Micro Usb Cable,Usb Data Cable,Retractable Micro Usb Cable
- Ref Price:
-
$0.10 - 2.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 18000 Piece/Pieces per Week pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
micro usb cable,usb data cable,retractable micro usb cable
| usb cable Features | USB3.0 | USB2.0 |
| Data Rate | SuperSpeed (5.0Gbps) additional | low-Speed (1.5Mbps) |
| full-Speed (12Mbps) | ||
| high-Speed (480Mbps) | ||
| Data Signal | SS OUT Differential Signal: 1 Pair | Differential Signal: 1 Pair |
| SS IN Differential Signal: 1 Pair additional | ||
| Connector Signals | 4 wires: SuperSpeed | 2 wires: DP/DM for USB 2.0 |
| 2 wires: DP/DM for USB 2.0 | 2 wires: Vbus/GND | |
| 3 wires: Vbus/GNDx2 | ||
| Bus Protocol | No polling | Uses polling |
| Power Control | Configuration at multiple link levels | Suspend/Resume by Port |
| Power Supply to Bus | Max. 900 mA | Max. 500 mA |
USB cable Electrical:
| 100% open & short test | ||
| Voltage : 300V DC, 5MΩ/10ms | ||
| Insulation Resistance: 10M OHM /300V Min. | ||
| Contact Resistance: 0.01 OHM Max. | ||
| Shield up to 65% braid. | ||
| Working Temperature: -25 ° ~ +80 ° |
USB cable Mechanical:
| Over mold: PVC 70Pa UL94V-0 |
| Pre mold: PE Low Density |
| Contact: Copper Alloy. |
| Insertion Force: 35 N Max. |
| Withdraw Force: 10 N Min |
Shipping Information:
We guarantee to ship out within five to seven days after the confirmation of your payment.(Except Holiday).
In order to ensure you receive your order tax free upon import, we will declare small sample order as a 'GIFT' with a lower value.
This lower price does not reflect the total price you paid or the market value of the product. And it may not apply to countries with different tariff rules. Any import charges or fees are the buyer's responsibility.
Delivery time is approximately15 to 20 working days (excluding Saturday & Sunday, Public Holiday) to most destinations.
We are not responsible for any accidents, delays or other issue aroused by the shipping service.For item's safety, insurance is highly recommended.
Please confirm and make sure the shipping address is correct. We are not responsible for any wrong or undeliverable addresses.
After-sale service:
1) Our slogan is "keeping in touch with our customers with parts of quality and benefiting our customers with best service";
2) Our promise, so long as product quality has question, upon test and find out if they are our fault, we can exchange or resupply to you for free with my company connection.
Why choose Topcables?
1.We have seven years manufactory experience in cables for computer and all kinds of mobilephone and industry demanding.
2.OEM/ODM available
3.Steady product quality
4.Strict quality control
5.We have stong design team which can accept any orders about custom modular cables for industry
6.Quick delivery time
Remark:
1) We can make sample production according to your drawings and specifications, so please feel free to contact us for samples.
2) If possible, please provide us a drawing or specification table for any product so that we can greatly improve our work efficiency and save your time and energy.
3) OEM Available
4) Don't hesitate to contact us for any questions of your concern
Why we choose Okorder.com?
Okorder.com is a professional and reliable online E-market place
Providing a variety of products with reasonable prices
High quality goods provided by factory suppliers
Shipping to over 200 countries.
One-stop sourcing
Dubai Logistic Complex
Okorder Quality Control?
We hold a very strict quality control system to check every connector of our products for your safety.
Okorder services for you
1.7*24 hours Hotline & Email Service
2. Your inquiry related to our products or prices will be replied in 24hrs.
3. Well-trained and experienced staffs to answer all your enquires in fluent English
4. OEM&ODM, any your customized demand we can help you to design and put into product.
5. Distributor ship are offered for your unique design and some our current models
- Q: Power cable ZRYJV-4x70 + 1x35 What does it mean? Can you explain it?
- 51 laying of cables 511 cable laying should meet the following requirements: 1 cable type, specifications should be consistent with the design requirements
- Q: all my cables are pluged in but i have no power to printer lexmarkz43
- Make sure all the power cable connections are tight first. Often where the power cable connects to the back of the printer, the cable can come loose. If all connections are tight, your power cable could possibly be bad, but as well so could the power supply of your printer.
- Q: I'm only asking this on here out of interest, this is not homework. I want to know how to calculate exact distances between to poles connected at the top by a cable. The length or height of the objects are not important to me, but if you must use an example please do so. So I want to know what formulas to use, what variables in those formulas mean, and how the slope of the cable will affect the distance. For example, if two poles have a distance between them of 0, and the cable extends 100, it would not mean that the drop of the cable (called a catenary?) would be 50, (it's misleading because you would think that since the distance between the two poles is 0, the cable would drop 50 and rise 50. But this is not taking into account the slope it has to take at the bottom of the catenary. It must lose some drop (perhaps to 48 or 49) in order to bend and rise back up...I want this out of my head, it's bugging me that I can't figure it out.
