0.6/1KV Copper XLPE Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
0.6/1KV Copper XLPE Power Cable With Steel Wire Armour
Operating Characteristic
Rated voltage: 0.6/1(1.2)kV;
Max. permissible continuous operating temperature of conductor: 90 °C;
Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed: 250 °C;
The ambient temperature under installation should not be lower than: 0 °C.
The bending radius of cable is recommended as following:
For single core cable: not less than 15 times of the diameter of cable
For multi-core cable: not less than 12 times of the diameter of cable
When the armoured single core cable used for Alternative Current(AC) system, the armour material should be non-magnetic.
Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid in high fall area, able to bear external mechanical force, and certain pulling force.
Manufacturing Standard
GB/T 12706-2008, IEC 60502-1
Introduction of our company
Our company is a professional China Wire and Cable Manufacturers, mainly supply Aerial bundled cable,House Electric Wire, Insulated Overhead Cable,Aluminium Conductor Steel Reinforced, PVC Control Cables,XLPE Power Cables,BV Electric Wires,Nylon Sheathed Cable,Buried Cable,High Voltage Cable,House Electric Wire,Single Core Flexible Copper Cable,Civil Wire And Cable etc. series of wire and cable products, sincerely welcome everyone to visit.
- Q: The difference between the power cable YJY22 and YJY23 is in the outermost layer, one for the PE sheathed, one for the PVC sheathed. What is the applicable environment, and why? Question added: I have to ask is the difference between 22 and . not 22 and 32! Thank you for the answer. Learn more together
- 35 square copper wire current carrying capacity is 105A, 105A / 35 mm2 = 3A, (1 square millimeter carrying capacity is 3A) 70 square copper wire current carrying capacity is 169A, 169A / 70 square millimeters = 24A (1 square millimeter carrying capacity is 24A) 1 square hai load current from 11A gradually become 24A So it is impossible to use n by the coefficient can be drawn to the current value Wire can carry the current * the applied voltage * power factor = can drive power The diameter of the wire with different diameter is not the same No specific diameter can not know the current carrying capacity How much power, depending on the voltage level Because P = UI As the saying goes: a square 4 current, underground than this small forget How much is the square here is a square millimeter Power depends on your voltage, the general small line can be directly by 5 is to eat the current to 50-120 the basic can take more than 35 can take 25 or so just personal experience to do reference to the need for basic data: 1 line, copper and iron Aluminum silver temperature 3 core number 4 diameter Probably take a square 5A diameter n square of the wire can be over n high current, resulting in n high power so that can be calculated
- Q: if i remove the power cable and switch on it works normally without restarting , plz help with this ~?
- go in control panel and set ur laptop settings to not to start while swith in
- Q: I need a power cable for an XBox 360. where can i buy one?
- Circuit City
- Q: I know there is problem in the CPU, please suggest what is the problem and how much it is going to cost me?
- The power cable goes in the power supply, not the processor (CPU: Central Processing Unit) That's your problem
- Q: There are a few thin cables running from the power button on your computer onto the motherboard. What are these cables called?
- Go to pc repair shop. And ash them.
- Q: hi i need some extra help in looking for a power cable for my pioneer kuro tv cable iv looked in OKorder and on pioneer and no joy does anyone have any ideas where i could get one please any help will be gratefully received thank you
- It should be one of a couple standard styles. Electronics stores should have them.
- Q: I don't want to run it under the car, but I can't find a place to run it through the firewall... Do I need to drill a hole?
- I think you need to look at what ever is going through the fire wall first. often you will find things like speedo cables and other cables that go through it using a grommet, if they is a 8mm plus one used you could puch your power cable through the same grommet, this will save the drilling but if you do have to drill use a grommet to seal the hole, it costs only cents.
- Q: my sub came loose and started sliding around in my boot until the power cable got ripped out of the amp while i was driving at it was on. When i tried putting the power back in it just blew the fuses, so i bought some more, and they blew as soon as they went in as well, and one of the bits of metal melted putting one it! strathfield said its 45 for an inspection, plus the cost of fixing it. any ideas whats wrong with it and if i can fix it myself??cheers.
- You can repair this if you already know what you are doing. Each wire in the cable terminates on a specific terminal. (A power cable can be expected to have 2 wires, a red and a black for pos12v and neg12v respectively. Reverse these wires even for a moment and wave your amp goodbye, unless there is protection built in if you're lucky) So ... Do you know all the repair proceedures? Do you know what wire belongs to what terminal? (No trial and error allowed here) If you have any doubt about doing this right first time then you are unable to fix it your self, and it would be better to take it to the experts and pay for repair.
- Q: I bought a 9800 gtx card, and it needs 2 power cables connected to the power supply for it to work. It's a monster card. My power supply has one pci express power cable only. Will I need adapters to plug into my power supply?
- The adapter must have two of the four pin Molex connectors. It uses three of the wires, in the four pin Molex connector. (3 wires x 2=One 6 pin PCI-Express power connector)
- Q: (for example : 1sqmm, 4sqmm, 35 sqmm) i need a formula to calculate current by knowing the area of the cable?
- Hi Sherlock, You need a copy of BS 7671 The IEE Regulations. By the cable sizes mentioned you must be in the UK. The current carrying capacity of a conductor is a function of its Cross Sectional Area, Length, Method of installation, Is it grouped with other circuits, Ambient Temperature and fuse or CB type. (these are called multipliers) For larger cables the power factor of the load must also be considered. The basic formula assuming no multipliers are used is Volt Drop per ampere per metre X length of run X Design current / 1000 Volt drop is from the tables in BS 7671 Length of run is the cable length design current is the current the cable will have to carry in normal use 1000 is because Vont Drop per Amper per Metre is given in millivolts
Send your message to us
0.6/1KV Copper XLPE Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
