Wire Rod Q235
- Ref Price:
-
- Loading Port:
- XINGANG PORT,China
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 Tons m.t.
- Supply Capability:
- 100,000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications of Wire Rod Q235:
Steel Grade: Q235, Standard: GB Diameter: 5.5mm, 6.5mm, 7mm,8mm,9mm,10mm,12mm,14mm
Diameter Tolerance:±0.3mm 6.5mm can be drawing into 2mm/8.0mm can be drawing into 3mm
Brand Name: N-RIVER Place of Origin: Hebei, China Mainland Application: construction, building etc
Chemical Composition:
Please kindly find our chemistry of our material based on Q235 as below for your information
|
Trademark |
Rank |
Chemical composition (quality score) % |
|||||
|
C |
Si |
Mn |
S |
P |
|||
|
|
≤ |
|
≤ |
≤ |
|||
|
Q235 |
A |
0.14-0.22 |
0.30 |
0.30-0.65 |
0.050 |
0.045 |
|
|
Q235 |
B |
0.12-0.20 |
0.30 |
0.30-0.70 |
0.045 |
0.045 |
|
|
Trademark |
Rank |
Pulling Test |
|||||
|
Bend PointΔs/Mpa |
Tensile Strength |
Elongation Ratioδ5% |
|||||
|
Thickness (Diameter) /MM |
Thickness (Diameter) /MM |
||||||
|
≤16 |
16-40 |
≤16 |
16-40 |
||||
|
≥ |
≥ |
||||||
|
Q235 |
A |
235 |
225 |
375-500 |
26 |
25 |
|
|
Q235 |
B |
235 |
225 |
375-500 |
26 |
25 |
|
Usage and Applications of Wire Rod Q235:
After hot-rolled the products shaped into coil and delivery as finished product, including round, square, rectangular, hexagonal and so on. Since most of the products are round, it is generally called wire rod. Carbon steel wire rod is widely used in construction and manufacturing. Carbon steel wire rod is mainly used for reinforcement of reinforced concrete and welded structure or reprocessed (roberts , nail, etc.) materials, especially used to produce wire drawing, welding electrode, nails, spring, electronic, precise machinery parts and so on.
Packaging & Delivery of Wire Rod Q235:
Packaging Detail: products are packed in coil and then shipped by container or bulk vessel
Each coil weight: 2-3MT
Delivery Detail: within 45 days after received deposit or LC.
Label: to be specified by customer, generally, each bundle has 1-2 labels
Trade terms: FOB, CFR, CIF
Wire Rod in Container
Wire Rod in Bulk Vessel
Note:
1. Our products are produced according to national standard (GB), if not, supply according to national standards (GB) or agreement as customer required.
2. Other Grade and Standard carbon steel wire rod we can supply:
Grade: SAE1006-1018, H08A, 30MnSi, 62B-82B
Standard:ASTM, AISI, BS, JIS, DIN
The Minimum Order Quantity of these products is high, and need to be confirmed.
3. We can not only supply carbon steel wire rod; if you need anything about building materials, please contact us.
4. Please send us your detail specifications when inquire. We will reply to you as soon as possible. We sincerely hope we can establish a long stable business relationship.
- Q: I found an old Karavan flatbed utility trailer and am currently converting it into a snowmobile trailer (2 place). Me and a friend riped all the wire off of the trailer and completely rewired it. No matter how we configure it, the lights aren't coordinated. If we hit the left blinker in the car, all the lights flash(like the hazards are on). Right blinker works fine. we wired it first from the diagram on the karavan site. Now once we think about it, they have us wiring the ground into the light. so we searched the web and found this layout.
- The problem is the difference in 4 to 6 wire . Go to an auto parts store and get the converter . It wires into your car between the plug and the tail-lights .After that , no problem with older trailer wiring .
- Q: I keep thinking that the wire would cut into the bark when the bonsai is growing.I want to wire it now because it is easily manipulative, but I don't want to prevent trunk growth
- Wire it, let it grow a bit. Then, as necessary, undo the wire, then rewire it to fit the new size. An alternative is to append weights, or tie strings to other objects or parts of the plant instead of wiring a whole branch.
