35kV or Lower XLPE Insulation Power Cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Application
It is used to transmit and distribute power in power transmission and distribution system of 6～35kV. It is generally applied to the fields including power, construction, mines,metallurgy, petrochemical industry and communications. And it is used as replacement of oil-immersed paper insulated power cable and partially as replacement of PVC insulated power cable.
2. Type and Specification
Voltage | 6/6 kV、6/10 kV、8.7/10 kV、8.7/15 kV、21/35 kV、26/35 kV |
Type | YYJV62、YJLV62、YJV63、YJLV63、YJV72、YJLV72、YJV73、YJLV73、YJV、YJLV、YJY、YJLY、YJV22、YJLV22、YJV23、YJLV23、YJV32、YJLV32、YJV33、YJLV33、YJV42、YJLV42、YJV43、YJLV43 |
Size （mm2） | 1 Core: 25～1000； 3 Core: 25～500 |
Standard | GB/T 12706-2008 |
3. Using features
① Rated voltage Uo/U includes 0.6/1kV, 1.8/3kV, 3.6/6kV, 6/6kV, 6/10kV, 8.7/10kV, 12/20kV, 18/30kV, 21/35kV, 26/35kV.
② The highest allowed operating temperature of conductor for long-term working is 90℃. In short-circuit (Max. long-term is no more than 250℃)
③ D.C. resistance of the conductor complies with the stipulations of GB/T 3956.
④ Installation ambient temperature should be no lower than 0℃. Otherwise it should be preheated. The Min. bending radius should be no smaller than 15 times of cable outer diameter.
⑤ The cable is laid without horizontal drop limit.
⑥ Working Frequency Voltage Test:
For cable with Uo of 3.6kV or lower: 2.5Uo+2kV/5min without puncture;
For cable with Uo of 3.6kV~18kV or lower: 3.5Uo/5min without puncture;
For cable with Uo of 21kV and 26kV: 2.5Uo/30min or 3.5Uo/5min without puncture.
⑦ Partial Discharge Test: The discharge volume should be no more than 10Pc under 1.73Uo for the cable. There shall be no detectable discharge under the declared sensitivity test.
4. Picture of structure
1、Conductor 2、Conductor shield 3、Insulation 4、Insulation shield 5、Copper tape shield 6、Filler 7、Tape 8、Inner sheath 9、Armor 10、Outer sheath
- Q: i bought a car from some guy..he had 2 amps but he took out one...he had the power cable running from one amp to the other. i just recently bought another amp and i was wondering if its safe to do this.he said it was working fine..he was powering 2 10 subwoofers..thats what im planning to do
- its safe but its better to run 2 separate wires due to you are wanting to use more power and one wire has a max load that it can handle...you run 2 and you will have more power to each amp
- Q: Hi, my computer power supply does not have a PCI-E 6 pin power cable for my graphics card, so therefore I found a 2 (4 pin molex) to 1 PCI-E power cable Y adapter.
- Motherboard doesn't provide that connector for the video card. the power supply does. Take the side panel off and see if it has one. Can always use a 4/6pin adaptor. Most retail cards come with one. Just make sure you have enough watts and +12V amps on the PSU to run the new card. A lot of video card upgrades require an upgrade for the power supply as well.
- Q: Do you need to use both the 6 pin PCI-E power cable and the 8 pin PCI-E power cable on a video card? Why are they used? To give power to the video card if needed? Seems like the motherboard gives the card power as well?
- Different cards have different power requirements. Yes, you need to connect all of the power cables. For example the Radeon 5770 has only a single 6-pin connector and runs fine on a 450W power supply, while the Radeon 4870 and GTX 250 require two power connectors from 500-550W (or higher) psu. Cards draw some power directly from the slot (They can draw more under PCI-E 2.0 and later than version 1.1 or 1.0)
- Q: Does the ps4 and ps3 have the same power cable?
- Yes it does Adding to that, you need a TV with an hdmi port Also, the power cable doesn#x27;t come with a brick like the Xbox one does
- Q: why is power cable not recognized by notebook?
- This most likely isn't a windows 7 problem at all. It's more likely there would be some damage to the internals of your power cable at some place. Usually if there is, it's in the connecting end or the power conversion box. I would try a replacement cable first if you can. If you don't' have one, take it to a pc shop and see if they can use a test adaptor. If theirs works, it's the adaptor. If theirs doesn't, it's then more likely the power port on your pc is damaged.
- Q: I need to select a power cord for a computer and other appliances (like a printer). Power cords usually have their amps and voltage (capacities?) imprinted on the outside. What is the rule of thumb for selecting a power cord and why?For example, if my printer has the following requirements:Power Source AC 120V 50/60 HzPower Consumption - 5W-350WWhat amp/voltage type of power cord will do the job?I am of course concerned about overloading the cord with too much electric requirements.(People who actually know this matter SPECIFICALLY only need to reply; please excuse if the electric language is not used right.)
- A 5A cord would do the job.
- Q: is not giving direct contact to my lights....so i just want to replace the power and ground cables for the headlights.??? please help
- The power for the headlights comes from the front fuse/relay box, usually on the drivers side wheel well under the hood. There should be a relay in the box for the headlights.
- Q: I am trying to install a new Power Supply Dynex 520 Watt ATX and I cannot figure out what cable to connect to the hard drive. It was very small and I had a hard time connecting it. Do you have a clue?
- It okorder /
- Q: Will it work if I put a pigtail (connect the wires by twisting them together) or does that stop it from working properly..
- It is possible to reconnect a severed cable... but unless you know what you are doing and have the special tools and parts to make a proper splice, I would not attempt to do so. The current passing through the laptop transformer is pretty high voltage stuff. If you should happen to cross-connect or develop a short across your splice, you could get a nasty shock, fry your computer or even start a fire. Electricity can be tricky stuff. Make sure you know what you are doing or you, your computer or the both of you could end up in a very bad way. In the long run, you're much better off simply buying a new replacement power supply. Good luck! ***ADDITIONAL*** If the battery light is constantly blinking, the battery in the computer could be dead as well (not surprising given the state of the charger). You probably need to replace both the battery and the charger.
- Q: If you look at a power line it is hanging down in the middle why is that
- gravity. Power lines are not light. If you try to pull them tighter, to reduce the amount of sag you can break the line itself, or put tremendous strain on the support towers.
Send your message to us
35kV or Lower XLPE Insulation Power Cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
