Polyethylene(PE) insulated RF cable SYV50-5-2
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product properties:
Uses: This product is applicable to shared antenna systems, closed circuit television system and other signal transmission, and such cable has the characteristics of small attenuation and strong anti-interference
SYV Solid polyethylene insulated RF cable:
Type | Cable structure parameters | |||||
Inner conductor | Insulation | Outer conductor | Jacket | |||
Structure elements/diameter | Outer diameter | Structure | Nominal thickness | Thinnest thickness | Outer diamete | |
SYV75-2 | 7/0.08 | 1.5±0.10 | Single braid layer | 0.43 | 0.30 | 2.9±0.10 |
SYV75-3 | 7/0.17 | 3.0±0.15 | Single braid layer | 0.66 | 0.45 | 5.0±0.25 |
SYV75-5-1 | 1/0.72 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.1±0.30 |
SYV75-5-2 | 7/0.26 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.1±0.30 |
SYV75-7 | 7/0.40 | 7.30±0.25 | Single braid layer | 1.0 | 0.70 | 10.2±0.30 |
SYV75-9 | 1/1.37 | 9.0±0.30 | Single braid layer | 1.2 | 0.80 | 12.4±0.40 |
SYV50-2-1 | 7/0.15 | 1.5±0.10 | Single braid layer | 0.43 | 0.30 | 2.9±0.10 |
SYV50-2-2 | 1/0.68 | 2.2±0.10 | Single braid layer | 0.56 | 0.40 | 4.0±0.20 |
SYV50-3 | 1/0.90 | 3.0±0.15 | Single braid layer | 0.66 | 0.45 | 5.0±0.25 |
SYV50-5-1 | 1/1.37 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.0±0.30 |
SYV50-5-2 | 1/1.37 | 4.6±0.20 | Single braid layer | 0.90 | 0.60 | 7.8±0.30 |
SYV50-7-1 | 7/0.76 | 7.3±0.25 | Single braid layer | 1.0 | 0.70 | 10.2±0.30 |
SYV50-7-2 | 7/0.76 | 7.3±0.25 | Single braid layer | 1.0 | 0.70 | 11.2±0.30 |
SYKV vertical hole PE insulated RF cable:：
Structure | Type | Inner conductor | Insulation outer diameter | Insulation resistance | Characteristic impedance | Capacitance | Attenuation Coefficient | Reference Weight | ||
50MHz | 200MHz | 800MHz | ||||||||
Vertical hole Insulation | SYKV-75-5 | 1/1.00 | 4.8 | 5000 | 75±3 | 60 | 5.3 | 10.8 | 22.9 | 50 |
SYKV-75-7 | 1/1.60 | 7.3 | 5000 | 75±3 | 60 | 3.4 | 7.1 | 15.2 | 95 | |
SYKV-75-9 | 1/2.00 | 9.0 | 5000 | 75±3 | 60 | 2.8 | 5.7 | 12.5 | 153 | |
- Q: its 6pin power cable on vga if we went really connect to psu if i not connect to that it ll happen something ?if i want to connect psu or mother board?
- i have no clue what your saying but the 6pin connector is from the psu and both cards require 1 or 2 and do not use vga connector but HDMI
- Q: I like to play my PSP at home quite a bit. When I do I plug in the AC adapter so that the battery power doesn't get used up unnecessarily. I see that when I have it plugged into the wall that under the system information it says that the power is being used from an external source instead of the PSP's battery. I take it then that the battery won't overcharge and it's OK to use it this way, or do I have to remove the PSP's battery when using the power cable?
- It is fine. The PSP is just telling you that it is taking power from the outlet instead of the battery.
- Q: Hi All, i have a star sound 1200w 4way amp which i want to use just for my sub for the meanwhile as im waiting on a monoblock, please tell me if i can install the amp without the fuse that connects straight on the power cable?? and what is the main reasons for that fuse? thanks in advance
- Could you install it without a fuse. Yes. Should you install it without a fuse. No. If your power wire ever got shorted out it would melt and catch of fire. Their have been cars that burned to the ground because they did not have fuses.
