An Aluminum Plate E 74 Gpa

Hot Products

FAQ

Aluminum plate and rock wool color plate which attracts the effect is good
Because the rock wool color steel rock wool can play a sound-absorbing effect.
Do you want to use the top angle of the ceiling?
You can not, but if you are European decoration, the cabinet is also a European want to look better can also be used with the top line with
Aluminum buckle ceiling ceiling area is how to count
Calculate the total area: the total length of the installation area multiplied by the total width is the area, all units in meters, the result is square meters. If it is not regular, it is necessary to divide into multiple rectangles to calculate the area, and finally add the total area.
Metal ceilings, including aluminum slabs and so on
Ceiling ceiling is mainly used for airports, railway stations, office buildings, shopping malls, subway stations and residential and other places. The market has gypsum board, mineral wool board, PVC, aluminum slab plate and soft ceilings and so on. ?? The first generation of products for the gypsum board, mineral wool board; ?? Second generation of PVC; ?? The third generation is metal ceilings.
Is the living room suitable for aluminum slabs?
As long as good-looking, environmental protection, with nothing material rules If you are home, do not recommend the living room to do Lvkou Ban, because one will reduce the high level, the second is a large area of aluminum slab board stiffness is not good, the wind has ups and downs. With gypsum board to do a few light pool, divided into several functional grid (dining area, rest area, etc.) just fine. Of course, if your living room height is big enough, another matter.
Aluminum cords and keel with the proportion of how much
Keel points are many kinds of aluminum buckle plate directly on the keel just fine, and convenient
What is the difference between metal aluminum ceilings and traditional ceilings?
Another process is different
How to remove the ceiling of the aluminum plate
1, square aluminum slab plate: with a hanging the kind of hook sucker sucked the middle of the buckle plate, and then pull down, down on the. 2, the strip of aluminum plate: wallpaper knife along the gap into the back and forth to draw a few, find the location of the clip, and then gently pry down, the first pry the middle of the pry on both sides of the easy deformation. 3, the side of the aluminum with a sucker from the edge of the pull down or with a small word screwdriver from the edge of the pry down; long buckle of the aluminum plate is required to remove from the last board and then removed; Kouban can be a small flattened screwdriver with the edge of the single piece of the pry down, you can remove a single piece of single plate.