Scissor Lift/Auto Lift/,Hot Sale Car Lift/High Quality Car Lift/Factory Price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 unit
- Supply Capability:
- 20000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Scissor Lift Feature
rigid connection of 2 platforms and synchronous steel rope make sure accuracy synchronism of 2 platforms.
Rear wheel's slide plate and front wheel's turn-table(optional) is specially suitable for wheel alignment.
2 Twice lifts movable along platforms rails.
Pneumatic duel gear self-locking system guarantee safe and easy operation.
Equipped with tool box and lamps for car service.
Suitable for wheel alignment
Specification
Item No. | CMSL3.0A |
Lifting capacity | 3000kg |
Lifting height | 2000mm |
Minimum height | 300mm |
Overall Width | 1880mm |
Length of Platform | 1550-1750mm |
Runway width | 540mm |
Lifting time | ≤75s |
Lowering time | >30s |
Motor | 220V/380V 50Hz/60Hz 1Ph/3Ph |
FAQ
1. Why should I choose CNBM scissor car lift?
There are several reasons you should strongly consider purchasing a CNBM Lift:
Top raw materials from only the finest plants
Only professional cost-effective equipment
Low prices with high quality revenue producing products
Increase productivity for your customers( Your customers gain more, they will enjoy buying from you.)
The best customer service. Quick reply within 24 hours and more.
Great Warranty
2. How safe are your scissor car lift?
Our 2&4 post lifts have been tested and CE certified for safety . They also meet the American
and Australian Standard.
3. Should I keep repair and replacement parts in stock?
Yes, most all commonly required repair and replacement parts should always keep in stock.
4. What type of fluid is required for my scissor car lift?
We recommend use of a SAE10 hydraulic fluid that meets an ISO 32 specification, approximately 3 gallons / 12L are required.
5. Are CNBM scissor car lift designed for commercial use?
All of our lifts can be used in commercial applications without any problems.
6. Do you offer any custom designs?
Yes,CNBM Lift provide OEM/ODM services to top range partners.Produce a superior product for you by your designs.
- Q: My car is a little too low to easily change the oil. I would like to lift it 3. What is the safest way? I don‘t want to be crushed. I was thinking of nailing a bunch of boards, maybe 3 of them that are 1 thick and put them under all 4 tires. Safe?I do not have jack stands but could but it. No way am I going to work under a tire jack.
- Jack it up, and then place strong, dense timbers or blocks under the chassis rails, make sure you lower off the jack and then give a good hefty 'wiggle test' to make sure the car is going NOWHERE.
- Q: I heard that its not allowed, will i have any problem using a car lift or the problem is only for the peson who is providing me Car lift? (From Sharjah to Dubai)Thanks for your advise.
- You will have no problem of course but the driver will have a fine of 5000 AED!!!
- Q: of the car.does this mean that you do less work on the car than if you had lifted the car directly?explain.can the total work done on an object during an displacement be negative?explain.if the total work is negative,can its magnitude be larger than the initial kinetic energy of the object?explain.
- No, you move the jack handle many times to raise the car inches, so the distance you exert that force is much more. With a jack with no losses, the force you exhert x the distance you move the handle equals the weight of the auto x the distance you lift it. edit: polarity of work or energy is an arbitrary thing. If you pick positive work as that done by you on an object lifting it, then the work it does falling back down would be considered negative. Me, I ignore polarity and use common sense. The work done in lifting an object to height h equals the PE it has from that height, which equals the KE it gains in falling from that height.
- Q: My passenger side tire has a nail in it. Its losing air really really slowly. I will not be able to bring it in until Tuesday and do not have a spare tire. I was going to drive another car, but could I lift the passenger side with a jack to relieve tire pressure on it? Would this be a good idea?If not please let me know what I should do so I can make it to belle tire safely on tuesday for them to patch it up for me. Helpful comments only please. Thanks!
- Not to worry, just keep an eye on it and if loose some air just refilled, you can drive for months with a nail on a tire
- Q: How long does the need to dig deeper? To warm the ground can dig?
- How to install the main heating, mainly to see you choose the equipment to install the main boiler, pipe, water separator, thermostat, auxiliary materials, artificial and other components, including boilers, water dividers, pipes and labor is a relatively high proportion Part of the artificial do not say that each place is different, labor costs are not the same, the choice of the boiler depends on what you choose the brand, how much power, different prices are not the same, the pipeline is mainly to see the brand, See you choose the brand there are materials and so on, so how much money is not to say, I suggest you find a few more local market to ask, so you can, Shure to warm free room, the program, offer
- Q: i have a 1984 cadillac eldorado and i want to lift it to be able to fit 22 or 24 rims. can someone tell me how much that lift will cost? there are 2 springs in the rear.in the front has no springs.thanks alot
- explain you said the front end of your is missing the springs?Anyways you will need 4 new springs and shocks. Not to say a new front end. alignment. If you want to spent that kind of money on a 84 consider doing it to something newer.
- Q: all around to get in and out easier. What should be done and is there any long term design effect that would hurt the car?
- If the hole isn't too big it can be plugged. You could change it out for about $12.00 if you have the tire.
- Q: I've seen the lifts that you drive up on and they have a motor to lift the car, but they are expensive, I'm looking for something that I can drive up on with all four wheels to a fixed height, kind of like driving your car up on 4 rhino ramps (which is VERY difficult on my driveway).I thought of nailing together some 6x6's and then building som kind of ramp to get the car up on them, but if I'm going to spend time under a car I'd rather use something not built from wood.
- Why do you need the whole car off the ground? just jack it up with a floor jack, and support it with jack stands. One side at a time.
- Q: this is for auto-tech..... PLEASE HELP!
- The car must always be properly balanced on the lift before the car is raised upward. If it is not properly balanced it could fall over, requiring the car to be replaced or repaired at best, resulting in injury or death at the worst. If the lift is a drive on car lift, always put a wedge behind the tire before you raise the lift. If you fail to do this, the car could roll off of the lift. Make sure that there is enough clearance before you raise the vehicle. You do not want the vehicle to hit the ceiling. This is especially important to consider when working with RVs or taller trucks. Do not lift the car all the way up when you first start. Start by lifting it up to knee height, then gently check it to make sure that the car is properly balanced. If, despite this, a vehicle begins to fall, GET OUT OF THE WAY. You aren't going to be able to stop it.
- Q: I promised my sis i would install her a new fuel pump and filter in her car. She has a 2001 grand am 6 cylinder car and i just wanna know is it hard to do and if u could can u provide steps on how to remove and replace the pump and filter
- it,s no picnic ! first take the pressure off the fuel ! you can do that by pushing the little valve on the fuel rail under the hood ! then slide a floor jack under the tank, take 1 end of both straps loose, lower the tank down far enough to reach the plug-in and the hoses, lower the tank to the ground, slide it out from under the car ! now mark the way the pump goes in and take a punch or a old screwdriver and unscrew the big 0-ring on the pump and lift the pump and sending unit out ! just make sure you get the new pump back in the same way ! now change the fuel filter ! it might have those quick connects so you might need a special tool to remove the hoses ! i have to ask you this ! how does she know it,s the pump ? it could be the pump fuse or relay if the pump is not kicking on !
Send your message to us
Scissor Lift/Auto Lift/,Hot Sale Car Lift/High Quality Car Lift/Factory Price
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 unit
- Supply Capability:
- 20000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
