Water Pump with Cheap Centrifugal Best Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1)High performance
2)Mechanical seal
3)Cast iron impeller or bronze impeller
4)Lower vibration water pump
5)Large flow
2.Packaging & Delivery
Packaging Detail: | export wooden cases |
Delivery Detail: | within 30 days once receipt of 30% T/T prepayment |
BPO Irrigation Centrifugal Split Water Pump
3.FEATURES
BPO series single-stage double-suction open type centrifugal pump self-researched by the Company after absorbed advanced technology of similar products and combined application requirement of various customers. The series pump adopts excellent hydraulic model, wider type spectrum and better structure. Pump casing is produced by special machine tool, which ensures concentricity among shaft bearing, shaft and pump case, and provides better reliability and maintainability. Apply to municipal water supply and drainage, water circulation of air conditioner, agricultural hydraulic engineering, such as irrigation, drain flooded fields etc., industrial water supply system, firefighting system, water supply and drainage of
heating system, transportation of clean water
4. OPERATING CONDITION
a)Rotate speed: 2950r/min, 1480 r/min, 980 r/min, 730 r/min
b)Flow range: 64.4~9810m3/h
c)Delivery lift: =200m
d)Medium temperature: =80 ,
e)product adopting special materials: -20 ~120
f)Ambient temperature: Lower than 40
g)Operating pressure up to achieves 2.5MPa
5. MATERIAL
a)Pump casing: Cast iron or magnesium iron
b)Pump cover: Cast iron or magnesium iron
c)Impeller: Cast iron, magnesium iron or tin bronze
d)Sealing ring: Cast iron or tin bronze
e)Pump shaft: 45# steel plated with chrome
f)Dynamic and static mechanical sea: Hard carbide, graphite
g)Configuring other material according to requirement is allowable
Rated flow | 10(m3/h) |
Rated head | 26m |
Rated power | 1.5Kw |
Voltage | 220V |
Rated Current | 7.2A |
Rated speed | 2860r/min |
Discharge diameter | 50mm |
6.Conditions of use
Pumps used in the following conditions should be continuously to work properly:
1. For water pumps suitable medium, medium temperature shall not exceed + 40°C
2. The medium PH value between 6.5 ~ 8.5
3. The volume of medium containing solid impurity is less than 0.1%, the size is not more than 0.2 mm
4. The power frequency 50 hz, voltage for single-phase 220 v, 380 v, three-phase voltage fluctuation range for rating of 0.9 to 1.1 times
5. Diving depth of no more than 5 m, is not suitable for irrigation and drainage of sewage and chemicals.
- Q: I have a well water pump and the motor seems to just run but won't transfer water through the line, checked for leakage, etc but no signs. Even tried priming it but it does nothing. Any idea of what could be wrong or how to repair this problem?
- If the captive air tank has failed you should still get some water flow. if you are not getting any flow and the pump is spinning then the pump may need to be replaced. There is also a pressure switch that may have failed but if that were the case you would have got flow unless the pump burned up. so, bottom line is this. 1) turn power off. let a tiny bit of air out of the Schroeder valve on the captive air tank. if water comes out, the tank is bad. make sure to fill the tank up to about 40psi. 2)turn power off. remove the cover of the pressure switch and clean with compressed air. move the switch back and forth. sand the contacts with emory cloth. 3) if the tank was good turn the power back on and make sure all the valves are open (even the ones you havent touched) if you are still not getting water you should probably call a plumber. most likely at this point you have a bad switch or tank and it has caused your pump to burn up. good luck
- Q: I was was wondering how to calculate the head flow rate from a water pump. The water pump outputs 2 bar, which means that it will push water up to 20m in height. It also has a throughput of 2000 litres per hour.I want to pump water up to my loft, which is approx 15m above the pump.What will the flow rate be at this height? Is it a linear calculation of percentage of drop from maximum head height multiplied by the flow rate, (eg 5/20 * 2000 = 500 litres per hour?), or is it more complicated than that?
- If your pump has more capacity than you need, you can always restrict the discharge and create extra artificial head.
- Q: i took off the lower unit to fix the gears. im not sure ill be able to put it back on with out knowing how things work in there.so how exactly does the water get pumped. and what does it have to do with the gears, because even though the prop wasn't turning, the water was still pumping.thanks.
- did you put the dot of adhesive on the Keyway to hold it from slipping out of place ? Are the pump plates worn around the impeller ? If you just replaced the Impeller and NOT the whole housing, and plates, that is NO GOOD, you must replace the whole unit.