- Q: I want to connect one of my rear sony speakers along the baseboard to my receiver. The specs say that the wire comes with 4 terminal blocks, with 4 connections on each terminal. My question is what will connect to what? Will the speaker attach the the flat wire cable that will attach to the original speaker cable which will connect to the receiver? It will be much appreciated.
- The flat wire is what you run under carpets, along baseboards, etc. The four wires allow you to run a pair of speaker wires (two sets of two) from your receiver to the general location where the speakers will be. The terminal blocks allow you to run regular speaker wires from the receiver to the flat wire. The terminal block at the other end then lets you run speaker wire from a terminal block at the other end of the flat wire to the pair of speakers that wire feeds. It doesn't matter which wire goes to which speaker, as long as you wire it up correctly. That is, you can have the first terminal be the + wire for the first speaker, the second the - wire for that speaker, and the third and fourth wires being the + and - wires for the second speaker.
- Q: I have an old house and am replacing a dimmer switch in the kitchen.The old switch is has only 2 wires coming out of the switch that are both black. From the wall 2 wires connect to the 2 black wires on the switch, one is black which I have concluded is hot and the other is red, which must be the common wire. My question is that there is a 3rd wired that is pushed into the electrical box that is capped and not being used. This wire is white. I can only assume that would be a ground wire, but why would it be white in color. Can you tell me what the coloring scheme was for wiring old houses? Now I can connect the switch and use only the black and red wire, but would like to ground it properly if possible.
- These would be normally. You should have them checked before you connect something. Black is hot White Neutral Red wires are also used for hot wires, switch legs (like to a ceiling fan), and are the second hot wire in 220-volt installations. Another useful application is the interconnect wire between two hardwired smoke detectors. A ground would be green or bare.
- Q: Hi I have a ceiling fan/light to put up but after taking down the original rose, I am now unsure how to wire the existing wiring into the ceiling fan the wiring is a s follows:block 1 Live empty,red,red, block 2 loop all empty, block 3 neutral empty,black,blackthe connections on the fan are live neutral and earthGrateful for any help
- Don't hurt yourself...Get someone with a volt meter to help you find which wire it what
- Q: im trying to install a cd player i need to know where i can hook up power(red) , constant(yellow), and my amp seems to take alot for remote wire so i need a good source for it too i also have a eq to power but dont know if it will work with the same source as the radio
- Before you go through the painful task of rewiring all your speakers, don't. Go to a stereo shop and purchase the amp bypass plug that is available for your Explorer. It will plug into the 2 plugs you pulled out of the factory amp which will allow you to connect your radio to the factory harness in the dash as normal. You also want to use the proper adapter harness in the dash for that. It will be color coded to the aftermarket radio so there will be no question as to which wire goes where. The red and yellow wires on the unit will go to the red and yellow wires on the harness.
- Q: electroluminescent wire picture?
- What about it?
- Q: Is it better to have a wireless internet connection or a wired connection for my ps3 online games?
- Wired is much better, because it works faster, it's secure, far more reliable. The only downside of a wired connection is a necessity to mess around with cables. On the other hand, you do it only once. I'm using a wired connection.
- Q: wiring diagram
- Hunter Ceiling Fan Wiring Diagram
- Q: trying to install aftermarket side mirrors w/turn signals and don't know where to locate the turn signal wires.it's for an 06 chevy cobalt LS automatic.Also is it okay to use electrical tape on the wires themselves after connecting them?
- should be pretty simple if you like puzzles. You can trace the signal wire out to the front of the car by using a voltmeter and watching the meter rise each time the signal works. Yes you can use electrical tape on the wires themselves after connecting them.
1. Manufacturer Overview
| Location | Qianan, China |
| Year Established | 2002 |
| Annual Output Value | Above US$ 2,500 Million |
| Main Markets | America, Japan, England, Germany, Korea, South Aisa and Southeast Aisa |
| Company Certifications |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Tianjin |
| Export Percentage | 60% - 70% |
| No.of Employees in Trade Department | 21-30 People |
| Language Spoken: | English; Chinese |
| b) Factory Information | |
| Factory Size: | Above 900,000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | OEM Service Offered; |
| Product Price Range | High; Average |
Send your message to us
Wire Rod Q235
- Ref Price:
-
- Loading Port:
- XINGANG PORT,China
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 Tons m.t.
- Supply Capability:
- 100,000 Tons Per Month m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
