Polyethylene(PE) insulated RF cable SYV50-7-2
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product properties:
Uses: This product is applicable to shared antenna systems, closed circuit television system and other signal transmission, and such cable has the characteristics of small attenuation and strong anti-interference
SYV Solid polyethylene insulated RF cable:
Type | Cable structure parameters | |||||
Inner conductor | Insulation | Outer conductor | Jacket | |||
Structure elements/diameter | Outer diameter | Structure | Nominal thickness | Thinnest thickness | Outer diamete | |
SYV75-2 | 7/0.08 | 1.5±0.10 | Single braid layer | 0.43 | 0.30 | 2.9±0.10 |
SYV75-3 | 7/0.17 | 3.0±0.15 | Single braid layer | 0.66 | 0.45 | 5.0±0.25 |
SYV75-5-1 | 1/0.72 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.1±0.30 |
SYV75-5-2 | 7/0.26 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.1±0.30 |
SYV75-7 | 7/0.40 | 7.30±0.25 | Single braid layer | 1.0 | 0.70 | 10.2±0.30 |
SYV75-9 | 1/1.37 | 9.0±0.30 | Single braid layer | 1.2 | 0.80 | 12.4±0.40 |
SYV50-2-1 | 7/0.15 | 1.5±0.10 | Single braid layer | 0.43 | 0.30 | 2.9±0.10 |
SYV50-2-2 | 1/0.68 | 2.2±0.10 | Single braid layer | 0.56 | 0.40 | 4.0±0.20 |
SYV50-3 | 1/0.90 | 3.0±0.15 | Single braid layer | 0.66 | 0.45 | 5.0±0.25 |
SYV50-5-1 | 1/1.37 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.0±0.30 |
SYV50-5-2 | 1/1.37 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.8±0.30 |
SYV50-7-1 | 7/0.76 | 7.3±0.25 | Single braid layer | 1.0 | 0.70 | 10.2±0.30 |
SYV50-7-2 | 7/0.76 | 7.3±0.25 | Single braid layer | 1.0 | 0.70 | 11.2±0.30 |
SYKV vertical hole PE insulated RF cable:：
Structure | Type | Inner conductor | Insulation outer diameter | Insulation resistance | Characteristic impedance | Capacitance | Attenuation Coefficient | Reference Weight | ||
50MHz | 200MHz | 800MHz | ||||||||
Vertical hole Insulation | SYKV-75-5 | 1/1.00 | 4.8 | 5000 | 75±3 | 60 | 5.3 | 10.8 | 22.9 | 50 |
SYKV-75-7 | 1/1.60 | 7.3 | 5000 | 75±3 | 60 | 3.4 | 7.1 | 15.2 | 95 | |
SYKV-75-9 | 1/2.00 | 9.0 | 5000 | 75±3 | 60 | 2.8 | 5.7 | 12.5 | 153 | |
- Q: my MOBO has a 4 pin connector, but my power supply came with an 8 pin power cable, so what do i do? Also my MOBO has a SATA1 slot by itself, and two SATA slots called SATA 2 and SATA 4. The SATA 1 is by itself, and SATA 2 and 4 are next to each other. so which SATA slot do i plug opticaldrive and HDD in?
- This is about power connector -
- Q: how do i install the power cord on the 8600 gts. Is just attaching one of the two receivers on the cord to the graphics card and the other end plug in one to a power thing the right way.
- Some specialized power supplies have the power cable built-in and you can plug that directly into the card. If you don't have one of these, then the card probably came with a cable that requires you to plug in two 4-pin power cables (same type that plugs into your CD drive off your power supply) and then the other 6-pin end snaps into your video card.
- Q: This is a very small system, just a tape deck, cd player, mp3 input, and a phono pre. This is then run from the L and R outputs from the mixer into a 2 channel EQ, then to a power amp (2x250 @ 2ohm), and from there to 2 vintage kustom speakers.Should I be using TRs or TS cables for all of these connections?FYI the speakers are about 25ft from the power amp on the opposite side of the room
- TRS cables are used for two channels, either to patch stereo signals from one component to another, or for send and return in an effects loop. TS cables are used for single-channel patching, and would typically be used between a mixer and a power amplifier. Speaker cables are different from signal cables, even though they often use the same plugs. Speaker cables should be made of 18AWG or larger 2-conductor wire, whereas signal cables shoud be made of shielded (screened) wire. Be certain to use the correct type of cable for the type of signal being conveyed. You may want to get some local help for this. Someone near you should be able to assist.
- Q: I got two mobile GPS units for my car which use a mini USB interface for powering. One of the units didn't come with a cigarette adapter so I am trying to figure out how to power it. Can I just use a normal USB cable? I would tap the red wire into the fuse box in my car, and ground the black wire to the frame. So:-Can a mini USB cable handle 12V for ~5ft-Is that the right way to connect them?Thanks!
- no because it will explode it only takes 5 to 4.5 volts and 2 to 2.5 volts i recommend using 5 volts and 2.5 watts bye
- Q: I am thinking about buying a hard drive and a SATA to eSATA cable to get more space to store things but I dont know whether or not the eSATA cable supplies power to the hard drive like a USB port. Do I have to buy a power cable for the hard drive or will it work without one?
- I use an external sata for backup with a usb cable converter the power comes from the usb cable, esata I suspect would be similar unless you are hooking it up with arj45 or something?
- Q: Can anyone tell me the best place to run the power cable for my amp from the battery through the firewall? (2000 Chevy Impala)
- Look for where the factory wire harness goes through. there's usually enough room to cut or drill a whole and pass your power wire through. If not, you'll have to make your own hole in a safe place.
- Q: what cables do i need (besides a power cable) to start playing?
- Yeah Power Cable is great and all but are you forgeting the PS3 Controller Charger, The ethernet cable and HDMI Cable
- Q: It's not the original power cable but it's going to my current DVR.
- The cable will work just fine.
- Q: Whether high voltage cables can be built in belt corridors
- The main role is to protect, the secondary role is insulation, there is a role is to decorate.
- Q: Okay so I am trying to upgrade my graphics card and In order ti di That I need a new Power Supply Unit. The PSU I was looking at is a 850 watt one and it has six pin connectors. The problem is all my componets are 4 pin connectors. If I get the new power supply can I somehow get a 6 pin connector to fit in a four pin like a adapter or something. BTW in order for the graphics card to function I need a six pin but all my other stuff in 4. So is there a way to work that out
- exchange the PSU, for a extra powerful one. 430W @80percentefficiency = 344W 500W @80percentefficiency = 400W 600W @80percentefficiency = 480W 650W @80percentefficiency = 520W 700W @80percentefficiency = 560W 750W @80percentefficiency = 600W 800W @80percentefficiency = 640W 850W @80percentefficiency = 680W 900W @80percentefficiency = 720W 950W @80percentefficiency = 760W 1000W @80percentefficiency = 800W minimum PSU 700W-800W.
Send your message to us
Polyethylene(PE) insulated RF cable SYV50-7-2
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
