Polyester Fiberglass Geotextile Roofing Tissue
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m²
- Supply Capability:
- 280000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The structure of Polyester Fiberglass Geotextile fiberglass roofing tissue discriptions:
Geotextiles and related products have many applications and currently support many civil engineering applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection, coastal engineering and construction site silt fences or geotube. Usually geotextiles are placed at the tension surface to strengthen the soil. Geotextiles are also used for sand dune armoring to protect upland coastal property from storm surge, wave action and flooding. A large sand-filled container (SFC) within the dune system prevents storm erosion from proceeding beyond the SFC. Using a sloped unit rather than a single tube eliminates damaging scour.
Erosion control manuals comment on the effectiveness of sloped, stepped shapes in mitigating shoreline erosion damage from storms. Geotextile sand-filled units provide a "soft" armoring solution for upland property protection. Geotextiles are used as matting to stabilize flow in stream channels and swales.[3][4]
Geotextiles can improve soil strength at a lower cost than conventional soil nailing.[citation needed] In addition, geotextiles allow planting on steep slopes, further securing the slope.
It 's a new composite fiberglass cracking-resistant material, made of fiber glass and PET fiber by
Special process.
Specification of Polyester Fiberglass Geotextile fiberglass roofing tissue:
Tensile strength: 5kN/m - 8kN/m
Features or Property of Polyester Fiberglass Geotextile fiberglass roofing tissue:
I. Delaying the reflective crack
2. Provide super waterproof layer
3. Could be completely crushed and used for road regeneration
4. No shrink. Fiberglass geotextile has the ability of no deformation and no shrink under high
Temperature construction environment
5. No stretch. Fiberglass geotextile does not stretch deformation during installation prog ress
Application of Polyester Fiberglass Geotextile fiberglass roofing tissue:
I. Cement concrete pavement reconstruction
2. Old road reconstruction and extension project
3. Asphalt concrete surface
4. Municipal road engineering with cover project
5. Semi-rigid base shrinkage crack disposal
6. Bridge deck waterproof layer
Area |
|
Hydraulic | Lagooning and Water Treatment, Ornamental Ponds, Golf Courses Aquaculture and Desalination Water LagoonsTanks, Reservoirs, Liquid WasteFloating Cover SolutionsDrainage and FiltrationShading Cover Solutions |
Environment | Tailing ponds, Leach mining,Landfills,Landfill Capping,Protection against corrosion,Vertical Barriers |
Civil Works | Erosion Control, Secondary Containment, Tunnels,Linear and Surface Works,Consolidation of Margins,Soil Reinforcement,Soil Separation. |
Building | Parkings,Roofing,Soundproofing building |
- Q:Find the construction steps for waterproof coatings
- 2, waterproof layer construction sequence and methods (1) base surface treatment and acceptance of qualified, and now Yin, Yang angle and construction joints and other special parts brushing waterproof coating layer, strengthen the layer 1 mm, strengthen the layer after brushing, immediately paste fiberglass cloth or 30 ~ 40g / ㎡ polyester cloth reinforcement layer, is strictly prohibited to strengthen the surface layer and then paste the reinforcement layer material. (2) to strengthen the layer of hard work, began to brush a large waterproof layer, waterproof layer using multi-channel (3 to 5) brushing, brushing the upper and lower coating should be perpendicular to each other. When the surface of the coating is completely cured (not sticky hands) before the next curtain coating construction. (3) polyurethane coating waterproofing layer after the completion of the experience of acceptance, the timely application of the waterproof layer of the protective layer, the plane protective layer with 7 cm thick fine stone ㎝, in the pouring of fine stone before the need to cover the waterproof layer A layer of 350 # paper tire linoleum insulation layer. Facade waterproof layer (such as anti-beam facade) with a thick 6 mm polyethylene foam protection (expansion ratio of not more than 25 times).
