Car Lift Manufature Automobile 4 post Lift/Car Repair
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
It's use for car workshop to repair car and hoding the car.
Main Features
1. Single hydraulic cylinder drive.
2. Manual release from one side.
3. Mechanical safety latch in four columns' back
4. Adjustable distance between two platforms can be well applicable to vehicles of different width.
5. Automatic stop in the highest position.
6. Anti-surge valve that equipped in hydraulic joint ensures no danger in case of oil hose broken.
7. Relief valve protect against overloading.
8. Valid protection system for steel cable broken.
9. Front and rear positioning wheel stop.
10. Suitable for four-wheel alignment.
11. "UP" "DOWN" "EMERGENCY " button on control panel,simply operation.
12. 24V low-voltage safe control keeps customers away from enexpected injury.
13. CE Certificated.
Specification
Item No. 4CMFL3.5
Lifting capacity 3500
Lifting height 1800mm
Minimum height 220mm
Overall height 2240mm
Overall length 5870mm
Width between columns 2340mm
Overall width 3220mm
Runway width 530
Lifting time ≤60s
Lowering time ＞30s
Motor 220V/380V 50Hz/60Hz 1Ph/3Ph
1. Why should I choose CNBM 4 post car lift?
There are several reasons you should strongly consider purchasing a CNBM Lift:
Top raw materials from only the finest plants
Only professional cost-effective equipment
Low prices with high quality revenue producing products
Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
The best customer service. Quick reply within 24 hours and more.
Great Warranty
2. How safe are your 2 post car lift?
Our 2&4 post lifts have been tested and CE certified for safety . They also meet the American
and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. What type of fluid is required for my 4 post car lift?
We recommend use of a SAE10 hydraulic fluid that meets an ISO 32 specification, approximately 3 gallons / 12L are required.
5. Are CNBM 4 post car lift designed for commercial use?
All of our lifts can be used in commercial applications without any problems.
6. Do you offer any custom designs?
Yes,CNBM Lift provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
- Q:Lift machine with six months, how much money, the new is 5800 yuan, now how much money to sell?
- When scrap iron sell it! Because count the freight, disassembly costs, it is better to sell scrap iron it
- Q:do you have super strength, and proved it by lifting cars?
- Well I was a bodybuilder, moved to powerlifting, moved to strongman for 3 years, took 2 years off and now I'm powerlifting again. When I was doing strongman I could roll a hatchback with the engine out. I could lift a hatch with the engine in off the ground. What you have to understand is that takes years of hard training. I really wouldn't recommend trying to lift a car unless you can and know how to do it properly. It can really damage you.
- Q:Do you buy a car lift?
- Hello, some of the package installed, you can consult with the seller, I hope my answer to your satisfaction, I wish you a happy car
- Q:i am doing this f1 in schools program and i am designing my car on the peregrine falcon please give ideas on how i should use the body parts of the the peregrine falcon on my car.
- Use the body of the bird. The car doesn't need lift. Be aware that the car moves on the road, (a plate). A lot of it's wind resistance occurs at the boundary between the car and the road. There is shear between the moving car and the static air at the road surface. If you design the front to push air sideways and upwards you cut a major source of drag.
- Q:A hydraulic lift is used to jack a 980-[kg] car 12 [cm] off the floor. The diameter of the output piston is 18 [cm] and the input force is 250 N. If the input piston moves 13 [cm] uniformly in 1.0 [s] each stroke, how high does the car moves up in each stroke?
- (980 x 9.8) 9,604N. weight (g 9.8 used). Mechanical advantage (9,604/250) 38.416:1. So if the output piston moves 12cm., the input piston must move a total of (12 x 38.416) 460.992cm. Number of strokes (460.992/13), 35.461 strokes. Distance car rises each stroke (12/35.461) 0.3384cm., or 3.384mm.
- Q:If I get a 3" body lift on my car without getting new tires will it give me any height. Because I've heard that getting a body lift is only good for adding bigger tires but wont give you any height without them. I don't get it, any additional info helps, thanks
- You wont get any height really cause the car will still be on the same tires. You'll have a little bit more height under the car but that's it. Also you have to remember there will be a pretty big ugly gap between your tires and the arch if you don't change the tire size.
- Q:Lift the price of more than 3000 and more than five thousand in the quality of what is the difference?
- Lifting machine 3000-5000 quality is not particularly good oh. As a device, or to consider the long-term cost-effective, as well as after-sales service capabilities. It is recommended to choose a professional some of the lift. China like Ai Wo Italian, Gaochang are better brands.
- Q:how to handle a car fire when we saw the accident
- allways carry a safety powder fire extinguisher.if the fire is under the hood pop the hood lever and spray the powder within the gap of the hood and the front grill. never stand at front of car and lift the hood up incase of a flash back,,
- Q:is used to lift the car?for science class (IPC) cant figure out this problem help pls?
- In a hydraulic lift, the pressure is the same for both pistons. If you go to the website below, you will see a drawing of a hydraulic lift and the equation that is used to solve this problem hyperphysics.phy-astr.gsu.edu/hba. Pressure Force ÷ Area F1 ÷ A1 F2 ÷ A2 15,000 ÷ 10 1,100 ÷ A2 A2 1,100 ÷ 1500 11/15 The area is approximately 0.733 m^2.
- Q:i just got a 89 cadillac deville and i want to get some 22"s for it so i would have to get the car lifted a couple inches. would there be a way to have the car lifted but still get an air bag suspension? also what kind of bags would you reccomend? i would want them to be able to make the wheels bounce (i know hydraulics would be better for that but i dont want hydros. oh yea i wouls also want the bags to have a fast response when i hit the switches cause ive seen some bags that take a long time to fill up and let out the air i dont want that i want it to be quick and bounce.
- First, under no circomstances will airbags make your wheels bounce, You need hydrolics to do that. And that will destroy any rims you put on the car. Airbags can fill up fairly quickly, and they can be used to raise the car, but you won't get that ghetto bounce you are talkign about. Instead of putting mopney into an old '89 Cady, save the money and get a real car to moddify.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Car Lift Manufature Automobile 4 post Lift/Car Repair
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
