ESP Connect Cable to Connect Power Cable and Electric Submersible Pump
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
The product is manufactured according to the standard of GB/T17650-2008.The product is used to connect power cable and electric submersible pump with rated voltage below 3kV for power supply.
Features:
ØRated Voltage:1.8/3~3.6/6kV
ØMin. Ambient Temperature: -40℃
ØNormal Operating Temperature:90~250℃
ØMin. bending radius is no less than 30 times of cable thickness.
Type | Name |
QYJYFTTX | Polyimide compound film sintering/PFA compound insulated fluorine plastic inner sheath stainless steel tape armored with interlock ESP flat motor lead extension cable |
QYJYEQ | Polyimide compound film sintering/EPR compound insulated lead inner sheath stainless steel tape(galvanizing steel tape) armored with interlock ESP flat motor lead extension cable |
QYJYFTQX | Polyimide F46 compound film sintering/ F46 compound insulated lead inner sheath stainless steel(galvanizing steel tape ) armored with interlock ESP flat motor lead extension cable |
Type | Sectional Area mm2 | No. of Cores |
All Types | 10-20 mm2 | 3 |
Voltage Class | Imbalance Rate of DC Resistance % | Length tolerance | DC Leakage Resistance 15.6℃Ω/km | Voltage Proof No breakdown in 5 minutes | Insulation Resistance at 20℃ |
3kV | ≦2 | 5‰ | ≦15uA/km | 27kV/5min | ≧2000 |
Specifications:
Type | No. of Cores | Nominal cross-sectional area mm² | No./Filament Diameter | DC resistance of Conductor at 20℃ | Nom. Thickness of Insulation mm | Nom. Thickness of Sheath mm | Cushion Thickness of Sheath mm | |
Armored | Oil-resistant | |||||||
3kV | 3kV | Clad | Clad | |||||
QYJYFTTX | 3 | 10 | 1/3.67 | 1.83 | 0.8 | 0.8 | 0.68 | 0.75 |
13 | 1/4.12 | 1.38 | 0.8 | 0.8 | 0.68 | 0.75 | ||
16 | 1/4.60 | 1.15 | 0.8 | 0.8 | 0.68 | 0.75 | ||
20 | 1/5.18 | 0.84 | 0.8 | 0.8 | 0.68 | 0.75 | ||
QYJYEQ QYJYFTQX | 3 | 10 | 1/3.67 | 1.83 | 0.8 | 0.8 | 0.68 | 0.75 |
13 | 1/4.12 | 1.38 | 0.8 | 0.8 | 0.68 | 0.75 | ||
16 | 1/4.60 | 1.15 | 0.8 | 0.8 | 0.68 | 0.75 | ||
20 | 1/5.16 | 0.84 | 0.8 | 0.8 | 0.68 | 0.75 |
- Q: I've heard of a new file transferring tool which transfers file through power cables and I need to know about how it worksand how does it apply the pulses or the waves to the frequency of the power cables!!
- No it is not possible to transfer the data through power cables, Ask what you actually want to do i will solve your problem.
- Q: Would a maxtor 320GB external hard drive work without a power cable if I connect it to the USB port?
- NO, YOU NEED A POWER SUPPLY
- Q: My friend I were going to play his second Xbox 360 n his living room. Went to turn it on and the RROD turned up with three lights. So we took this one and hooked it up to the cables in his room. And guess what? No RROD... So, I am lead to belive that the Xbox 360's power cable is the one that causes the RROD. Only problem is that most people can' test this due to not having a second power cable. So post your ideas about this idea. Could Microsoft be lying to us by saying that the malfunction is inside there console. I'm only 14 and i figured this out. So, how is it that no one else has??
- Nope nothing new, there are like 5 types of RROD which is why they ask you to check the ligt on the power cable. if its green then its the consle but if its red then its the power cord. it might have been Red or you might have had the 1 time only problem which i had
- Q: the contant power cables go to my car alarm, led lights, siren, power locks, power windows, and alarm bypass... they are very small thin awg wires... the ignition and constant power cables under ignition housing are alot thicker... is this possible with no problems?
