Roofing Insulation Materials:Flexible Ducts Infu Mylar Insulation
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 234 g/m
- Supply Capability:
- 234 g/m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Product Material
10m length aluminum insulation ventilation duct with low priceis made of aluminum foil +fiberglass+aluminum foi+steel wire
Product Feature
8 inch insulated flexible aluminum air duct heating and cooling systems following feature:
1.Size. (Customer's color requirement can be matched)
2.Color. (Customer's color can be fulfilled )
3.Non-toxic .Harmless to people even long time exposure
4.Excellent light transmission. transparent rate above 92%
5.Excellent weather resistance. performance can’t be change easily by Sunlight and Rain
6.Excellent Design.Personalized design and Human design with mordent concept
Product Advantages
8 inch insulated flexible aluminum air duct heating and cooling systems following advantages:
1.Material .environmentally friendly Acrylic
2.High Ruggedness.hard to attrit ,break and damage
3.Good anti-aging Properties .Long Using life Above 5 years
4.Strong Impact resistance .16 times than that of ordinary glass
5.Logo imprinting .Customer's Logo can be imprinted personally
6.OEM.ODM service. Satisfied related service can be offered in short time
7.Competitive price.Price at various level can cater your various requirement
8.Reasonable Delivery time.Fast to arrive at your office By air or Sea
9.Sample .Sample available for your proof and final decision
10.Trial Order are hotly welcome and allowed
- Q:I am in the process of having a new roof installed. What are my options in regards to improving its' insulating properties?
- I’m guessing you are asking about the attic. Spray cellulose insulation is the way to go. Very green with 80% or more of the product made from recycled paper. Wet or dry depending on the need, with some system allowing for a DIY application.
- Q:Finally remembering to do so, before my family and I left the house for approximately 4 hours, I turned off the heat before leaving. When we came home I turned it back on, but was shocked to see that the temperature had dropped 4 degrees in that time. 4 degrees in just under 4 hours seems like a lot of heat loss, does it not? I've seen the insulation in our roof and it's just that sawdust looking stuff spread everywhere. I feel like I'm paying a lot of unnecessary dollars for heating: the air does kick on every hour or two and we keep the thermostat at 68.Is it reasonable for me to talk to my landlord about this problem and getting better insulation in the ceiling, and maybe in the roof? (the master bedroom, on the far corner of the house, is always 2-3 degrees below the rest of the house). Are my expectations to not lose a degree of heat or more per hour unreasonable? Would a typical landlord consider this a problem worth discussing?
- You can ask and I'm sure the landlord would be happy to have more insulation installed at your expense. There are many factors which contribute to heat loss including how much thermal mass in the home (furnishings, etc.) and how well it absorbs heat, the type of flooring, how well your basement/crawl space is insulated, cold leaks through windows and doors, chimneys, and so on. Then there is the outside ambient temperature to factor in. Personally, I think 4 degrees in 4 hours is very little heat loss. But, that would depend upon what the outside temperature was. Added: The far bedroom is probably the furthest from your heating source. If you have hot water radiant heat and a basement that won't freeze during the toughest times, you can insulate the heating pipes if not already done. Wrapping with newspaper is a cost-effective way of doing it and since the pipe will never get to 451F, there is no danger of it igniting. However, no matter what, the furthest away from the heat source is going to be the coldest. If "far corner" is N, NE, W NW, those are the coldest spots on a house during winter due to lack of sunlight. Here's a tip from my serviceman -- don't turn your furnace too low during the night. There is a break-even point where the energy used to heat up the environment is equal to the energy saved by keeping it at a lower temperature. The range is about 8 degrees on average, but that's here in the NE. This bore out very well last year during a bitterly cold winter that started in October and went well into May when I kept the heat "cranked up" higher at night. I used less fuel than I did the year before, which only had 6 months of normal winter. I used to turn it down to 55 at night, but I turned it down to 62 from 70. I was seriously overdoing it thinking I was doing me and the environment a favor :)
- Q:We have plenty down at the center, so many, you can carpet a garden. So, since I'll have to tear down the roof and improve the insulation in a few months, I was thinking of adding one extra layer... of emergency blankets. Since they can reflect the sun's heat up, and the heat under it down, will they do that for a whole house? Will the plastic film cause water condensation? If you wouldn't recommend it, then what would you recommend?
- They may help, but as thin as they are, installing them would be about as easy as putting socks on a rooster!
- Q:1) What thickness of rigid insulation is used on flat roofs?
- 2" is what I always use.
- Q:I have read in some articles about roofing that it is recommended to use attic roof insulation in ones roofing. Is this true?
- here in the uk not only is it necessary ..its the law ..under building control up to 250mm 10" of fibreglass is needed ...it keeps house warm in winter and cool in summer
- Q:My new room is an addition to a mobile home, and has a single-layer metal roof. I have 3 "main" concerns. What are the cheapest and/or most effective ways of eliminating them?1. No heat insulation- cold air sinks from the roof to my room, and my warm air rises to the roof and cools.2. Condensation forms on the inside and drips occasionally. My computer, bike, and downhill boards are in here!3. It seems like bugs could easily get into my room, but that's just a suspicion.
- You really need a correct "building paper" under the iron. It is aluminum with a tar sandwiched between...You can also use plastic sheeting as a vapor barrier..
- Q:Live in Houston, very hot and humid. Looking at adding radiant and additional insulation to roof in house. We have a lot of sun, and AC bills.
- I think you'll get more bang for you buck just going with the radiant barrier and having a continuous ridge vent.
- Q:The distance between knee wall and attic ceiling is about 6 foot. Could I push a perforated pipe between the rafters?
- That is an option. And there aren't many options.Not much is going to slide easily behind the insulation. I'm thinking --------------------. You are undoubtedly going to snag on roof nails coming through the decking. I don't know if they would hold up but the cardboard tubes wrapping paper comes on might work if you tape 2 together. and flatten and tape the end you will be pushing in first. cut slots with utility knife. I think your idea would work if you can afford the pipe. That's a tough one. When we convert attics we line those cavities with a styrofoam insulation chute end to end until we reach open ventilation-you probably know that by now. Give it a try.
- Q:Like how does it get put in your roof?I am doing this energy efficient house.Other Questions:What is an Eave?Whats the roof on top of a patio called?What does orientation mean?What are the good things about French doors?
- go into your attic and pull the insulation out from around the vents that you have the problem with. Then take some standard insulation and fill in around the vents.
- Q:What are the roof insulation materials?
- Compared with EPS sheet, XPS board is made of polystyrene resin and other additives by extrusion process has a continuous uniform surface and closed-cell honeycomb structure of the plate, the closed-cell structure of the insulation material can have different The pressure (150-500Kpa) also has the same low thermal conductivity
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Roofing Insulation Materials:Flexible Ducts Infu Mylar Insulation
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 234 g/m
- Supply Capability:
- 234 g/m/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
New products
Hot products
Hot Searches
Related keywords
