0.6/1kV Copper XLPE Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
0.6/1kV Copper XLPE Power Cable With Steel Tape Armour
Standard
The product according to GB/T12706 " rated voltage 35KV and below copper, aluminum plastic insulated power cables " standards, while also based on user needs by the International Electrotechnical Commission standard IEC, British Standards , the German standards and U.S. standards.
Application
This product is suitable for frequency 0.6/1KV and below rated voltage distribution networks or industrial installations in fixed installations.
Feature
Rated power frequency voltage U0 / U is 0.6/1KV.
Allow cable conductor maximum temperature is 90 ℃.
Short (the longest duration of no more than 5s) conductor temperature does not exceed 250 ℃.
The ambient temperature should not be less than 0 ℃.
Cable bend radius of not less than 15 times the cable diameter.
Introduction of our company
Our company is a professional China Wire and Cable Manufacturers, mainly supply Aerial bundled cable,House Electric Wire, Insulated Overhead Cable,Aluminium Conductor Steel Reinforced, PVC Control Cables,XLPE Power Cables,BV Electric Wires,Nylon Sheathed Cable,Buried Cable,High Voltage Cable,House Electric Wire,Single Core Flexible Copper Cable,Civil Wire And Cable etc. series of wire and cable products, sincerely welcome everyone to visit.
- Q: The inside of my computer has a modular power supply that did not come with enough cables, and I have a graphics card that requires two 6 pin connections to the power supply. Luckily, my power supply has just enough open slots. The problem is that I can't find a place to buy a simple 6 pin cable. It needs to be about a foot long to reach. Can someone please help me? I would prefer newegg if possible, but I searched there and I'm getting pretty frustrated.
- You'd need to buy it from your PSU's manufacturer as those tend to be proprietary. It's strange it didn't come with all the cables though.
- Q: I don't know what kin d of power cord i would need in order to make it work. I thought all monitors needed the same power cable, but im not sure.
- Most equipment uses the IEC plug on the monitor end and the particular power plug your country uses for the other end. Your monitor handles all the international voltages, so you can be sure it will work anywhere.
- Q: The computer is a Hp compaq.So I took the connector out of the computer but left it in the power socket.When I tried to reinsert the connector I hit the metal back panel of the computer and it made contact so I was wondering what is the part(s) that is likely to be broken?I want to know it so I can replace the damaged parts.Thanks in advance of your help.
- You were observing anti static procedure? you mean you shorted it out ..what were you doing working on it when its plugged in... i give up expensive mistake
- Q: When the tv repair company comes out do they take your tv power cable or have there own one for tv
- All TV repair people have all the power cables they could need. BUT... if they think that your fault could simply be a fault in your cable, then they may take it with them, though they would be more likely to try swapping it on your premises before removing the set.
- Q: If I put pressure on the cord I have power but its almost impossable to work. A local computer repair said I have to replace the mother board. Can't the plug in the back be replaced? Thanks!
- Your local PC repair shop must be run by mildly retarded individuals...a loose power cable has nothing to do with your motherboard. You can try getting a new plug...if that doesn't work I might try replacing the power supply... LOL dr.bucksnort....I love it...nice one
- Q: What are the causes of the power cable fire accident? How to prevent
- with a white cable to facilitate the distinction between the cable
- Q: Why did my power supply entrance burn with the power cord cable the stats of my computer are: HP Compaq dx2250 Microtower PCProgram: Windows 8 32bitPowerSupply: 500w MaxGraphics Card: Nvidia Geforce GTX 550 tiWhy cause it to burn? What should I do? Change the power supply or buy a better power cord cable. The cable that burn, I bought it on OKorder for $2, I am not sure if this cause the problem, but for sure I need to buy a power supply because the entrance burn. What should I do? Is my computer stable with all this stats? What cause this to happen? Was the cheap power cord fault? I don't know, please answerThank You,
- A dodgy power cable can very easily singe or burn the power socket on the computer. In general, the lighter the cable, the more dodgy it is. $2 is nothing - I would buy a more expensive cable. The cents you save isn't worth it when your house is on fire. It's impossible to know whether your power supply or other computer components suffered any damage because of the electrical fire. You could try testing with a multimeter, but you should probably replace the power supply at a minimum.
- Q: Hey y'all , so I got this LG X120 Netbook thing and although it works fine when power supply cable is connected, it won't play just by getting supply from its own battery..also i tried starting it up with the power cable on, and after a few moments I unplugged it, and the screen went black-I mean the netbook was turned off by itself..any help with that? thanks
- lg has not got reports like these there might be sum internal fault in the hardware of the pc so u should try to exchange this or buy a lenovo 1
- Q: My power supply cable to the motherboard is only 20 pin and the motherboard has a slot to take a 24 pin power cord. The 20 pin will fit but 4 slots are just left empty. The motherboard LED light comes on showing it has power. When I try to boot up the motherboard runs but the hard drive doesn't boot or the screen isn't working. Could this be b/c of not having a 24 pin power cable?I know the video card and HD work b/c I just transfered them from another motherboard that was a 20 pin. Any ideas?
- I believe it'll work, 4 pins will just hang off to the side. The same goes for 8 pin power cables to a 4 pin power socket on the motherboard.
- Q: Hi,I have problem with power cable on Karcher 670m pressure washer. I pulled all of the power cable out and now it's stuck and doesn't roll back inside. What can i do to fix it?Sven
- Throw the piece of crap away. Just kidding, but it wouldn't make sense to take it to a repair shop when you could buy a new one for $100 bucks. Just roll the cord up when your finished using it.
Send your message to us
0.6/1kV Copper XLPE Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
