Al / Cu Conductor , ACSR Control Cable,Power Cables
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LV&MV, Al/Cu Conductor, Insulation/Sheath PVC/PE/XLPE, Shield CTS/, Armour SWA/DSTA/ATA, Power/ABC/ACSR/Control/Overhead cable
Description
1. Material: Cooper, Aluminum
2. Rated voltage: low and medium voltage
3. Wire identification: Red, yellow, blue, white, black
4. No. Of cores : Single core cable: from 1.5 mm2 to 800 mm2; Multi-core cable: from 1.5 mm2 to 400 mm2
5. Standard: Low voltage: IEC60502-1 Medium voltage :IEC60502-2 or other requirement.
6. Insulation: PVC, XLPE, PE
7. Sheath:PVC, PE, XLPE
8. Armor: Galvanized steel wires armouror Galvanized steel tape armour Aluminium Tape Armour/ Aluminium Wire Armour.
9. Application: Suitable for indoor, channel, conduit,underground,vertical well etc.
10. Nominal cross section area: from 1.5 mm2 to 800 mm2.
Aerial Bundle Cable Service Drop
1. 3x35+54.6+16 3x50+54.6+16 3x70+54.6+16 3x95+70+16 3x120+70+16 3x150+70+16 mm2
2.2x16mm2 2x25mm2 2x35mm2 2x50mm2 4x16mm2 4x25mm2 4x35mm2
3. Standard: ASTM ANSI, ICEA S-76-474, NFC 33-209 or other request.
Overhead electrical stranded cable (Bare Conductor)
1.Material: 1) Aluminum stranded wire and aluminum alloy stranded wire 2) Overhead stranded galvanized steel wire 3) Aluminum clad steel
2. Type: AAC, AAAC, ACSR, ACAR.
3. Standard: AAC: GB/T 1179-2008 IEC 61089 ASTM B232 BS 215 part1, DIN 48201-5 or other requirement.
AAAC:GB/T 1179-2008, IEC 61089, ASTM B 399 BS3242, DIN 48201-6 or other request.
ACSR : GB/T 1179-2008, IEC 61089, DIN48204, ASTM B232, BS215 PART 2or other request.
4.Application: These cables most widely used aerial line in aerial electric transmission lines and main product to form a power grid.
Aerial Insulated Cable
1. Material: Aluminium, copper
2. Type: LJ, LGJ, LGJF, JL, JLHA, JL/G, JLHA/G, JL/LHA, JL/LB, JLHA/LB, JG, JLB.
3. Rated Voltage: 0./1 kV, 10kV, 35kV.
4. No. of cores: 1, 2, 3, 4, 3+k(A), 3+k(B).
5. Standard: GB/T12527 GB/T14049 or other.
6. Insulation: PVC, PE, xlpe
7. Sheath:PVC, PE, XLPE
8. Application: applying in cable fixed aerial laying or used as wire leading into user's premises.
9. Nominal cross section area: from 10 mm2 to 710mm2.
Control CableSpecification
1.Material: Cooper
2.Rated voltage: 300/500V, 450/750V, 0.6/1 kV.
3.No. Of cores : 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 19, 24, 27, 30, 37, 44, 48, 52, 61
4.Standard: GB/T9330, IEC or customers' requirement.
5.Insulation: PVC, XLPE, PE
6.Sheath:PVC, PE, XLPE
7.Armor: Steel wire, Steel tape
8.Application: Suitable for chambers, tunnels and ducts, light-current control system and heavy-current magnetic interference region etc.
Picture
- Q: my MOBO has a 4 pin connector, but my power supply came with an 8 pin power cable, so what do i do? Also my MOBO has a SATA1 slot by itself, and two SATA slots called SATA 2 and SATA 4. The SATA 1 is by itself, and SATA 2 and 4 are next to each other. so which SATA slot do i plug opticaldrive and HDD in?
- This is about power connector -
- Q: I have bought a 1.5 ton window AC from Blue Star recently and used 2.5 sq mm cable to power it through a 16A DP MCB.Can the load be supported in this scenario?
- I asked this same question 3 times, and didn't get a good answer
- Q: I just got a cheap intel i3 custom pc build on OKorder. But, i have no idea on how to set up all those PSU cables and the fans and everything else (seller thought it was a great idea to unplug every cable inside, which led to me turning on the pc assuming everything was good to go which led to the cpu overheating after turning it on) But anyway, i need to know how to setup the psu cables. My PC looks like a mess with all those cables jumbled up together. There are 4 distinct think cables sticking out from the PSU and all the other cables come from the case or the fans. Some of the cables come with numbers (1, 2, 3) and some are already plugged into the mobo, so i don't want to touch those. How to do this?
- CD/DVD drives and hard drive all use the same power connectors (multicolored), so plug them in whichever way you want. There is no specific order. Don't remove any ribbon cables, and if you wish to have a floppy drive, the power cable is slightly smaller than normal ones. Commonly, fans can be plugged in to any port on the motherboard as long as they reach without straining the cable. They can only be inserted one way and are likely three-prong so it should be easy. The numbers on your cords don't matter.
- Q: Cable WDZ-YJFE2 (4X185 + 1X95) what does it mean Cable WDZ-YJFE2 (4X185 + 1X95) What does it mean? More
- Shaft bracket spacing is not necessarily a certain, and the bridge to the thickness of the model.
- Q: Hi! I want to buy I new Hard Drive but I've got a problem. I have the IDE conector but I don't have the Power Cable. It is connected to my Video Card. Can I add a new one? Can I use a power cable from a optical drive(CD/DVD)? Thanks!
- All you need to do is pop down to your local computer store and get a power splitter, just make sure you get the right type, IDE and SATA drives have a different kind of power connector, so just make 100% sure before you buy!
- Q: Can anyone tell me the best place to run the power cable for my amp from the battery through the firewall? (2000 Chevy Impala)
- Look for where the factory wire harness goes through. there's usually enough room to cut or drill a whole and pass your power wire through. If not, you'll have to make your own hole in a safe place.
- Q: I am currently travelling in Europe and my power cable crapped out. I need a website which offers next-day international shipping. I am currently in Prague and am going to Krakow next; so if you know of a store in either city which would save me the shipping costs, that works, too.
- OKorder
- Q: on the end of the cable that connects to the laptop not the power outlet
- It's a ferrite bead, used to filter electrical noise on the cable before it enters your laptop.
- Q: Help in English:do these expressions have exactly the same meaning?
- There is some overlap, but, as Eric says, a cable is usually thicker than a cord. There is an interesting saying in German that contrasts the two ideas. Lange Leitung ... kurzer Draht. English isn't so specific.
- Q: my sub came loose and started sliding around in my boot until the power cable got ripped out of the amp while i was driving at it was on. When i tried putting the power back in it just blew the fuses, so i bought some more, and they blew as soon as they went in as well, and one of the bits of metal melted putting one it! strathfield said its 45 for an inspection, plus the cost of fixing it. any ideas whats wrong with it and if i can fix it myself??cheers.
- You can repair this if you already know what you are doing. Each wire in the cable terminates on a specific terminal. (A power cable can be expected to have 2 wires, a red and a black for pos12v and neg12v respectively. Reverse these wires even for a moment and wave your amp goodbye, unless there is protection built in if you're lucky) So ... Do you know all the repair proceedures? Do you know what wire belongs to what terminal? (No trial and error allowed here) If you have any doubt about doing this right first time then you are unable to fix it your self, and it would be better to take it to the experts and pay for repair.
Send your message to us
Al / Cu Conductor , ACSR Control Cable,Power Cables
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 20000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