- Q: On an ATI Radeon HD 4870 1 GB, It has 2 slots of PCIe Power. In the box, it already has the 2 ''Y'' cables/PCIe Adapter ( I haven't bought it, just watched someone unboxing it). I might not have a PCIe Power Connector on my 550W as I haven't bought it yet either. So when you insert the 2 ''Y'' cables/PCIe Adapter,it branches out 4 Molex slots, do you insert all 4 or 3 or 2 or just 1? If the answer is 2, do you insert one Molex connector on each adapter or both on the ''Y'' Cable/PCIe Adapter?Lastly, Can a ATI Radeon HD4870 fit into a micro-atx casing?Sorry for my bad EnglishThank You =D
- The card needs 2x PCIe power cables so you need to plug in both of them. Each power cable needs 2x molex, so you need to plug all 4 in. Your power supply may also have a PCIe connector anyway so you might as well use that for one of them if you have it (it can't be used for anything else anyway) and then just use 2x molex to power the other one.
- Q: Can I use 300 v power cable on a cx500?
- The volt is not a unit of power. As the voltage supply in any country is 100V-240V then your cable is o.k. The important thing is the gauge ie the current (Amps) it can carry. As the mains power circuits in most countries is fused at 13Amps - 16Amps your cable has to be safely above that Amps are the thing that will cause a cable to overheat and catch fire Therefore check the gauge of you cable
- Q: I bought a grand am and i was going to install a amp. in the trunk there are servil wires comming out of the side but idk which is with what does the power cable look like? the rc cables remote ect? all the ends are just cut off
- Check the vigour cord with a scan gentle (on the amp). If it's well, determine the blue cord from the deck to the amp (transfer) whether it is well, hook the scan gentle to the vigour cord and determine the bottom. Good good fortune
- Q: I have had my Sony Laptop for about 2-3years. And only recently is it acting weird.When I have my power plugged in, the laptop runs fine and can be on as long as the power cable is in. But as soon as I take my power cable out, it automatically shuts down.I checked the power management, and it says my battery has 0% power. I have tried taking the battery out and putting it back in, but it still does not work.The lights on my laptop indicate it is charging, but it does not put any power into my battery and the only way it can run is if my power cable is plugged in. The battery is pretty much dead :/Is there any solutions to this? Considering I bought it in the UK and now live in the US
- The battery is toast. You will most likely need to buy a new battery for it.
- Q: I need this for my HD slim that just gets power from USB and my music class the USB items they use suck all the power.but i have a wall USB power source.
- Yes I'm sure this would work. Just solder the red and black wires to an other usb cable and leave the other 2 data ones going into the computer. Plug the power usb cable into your adaptor and It should work. The device is still getting the 5volts it needs so I see no reason why it shouldn't work.
- Q: I need help asap before I lose my patience with my dog.
- Try Radio Shack or if it has a 3 prong socket any computer power cable will work.
- Q: I have a Raidmax 730w power supply, and its modular. there is only one plug in for a 6 pin, and the cable has 2 different 6 pins on the same cable. Will this cable be able to run 2 different video cards running XFire? or will is also be able to run say a 6870 that requires 2 6 pin connectors?
- You should be able to feed two cards that each require 1 6/8 pin PCI-E power source... or 1 card that requires 2 6/8 pin PCI-E power source. A cable with 6 pin provides 75W power to the card. With the 75W available on the PCI-E x16 slot, that would be a 150W supply. 2 6 pins will up the available wattage to 225W. Cards that require a 6 pin and 8 pin are 300W cards. Your cable/PSU port is designed to provide any of those combinations of power to the videos card(s).
Send your message to us
Polyethylene(PE) insulated RF cable SYV50-5-2
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