- No sign can commute faster than the fee of sunshine (neglecting tachyons, that have in no way been pronounced interior the genuine international, yet in concept can in no way slow all the way down to or commute under the fee of sunshine). The ropes and poles could flex because of the fact the sign traveled alongside them. because of the fact that they'd not flow right this moment, the sign could commute at a speed nicely under c. right that's a version on the pole concept. think you have 2 very long poles crossed at an attitude. The poles are rotating from their crossed orientation to alter into extra parallel. the factor P the place the poles bypass will commute down the poles as they attitude parallel, shifting faster and faster. Can the action of P exceed the fee of sunshine? particular it could! P would not have any actual manifestation and for this reason no mass; for this reason its action isn't constrained with the aid of relativity. in spite of the undeniable fact that, if P did have mass -- as an occasion, if there became a hoop around the crossing factor -- then the poles could be compelled to flex because of the fact the relativistically increasing mass drew further and further ability from them. * To Michael under: Einstein's particular concept of Relativity states that it could consume an limitless quantity of ability to strengthen up any particle with mass to the fee of sunshine. So that is impossible to strengthen up even an electron to the fee of sunshine, regardless of the certainty that scientists can get very very close now. Photons have not have been given any mass so as that they commute on the fee of sunshine and easily on the fee of sunshine (and is the reason why every person measures an identical fee for c). Tachyons have an 'imaginary' mass (a dissimilar of the sq. root of -a million) and so as that they can't commute as slow or slower than mild... merely faster!
- Q: Just wondering if the eVGA GT 440 graphics/video card needs a power cable connect from the psu to it.I bought a PC pre-made from JB HI-FI and going to upgrade my graphics card. The one I have currently is the Radeon HD 4650 and it appears to have no cable connecting to it. There are however, some cables connecting to the motherboard near it.
- No, it doesn't need one, but it's also a crappy purchase. The Radeon 6670 costs about the same, doesn't require external power, and slaps the GT 440 silly.
- Q: Basically, I lost my power adapter to my monitor, and to be honest, I would like to try to avoid buying a new one entirely. I have an old HP laptop power cord that fits into my monitor, but the power specifications on it are different. The power rating on my monitor is 19V and 1.58A. I'm just assuming that's what it needs to run, and that you shouldn't go over that. My power supply from my old laptop converts standard AC into DC at 18.5V, which I'm assuming the difference in voltage between 19 and 18.5 won't really affect anything, but the amperage on my power supply is close to twice as high, at 3.5A output. That's where my concern is, if I where to plug this into my monitor would anything bad potentially come out of it? Don't comment saying quot;Oh, just buy a new one.quot;, I've stated I want to try and avoid that. Thanks in advance.
- 1. Make sure the volts are close enough. Within 10% is probably good enough. 2. Make sure the amps the supply is capable of, meets or exceeds the amps the monitor requires. The power supply won't push extra amps if they aren't called for. Use my advice at your own risk.
- Q: What are the advantages and disadvantages of separating 28Vdc, 200A positive power cables and returns into two different harnesses?
- WHAT ARE YOU TALKING ABOUT ? ALL DC POWER SOURCE REQUIRES TWO SEPARATED CABLES .
- Q: I got a free graphics card from my cousin and my computer only has the SATA slots for graphic cards and the one he gave me has the 4 Pin cable. Is there anyway to get it converted or any cables that can go from 4 Pin to sata? I wanna see how this graphics card goes when its working fully.
- Check okorder ... I was flat out unable to find a SATA to 6-pin cable. To put it bluntly, I'm surprised the card works at all without that addition power line.
- Q: Whilst mowing the grass, I cut through the power cable, which was connected straight into the wall and not an adapter, which it usually is. I'm fine, how comes? The mower is a flymo bought last year.
- If you do not have an RCD cut out and were holding the plastic grip you were lucky, they are designed for this event but I always plug into a trip switch.
- Q: Only the ground cable is green, the two other cables are gray and I noticed that one is with stripes the other is not... The maker is Smart Choice. - there is more clue, one cable end is coded with a letter Z , other W , than G .... the G is probably the ground ( green ) . I need to know which one will connect to the black wire and which to the white one. Please help. Thank you
- The neutral or grounded conductor will be the one with the stripe or ridge on it. This will connect to the white wire or neutral connection on the dishwasher. You can follow it down and see that it will be the wider of the two power prongs. Green or bare will be for equipment grounding and will connect to the frame of the dishwasher. Usually this is a green screw.
- Q: when the power cable comes out, the laptop turns off simple as that! it wont work unless the power cable is plugged in and turned on, and its not that the battery is flat because i had it charging all day.so does this mean the battery is broken?if so what do i need to do?? any help will be greatly appreciated!!
- Recharge the battery without using the computer at the same time. If this doesn't work you need a new battery and, obviously, someone to do the technical work. Try the geek squad at CircuitCity. It may cost you a little bit but they should be able to fix it or tell you if there is anything else that can be done.
Send your message to us
Micro Usb Cable,Usb Data Cable,Retractable Micro Usb Cable
- Ref Price:
-
$0.10 - 2.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 18000 Piece/Pieces per Week pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