- confident, you're able to do this. make beneficial each and every capability twine has its own fuse close to the battery. Addressing the different solutions: this won't drain the battery any quicker than working a single twine to a distribution block; and there isn't any might desire to characteristic a 2d battery except you intend to play the gadget for long classes without the engine working.
- Q: This is in terms of military property acocuntability.
- Yes it depends, are we talking about a power cable for a piece of radio equipment? Then yes. Are we talking about a power cable for a government computer? Then no. What I can tell you is that if it's a power cable for a piece of radio/communications equipment then its Class 9 expendable. As far as other cables, maybe you could try looking on Army Property Book or FED Log; you may have more luck there.
- Q: I have had my Sony Laptop for about 2-3years. And only recently is it acting weird.When I have my power plugged in, the laptop runs fine and can be on as long as the power cable is in. But as soon as I take my power cable out, it automatically shuts down.I checked the power management, and it says my battery has 0% power. I have tried taking the battery out and putting it back in, but it still does not work.The lights on my laptop indicate it is charging, but it does not put any power into my battery and the only way it can run is if my power cable is plugged in. The battery is pretty much dead :/Is there any solutions to this? Considering I bought it in the UK and now live in the US
- The battery is toast. You will most likely need to buy a new battery for it.
- Q: When I plug in my xbox that wire with the box on it has a red light instead of a green and ocassionally it turns yellow and my xbox wont turn on how do I fix this
- Disconnect each and everything except for the wires behind television and likewise get rid of xbox 360 confusing force and insert back connect each and everything back in position. the project must be fastened If difficulty nonetheless keeps happening then its an illustration of having a clean ability adapter(cable container) For any more desirable questions about xbox 360 be at liberty to ask
- Q: If you have an electrical device (e.g. a laptop), you'll sometimes notice that near the place where you plug the power adapter into it, there's a sign. It's composed of 3 circles, minus on the left, O inside a C in the middle, and plus on the right.What is this? And if I want to read/learn more about it where should I go?
- If you look at the jack that go inside the power input you will see that it is an outside connect and an inside one.The O is the inside connect and the C is the outside one.Because it is a DC power adapter it has a + and - polarity .O,the inside ,is the plus and C,the outside,is the minus. Also on the adapter you can see the same thing! This is because some brands use the outside connect as + and you can burn your device if you use it!!!!
- Q: im curious to know if using multiple small cables to power my amp is the same or better than using a single big one??like do three 4gauge wires give more power than one 1/0 gauge wire? or is it worse?and how do i know if my amp needs more current?? THANKS
- Running 2 seperate power cables is fine. In theory the current will split and each cable will carry the same amount of current. In reality, it will not be exact but it will be so friggin close that it doesn't matter!!! Yes you can run multiple cables, but two lengths of 4ga is going to cost you more than one length of 2ga. Unless you already have the stuff laying around, just get the larger cable. Besides, if you run two seperate cables, you will need to use some sort of distribution block to tie the two cables back together at the amp then have a conductor capable of carrying the current to your amp, or all your heavy cable doesn't mean squat. Less money will be spent in the long run by using one larger cable! As for how much current a size cable can carry: 14ga = 15A 12ga = 20A 10ga = 30A 8ga = 80A 6ga = 105A 4ga = 140A 2ga = 190A 1ga = 220A 1/0 = 260A 2/0 = 300A These wire ampacities are according to the NEC (National Electrical Code) and are set for wire to be used in any structure. The wire can actually carry more current than what I have listed, taking consideration that the wire is in an environment that it can be cooled or is in an open-air environment. If you run two 4ga wire to your amp, you have the ability to supply the amp with 280A of current (by multiplying 140 * 2). Do you need larger wire running to your amp? Only if you are having a voltage drop at your amp. The idea is to be able to supply the amp with 12V at its maximum current. If you run too small a wire to the amp, as you crank up the volume the ampacity of the wire will be maxed out and your 12V turns into something like 11,10,9... volts and your amp no longer amplifies your tunes.
- Q: my cable often gets unplugged soo im really worried that i may loose 280 dollars?
- The process of unplugging the power can cause unpredictable power spikes which can damage any component in your PC - including the graphics card. You should address the problem of your PC getting unplugged before spending more money on hardware.
Send your message to us
ESP Connect Cable to Connect Power Cable and Electric Submersible Pump
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords