4 | 3.6 | 100*115 |
GNRW-69 | 50 | 63 | 55 | 69 | R4105ZD | 238 | 4 | 4.3 | 105*115 |
GNRW-104 | 75 | 94 | 83 | 104 | R6105ZD | 238 | 6 | 6.5 | 105*115 |
GNRW-125 | 90 | 113 | 100 | 125 | R6105ZLD | 238 | 6 | 6.5 | 105*115 |
GNRW-138 | 100 | 125 | 110 | 138 | R6105AZLD | 238 | 6 | 6.7 | 105*115 |
GNRW-165 | 120 | 150 | 132 | 165 | R6105IZLD | 238 | 6 | 6.7 | 105*115 |
GMRW-206 | 150 | 188 | 165 | 206 | 6113AZLD | 238 | 6 | 7.5 | 113*115 |
5,Alternator Specification
Alternator Brand | Stamford,Engga,Mecc-alte,Marathon ... |
Exciter Type | Brushless, Self-excited |
Rated Speed | 1500/1800rpm |
Rated Frequency | 50/60hz |
Phase | three or single |
Rated Voltage | 400V (Available with customer requirements) |
Power | 0.8 |
Voltage Adjust Range | ≥5% |
Protection Grade | IP22 |
Insulation Grade | H |
6,Digital Control Panel
Controller Brand: Smartgen, Deepsea,ComAp
Control Panel: English interface,LED screen and touch buttons.
Main Functions:
1- Display loading power, voltage, currenct, frequency, speed, temperature, oil pressure, running time etc.
2- Warning when low or high voltage, low or high frequency, over current, over or low speed, low or over battery voltage etc.
3- Over load protection, over/under frequency protection, over/under/imbalance voltage protection, and low oil shutdown
7. Accessories
1) Standard accessories: Standard 40 radiator mounted on skid, Common steel frame, circuit breaker, damper, exhaust silencer, flexible pipe, battery and connecting wires, Standard tools kit, operation manual and document.
2) Optional accessories: Engine coolant and oil heater, alternator space heater, cooling for heat exchanger, communication interface, battery charger by main supply, daily fuel tank, ATS and paralleling system, soundproof canopy and moving trailer.
- Q: What is the difference between a general motor and a converter machine?
- It is true that the current trend of motor equipment is adjustable, and most motors can be controlled by frequency conversion
- Q: How do ordinary motors achieve precise positioning
- Ordinary motors can be accurately positioned through a series of circuits. Specific as follows: In action slider side low add a micro switch, micro switch control an intermediate relay, in the middle of the normally closed contact is broken the power of the motor, and at the same time delay relay through 3 s, the use of time relay normally open point back to the motor power supply. The highest point also can add a microdynamic switch the principle is the same! This completes the basic positioning control circuit and the lowest cost.
- Q: How do you differentiate the converter motor from the general motors?
- rter, the motor is the same, but the problem of controlling the frequency converter
- Q: What is the difference between a frequency converter and a regular motor
- The silicon steel of the converter motor is higher than the silicon steel of the ordinary motor, so the eddy current loss at high frequencies is much smaller
- Q: What is the solution to other circuit boards when the servo motor is turned on
- First, the grounding of the servo drive. Second, if conditions permit, it is recommended to replace the power supply of the servo driver to a shield wire and provide a reliable grounding to the shield.
- Q: In the case of ac motor, the voltage will be higher or lower in constant voltage, which will affect the motor.
- Induction ac motor, power frequency rise will increase the speed, the rising frequency motor inductance, the current will be reduced, current motor temperature rise will decline. When the frequency of the power supply decreases, the motor speed decreases, the electric current is raised by the decrease of the motor's inductance, and the temperature rises.
- Q: Can I use the servo motor?
- Ok, red and white black to the nominal voltage, Yellow-green earth or protection zero I don't know how to answer the other nine, I don't know how to answer, haha
- Q: What is the difference between a speed reducer and a regular motor?
- Reducer is a kind of transmission, is generally used in low speed high torque transmission device, the principle is the electric motor, internal combustion engine, motor, or other high-speed operation of the power, through the input shaft of the reducer on less number of teeth on the gear engagement output shaft of the wheel, so as to achieve the aim of slowing down; The ratio of the number of teeth to the size of the gear is the ratio of the ratio of the ratio. Reducer is a kind of the closed in rigid casing of gear transmission, worm drive and gear - worm drive composed of independent components, commonly used for the original reduction drive device between moving parts and working machine. The function of matching speed and transfer torque between the original motivation and the working machine or actuator is very extensive in modern machinery. Reducer according to different can be divided into single-stage and multi-stage transmission series reducer round shape can be divided into cylindrical gear reducer, cone gear speed reducer and cone - cylinder gear wheel reducer; According to the layout of the transmission, it can be divided into expansion, shunt and coaxial reducer.
- Q: In what situations does the step motor lose?
- The meaning of lost step The general motors are three phase six and five phase ten. If you notice, the three-phase six controller has three LED, five in ten and five leds. Three phases: three groups of motors, three lines. Six beats: three LED, and it loops twice before returning to its original state. Each one of the three LED lights flickers in one, and the step goes into the 0.1 wire, alternating between two and a half times, which is 0.6. Generally out of step motor are missing one or two phase, that is to say, there is a line is broken (for motor and controller bad check).
- Q: What is the difference between the brake step motor and the step motor?
- Difference is the brake stepper motor is a kind of applied in special working environment of the motor For example, up and down movement of the table When braking power stepping motor will not move, while ordinary will continue to exercise, it is likely to hurt people or equipment
Send your message to us
Weichai Genset Diesel Power Generator Set 20kw1500RPM 50Hz
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1500 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