- Q:Roof leakage, what materials do the best waterproof
- hird, for some of the city building cover the construction of red tiles leakage, as long as the removal of tiles on the grass, moss or dust after the replacement of tiles, leak-proof effect is the same. For flat roofs, the roof of the obvious cracks, with the tool will be cracked into a "V" or "U" shape, filling the caulking ointment, filled with cracks and above the use of waterproof wrap around the package. To strengthen the leak-proof effect, you can also shop a layer of waterproofing membrane. Note: Before the waterproofing and draining construction, the roof must be dry, because the roof of the water does not evaporate, the new waterproof layer will rise, the waterproof effect immediately invalid.
- Q:Slope roof drains do not need to be waterproof
- In addition, according to conventional settings vertical and horizontal sub-grid, complex structure easy to leak.
- Q:FRP finished brush on what can be waterproof do not fade
- FRP appearance is the use of gel coat, we do the appearance of glass steel yacht are gel coat, also known as plastic shell, resin gel coat, etc., the color can be customized in the factory, Nanjing DSM company there.
- Q:What material is used for waterproofing of tarpaulin
- Cement-based waterproof paste (such as the Swiss Sika) Product category Cement-based materials non-toxic, environmentally friendly, both in the construction process also Is formed after the harmless to humans and animals.
- Q:What should you pay attention to before the construction of the basement waterproofing membrane?
- 2, the mold of the nail set: in accordance with the pre-scheduled area along the painted bottom line nail with polyethylene film wrapped wood mold. Mold to be flat, with the basic nail implementation, to prevent leakage material.
- Q:What is the price of a waterproof window cover?
- The benefits of window sets (1) the most important role of the window cover is to protect the role of the window. Because long-term use is easy to make the window side of the phenomenon of damage, and window cover made of wood, can play a good anti-collision protection. (2) the design of the window cover to a certain extent also played with the door sets, baseboard echoes the effect, because they are with the whole space, the common bear the role of income side. (3) window cover is the form of the windowsill match, we shop a piece of marble and the like things on the windowsill, often feel more monotonous and abrupt. Plus hood, the feeling will be more complete. Window cover style features: window cover and the door is echoes, in general, if the door is no door sets, then the window does not need window sets; the other hand, if there is no door sets and no window cover, there is a no completed The feeling that, in most cases, the requirements of the style of the window cover and the same door uniform.
- Q:Js waterproof coating without powder can brushing
- 4. Coating protection: JS waterproof coating after the end of the construction, not thoroughly dry before the need to protect the coating, including the suppression of pedestrians, rain erosion, exposure, sharp damage to objects; thoroughly dry solid JS cement Emulsion coating does not need to do other protective layer;
- Q:What are the key points and contents of the quality control of waterproof material?
- 3, infiltration of crystalline cement-based waterproof coating: on-site fraud is to use ordinary cement mixed with seafood powder (or 801 glue) so that the cement after the solidification of the color, it will not crack. Genuine infiltration of crystalline cement-based waterproof coating will have a hydrophobic effect that is the effect of lotus leaf water droplets (of course, this hydrophobic effect can not be too much, otherwise it will affect the next process of bonding).
- Q:Roof for the insulation, Master roof, using two waterproof construction program
- Third, security measures 1, firmly establish the "safety first, prevention first" safety production policy. Before the operation, the site management personnel must be to the operation team to carry out security technology to the end, and actively carry out pre-class security activities, security personnel check, supervise. 2, the roof around the poles outside the scaffolding (protective railings), roof construction is strictly prohibited removal. 3, roof construction, debris and other materials is strictly prohibited from the roof directly down throwing. 4, storage of coils and adhesives warehouse or site to prohibit the fireworks, for the use of fire, there must be fire prevention measures, and should set a certain number of fire extinguishers and sand bags. 5, oil drums should be flat, not two carrying, in the transport process, pay attention to balance, the spirit to focus, to prevent accidental fall caused harm. 6, transported to the roof of the material, should be scattered on average, with the use of transport, not concentrated stacking. 7, the use of torch, you should clear the surrounding flammable items, must be away from the base of oil, is strictly prohibited in the brush base oil area using the torch. Torch petrol should not be over full, cheer should not be too much, in the fire site must be equipped with fire equipment.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Polyester Fiberglass Geotextile Roofing Tissue
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m²
- Supply Capability:
- 280000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
