Modified Polypropylene Insulated Logging Cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Introduction:
The product is manufactured according to the standard of SY/T6600—2004.
This product is applicable to all types of oil and gas well logging, perforation, coring and paraffin oil wells, viscosity, pour point and so on. It’s such kind of oil field exploration armored steel cable which could bear all the above mentioned mechanical load.
Operating Characteristics:
• The lowest temperature that cable could work should not lower than-300C.
• Max temperature is 150 0C for short period ( 2h maximum duration each time).
• Minimum bending radius is 30 times of cable diameter.
Specification:
Type | Nominal Diameter mm | Conductor nominal cross section mm² | Conductor structure No. / diameter | Rated pull-off Force kN | Conductor DC Resistance (20℃) | Insulation resistance (20℃) | Capacitor (1kHz) | Frequency voltage test |
WGSB-4.7 | 4.70 | 7/0.32 | 15 | ≤36.00 | ≤0.17 | 1KV | ||
W4B-4.7 | 4.70 | 0.22 | 7/0.20 | 13 | ≤84.30 | ≥200 | ≤0.19 | |
WGSB-5.6 | 5.60 | 1.01 | 19/0.26 | 25 | ≤18.10 | ≥200 | ≤0.22 | |
W3BP-5.6 | 5.60 | 0.24 | 7/0.21 | 25 | ≤84.30 | ≥200 | ≤0.17 | |
W4BP-5.6 | 5.60 | 0.24 | 7/0.21 | 25 | ≤84.30 | ≥200 | ≤0.15 | |
WGSB-8.0 | 8.00 | 1.02 | 7/0.43 | 45 | ≤18.10 | ≥200 | ≤0.14 | |
W3BP-8.0 | 8.00 | 0.56 | 7/0.32 | 45 | ≤36.00 | ≥200 | ≤0.18 | |
W4BP-8.0 | 8.00 | 0.49 | 7/0.30 | 45 | ≤36.00 | ≥200 | ≤0.20 | |
W7B-6.4 | 6.40 | 0.24 | 7/0.21 | 25 | ≤84.30 | ≥200 | ≤0.13 | |
W7BP-10.8 | 10.80 | 0.56 | 7/0.32 | 80 | ≤36.00 | ≥200 | ≤0.19 | |
W3BP-11.8 | 11.80 | 0.56 | 7/0.32 | 80 | ≤18.10 | ≥200 | ≤0.14 | |
W7BP-11.8 | 11.80 | 0.56 | 7/0.32 | 80 | ≤36.00 | ≥200 | ≤0.14 | |
W7BPP-11.8 | 11.80 | 0.56 | 7/0.32 | 80 | ≤36.00 | ≥200 | ≤0.16 | |
W7BP-12.6 | 12.60 | 0.56 | 7/0.32 | 80 | ≤36.00 | ≥200 | ≤0.14 | |
W7BP-13.2 | 13.20 | 0.56 | 7/0.32 | 85 | ≤36.00 | ≥200 | ≤0.14 |
- Q: Hi,I am trying to install a new dvd drive into an old xbox 360.Can anyone tell me which way around the power cable goes into the back of the drive?Both connectors have two empty pin sockets and one of the connectors has a black dot on it.Does the one with the black dot on it go into the motherboard or the DVD drive?Thanks.
- look man really you need to call the company of the DVD cuz really it will mess up YOur xbox 360 so just think before you act and plus ! it will cost you loads of money...
- Q: So I've had my laptop for about a year and a half now and I've gone through 4 power cables, 3 non-factory. What happens with each one is, I plug it in, the blue light surrounding the hole turns on, the end of the power cable that plugs into my laptop gets super hot and either melts the power cable, or when I plug the cable in, the light won't come on unless I have it in just right. This usually starts to happen between one and three months after I get a new cable. It's starting to go through them faster now, any ideas?
- Get it repaired. There might be a short circuit inside the socket. It will ruin your computer if you dont act now. You will lose your laptop or spend more if the laptop itsel gets damaged.
- Q: It's a mains electrical cable, like a kettle or computer, 3 pin but with a little groove under the 2 pins. Please help.
- If you are in the UK, it is 13amp insulated, power cable with live, neutral and earth wires.
- Q: I've got a 1994 Mitsubishi Eclipse GS 1.8 and I can't find any place to put the amp cable through the firewall! Any tips would be greatly appreciated. Thanks ;).
- It's simple really. If you have a drill will a power cord attached to it, simply drill a hole big enough for the power wire to fit thru. Try to do it about midway down the firwall as to not hit anything in your dash. Thats where I have done it before and have had no problems whatsoever out of it.
- Q: I just bought an electric guitar and an Ibanez Ibz10g 10 watt amplifier. I read the reviews for the amp and someone said it only comes with the power cable.1. Is this true?2. If so will I be able to play with just a power cable or do I have to buy other cables separately?This is probably a stupid question but I seriously have no idea what cables are required for electric guitar. I ordered it from OKorder yesterday and couldn't find any details about what it comes with.
- The diagram is the important part, it just explains where the cable goes. Good luck! :)
- Q: Hey guysA 6mm power cable can hold up to 25A, but, if a product draws a maximum of 4A, in theory, can this 6mm be reduced? If so, by approx how much?Cheers, much appreciated!! :)
- Your wire has to be matched to the circuit breaker. If you have a 15 amp breaker you need #14 wire. Otherwise you could overload the wire and burn it out and the CB wouldn't blow.
- Q: What are the cycles and requirements of the experimental project of the power cable experiment?
- In addition to considering the security issues, there is no problem, you can use this, there is no impact on the charging situation, rest assured
- Q: What is the cable bucket in the power cable installation project?
- Is the separator divides the bridge into 2 and a half, usually with two different roles of the cable at the same time laying in a cable bridge, such as the power cable with the signal cable with the bridge laying, in order to avoid electromagnetic interference, with separator separation.
- Q: i just got a new motherboard but after reading throuhg the manual i coudnt get any instructions on which cable goes which way. pls i need some one to help me. all other connections are okay i suppose but afraid to just connect the power,and the reset button cable any how.
- Well... if they're the big white plastic plugs, then you aim the clip for the notch and you're good to go. If they're the smaller plugs that look amazingly like jumpers... then your motherboard should have come with a diagram to show how to plug them in. If not, look on the motherboard and see if you see metal pins with text closeby that says things like PWR SW or RST or HDD LED or PWR LED, or something similar. Generally, the text will point in the direction that the plug needs to go. Also, you generally want to make sure that the open metal part of the plug faces towards the inside of the two rows of metal pins (should be a row of 4 and a row of 5). Hope that helps.
- Q: I am using a Peavey Windsor half-stack that I've had for a little over a year now. It's 300 watts, 120 VAC (whatever that means), and 60 Hz. I lost the power-cable so I bought a new one, but I wanted to make sure there's no risk in using it. I'm pretty sure it's safe but I'd hate to overpower it if that's possible.
- It means that it has 300 watts of power . Thats a lot of power. 120VAC means that you connect it to a regular wall plug. If you can connect it to the amp and the wall socket , you got yourself an amp.
Send your message to us
Modified Polypropylene Insulated Logging Cable
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 30000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
