Wide Mouth PET Preform Mould Smart Cheap High Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Wide Mouth PET Preform Mould Smart Cheap High Quality
Mould Manufacturing has the Knowledge, experience and facilities to make your molds qualified at every making process. We work close with you through all phases of the whole process to make sure all issues are addressed properly, from project estimation, part function and design, steel material selection, mold layout and design, and mold making process, and cost analysis factors. Etc.
pet mould making
TESM specialzies in mold making for:
Auto parts plastic injection mold making
Medicinal parts mold making
Home appliance part mold making
Industry parts mold making
From small size to big size mold over 2000mm, from simple to complex mold such as auto heater part mold. As so many big and small precise facilities in house, so we are able to provide you good quality with reasonable price, and fast deliver time, and our professional project team will keep you good service always.
Our Services
1. Can supply with both Mold & Molded parts
2. Provide Milled Prototype Making, Mold Design, Mold Making, Mold Testing, Molding, Products assembly...services
3. With more than 25 years experience, all of works are done 100% in our factory in Taiwan!
4. Low volumes / Small orders are welcome! Please contact us to discuss case by case.
5. Accept only OEM / ODM / Customer Projects. We do not have any existing molds for sell.
6. Mold building lead time: Around 40-50 days, with 1st Mold trialing report and Mold trailing samples
Product Description
Plastic materials: | PS, ABS, PP, PVC, PMMA, PBT, PC, POM, PA66, PBT+GF30%...etc. |
Other materials: | Rubber, Silicone rubber, LSR, aluminum, zinc...Metal...etc. |
Quality: | ROSH and SGS standard |
Feature: | Non marking and Non flash |
Size: | According to your drawing |
Color, Quantity, Unit price, Tooling cost, Tooling size: | To be discussed |
Mold structure: | Injection Mould, Plastic Mold, Overmould, 2k mould, Die-Casting Mould, Thermoset Mold, Stack Mold, Interchangeable Mold, Collapsible Core Mold, Die Sets, Compression Mold, Cold runner system LSR Mold,…etc. |
Mould Base: | HASCO standard, European standard, World standard |
Mould Base Material: | LKM, FUTA, HASCO, DME, etc. or as per customer’s requirement. |
Surface Finish: | Texture (MT standard), high gloss polishing |
Finish: | Mirror finish etc. |
Cavity / Core steel: | P20, 2311, H13, 2344, Starvax 420, 236, AdC3, S136, 2312, 2379, 2316, 2083, Nak80, 2767 etc. |
Cavity: | Single cavity, Muti Cavity, based on customer’s requirement. |
Hot / Cold Runner: | HUSKY, INCOE, YUDO, HASCO, DME, MoldMaster, Masterflow, Mastip, Taiwan made brand…etc. |
Mould Life: | 1,000 to 1,000,000 shots (according to your working environment) |
Design & Program Softwares: | CAD, CAM, CAE, Pro-E, Solid works…etc. |
Equipments: | High speed CNC, standard CNC, EDM, Wire Cutting, Grinder, Plastic Injection Molding Machine for testing mold from 50-3000T available. |
Package: | Standard exported wooden box packed, fumigation process (upon required) |
Mold building lead time: | T1, 40~50 days, parts measurement report (upon required). |
Annual production: | 250 sets of mold |
- Q: Is the digital control the same as the mold? If not, what's the difference?
- Han of course is different numerical control is a method, the mold is a kind of thing
- Q: How is the die in the manufacturing industry
- If you are a production company, you can buy it as a tool and sell it as a material sale. Purchase: low value consumables - molds Taxes should be paid in the form of VAT Bank deposits (or accounts payable) Sales: bank deposits (or accounts receivable) Other business income - material sales Tax payable - value-added tax Cost of transfer: other business costs Low value of the loan - molds Welcome to use the "fiscal and tax question-and-answer community" for financial advice
- Q: What is the difference between a large water inlet and a thin nozzle?
- Simply put, the large water mouth is a two-plate mold, and the water port is three plates. Simply say: the big water mouth is two plate molds, the small water mouth is three plank model, two is only the difference one scraper board. The thin water mouth is: more than a big water mouth to push a board. 9, the sex limited gate (gate) : advantage: fast filling, pressure is small, feeding capability is strong, suitable for high viscosity, illiquid plastic, less pressure loss. Disadvantages: sealing water the long, slow cycles, internal stress, Influence on the plastic parts is big, difficult to remove. Restrictive gate (gate) : advantage: shear, friction, viscosity, easy filling, texture clear fast cycle efficiency, reduce internal stress, prevent deformation, less influence on product
- Q: How does the die rod work? Is it through the press?
- The rigid push device usually consists of a rod, push plate, connecting rod and push piece.
- Q: What is the discharge in the die
- The principle of discharge machining is clear. I want to add: Electro discharge machining general use mould has more complex parts or features, other processing method will not be able to process the part, such as too small fillet and so on characteristics, due to other processing way knife can't reach, it is thought that if we do a bullnose matching, we put the bullnose electrode, electric spark processing parts of the corrosion products, finished products are formed a fillet in contrast to the electrode. This kind of processing is relatively slow, cost relatively high, commonly used for more precise die processing.
- Q: How do you handle the die holder
- Mould run burrs this directly associated with the precision of the mould processing 1: CNC processing aspect: parting surface machining with rubber products separately, do protect with mold clamp mouth out at the same time, avoid direct cause in the process of machining die round 2: split electrode aspects: faceted clear Angle of electrode to product rubber electrode, separately die fillet in the EDM process can be avoided
- Q: Is there any way to keep the ice from sticking to the mold and remove it from the mold
- The best way is normal with mold, ice, frozen after good, put the mold in bowl with cold water for a while is ok, it is not necessary to use warm water, don't have to put the water into ice. And then you take it, and then you have a twist on both ends of the mold.
- Q: What is the relation between the mould and the clamp
- The mould and fixture are usually mutually reinforcing. A fixture can also be called a mold. But the mold is not necessarily a fixture. 2. For example, a fixture can be a simple auxiliary tool. Play a fixed role. But the molds, perhaps, are shaping molds, which means cutting. Some of the molds are made of cakes, made of molds, put the cream in, and come out in a shape. 3. The fixture is usually cheap, it doesn't need much money, it can be simple, it can be complicated. 4. The mold is generally more complex, relatively speaking.
- Q: What is the difference between the mold and the numerical control? The difference is?
- The design process of the tool and the performance of the materials needed are designed CNC is mainly for nc machine tools, need programming digital controlled drawing mould, in short, the mould is used for molding tool, this tool has all parts, different mould made up of different parts. It mainly USES the physical state of the forming material to realize the processing of the physical appearance. The mold can be divided into metal mould and non-metallic mould according to the material that is formed. The metal mould is divided into: casting mould (non-ferrous metal casting, steel casting) and forging die etc. Non-metallic mold is also divided into: plastic mould and inorganic non-metallic mould. And according to the material of the mould itself, the mold can be divided into: sand mold, metal mould, vacuum mold, paraffin mold and so on. With the rapid development of polymer plastics, plastic mould is closely related to people's life. Plastic mould can be divided into: injection molding mold, extrusion molding mold, gas auxiliary molding mould and so on.
- Q: The wall thickness of the die is affected by the plastic parts
- For thermoplastic materials, the cooling time is added For thermosetting materials, solidification is not complete.
Send your message to us
Wide Mouth PET Preform Mould Smart Cheap High Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