- Q: WATER PUMP, HOSES, 1998 TOWN COUNTRY
- this is just a rought est. but Parts: water pump $129, Hoses $45 Each, Coolant 2 gal $30, hose clamps $ 5. Labor: water pump 1.2 hours @$89 per labor hour = $106, Hoses .4 hours x 2 hoses = .8 @$89 = $71.20 plus a possible cooling system flush $69. So your looking at around $500 bucks.........that is probably a little high Good luck!
- Q: Water pump for 98 Venture?
- To replace the water pump on the 3.4L Venture calls for 1.3 hours labor (about $130) and the pump is about $30 and it is a good idea to replace the thermostat and flush the cooling system to get maximum life out of the pump and your cooling system about $100 so you would be looking at about $350
- Q: I need to replace a water pump on a '95 3100 Pontiac Grand Am and am looking for a guide how to do it. Also, do I need to flush out the coolant or can I just put a pan underneath the water pump and let the coolant pour out when I take the water pump off? Thanks.
- some autos have diverse designs. The water pump on my 96 Century would were finished in a be counted of minutes. the position as some are a lot deeper in the engine. frequently, to modify a water pump like it is extremely somewhat an additional desirable step than replacing the timing belt. it is the reason it is continuously a good idea to do them both right now.
- Q: Why is water pumping cool water is normal, but when pumping hot water pressure and flow are very small?
- Not sure about the LZ what is the specific type of hot water pump pump but it is flow and small pressure must be produced liquid vaporization of liquid vaporization two general situation is the pump pressure alternating is under positive pressure immediately into negative pressure is two high temperature liquid into the pump and to absorb mechanical heat due to the higher temperature is the centrifugal pump if so when the liquid from the inlet to the outlet end of the impeller is thrown when in the state of negative pressure and lower boiling point even if did not reach 100 degrees will boilIf the water pressure and flow rate of small vaporization significantly not only reach the requirement of the pump itself also has a lot of damage caused by mechanical damage is suggested to view the instructions to use if this situation is to contact the dealer in the allowable range of temperatureIf no water is not only the problem of vaporization conditions can be detected under normal pressure inlet check instructions when pumps are used in the allowed suction height within the position and I don't know if the pump there may be no open suction valve or discharge valve and pump parts prior to use at the beginning of irrigation is the first inside in order to produce self suction irrigation
- Q: can this happen that pump is pressurizing system and no flow in suction.
- Hi, It seems to me your question is miss- worded or it simply flew over over my head. I'm intending the same project when time is there for it. I m a' machine builder by trade as also an oilfeild welder so tend to trust my plans about design. My answer to your question is you can't suck water from a plugged pipe except one tiny amount that would create a vaccum. My plan is an inline hot water pump(automotive type) to go to and from the water heater while the pluming route may have radiators or other heat transfer sourses like plane pipeat various points of the house return in an open pipe flow lie.Thermostate control hooked tothe electric motor that drives the water pump
- Q: i'm changing the tyming belt the vehicle has done 120,000 km should i replace water pump as well
- Water pumps get changed when they start leaking or the impeller breaks loose. Not normally changed in a preventive maintenance program.
- Q: We came home one day to find our bathroom floor soaked, and we had no water at all.we later found out that it was the washing machine hose leaking.Our friend primed the pump but isent an expert..we fixed that problem with a new hose.A few weeks after, we started to notice that when you are in the shower, the water would shut off for a minute and come back on for a minute, so on so on, perfectly timed., and this got worse and worse, yesterday it would be on for like 20 secconds and off for 3 minutes... last night the water was working good but today we woke up with no water.The water taps in the house hardly do it at all. I also noticed that when we are running water the water pump goes crazy fast, i can hear it because its a mobile home.
- if you are sure that your well is good then .......... sounds like it is time for a new pump - money saved $150, plumber house call pretty easy fix get your pipe wrenches after you turn of all the water mains and remove the pump - even go borrow some or buy some still cheaper haul it to menards or lowes puchace and identical one in a box - name may be different read the instructions - this is the important part reinstall the pump tada all done - good days work for a novice - accomplished something and earned that hot shower and saves about $300 or more by not calling the plumber - plus that 150 for a total of about 450 - cha ching - new blue jean for the kids, a car payment whatever suits
Send your message to us
Water Pump with Cheap Centrifugal Best Quality
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
