Laminate Flooring 8mm Export to Europe HDF Material
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
Laminate flooring is a multi-layer synthetic flooring product, fused together with a laminationprocess. Laminate flooring ismost often four layers of materials，From topto bottom is Durable Overlay, Decorative Paper, HDF board, Balance Paper.
Durable Overlay is made by applying an AL2O3 solution over transparent paper, AL2O3 is very fineand thus it does not hide the color and design of the decorative paper.
Decorative Paperis a computer made paper which imitates natural wood, stone etc, by applying AL2O3to decorative paper, the latter becomes protected from the environment.
HDF board are made of wood fiber compressed into a high density panel (≥880kgs/m3).
Balance Paper is the thick and strong paper treated with AL2O3 on the back of laminate flooring,it gives stability to the laminate flooring boards and provide a measure ofisolation from under-floor humidity.
Wear Rating:
Durable Overlay Thickness | Applying Place | Euro Grade | EN438 | EN13329 | China National Stand |
22g／m2 | 21 Family Low Grade | AC1 | 2000 | ≥600 | 1500 |
33g／m2 | 22 Family Medium Grade | AC2 | 4000 | ≥900 | 2500 |
39g／m2 | 23 Family High Grade | AC3 | 6000 | ≥1800 | 4000 |
45g／m2 | 31 Commercial Low Grade | AC3 | 9000 | ≥2500 | 6000 |
62g／m2 | 32 Commercial Medium Grade | AC4 | 12000 | ≥4000 | 9000 |
76g／m2 | 33 Commercial High Grade | AC5 | 15000 | ≥6500 | 12000 |
Formaldehyde Emission：E1
Moisture Content：≤12%
Surface: Mirror, Middle Emboss, Fine Emboss, Crystal, Hand Scraped
Specification:
Thickness: 7.3mm,8.3mm, 12.3mm, 15.3mm
Based on order, other specification are alsoavailable.
Packing: 8-10 pieces per carton, 35-60 cartons perpallet, about 20 pallets per container.
- Q: How does the floor stand up?
- Compound floor tilt solution: First, the tilt of the floor all removed, and then clean the bottom of the brick, after the floor can be put up. Second, to find a cutting machine, the tilt of the floor cut the seam, pay attention to cut just tilted, or can not cut, the tilt of the floor are set off, the following sweep clean, each floor are cast on the floor glue And then stick on it. Third, the floor tilt and burst, usually in the rapid changes in temperature drops of cold or heat occurred, the direct cause of floor tiles and other building materials thermal expansion and contraction and squeeze each other, and more by the improper construction and building materials caused by the quality. Laying floor tiles should be noted that the use of laying floor tile 425 above the cement, sand should be filtered in the coarse sand, according to 1: 2 ratio, and set aside 1 mm expansion joints.
- Q: Composite wood floor F4 stars and E0 which environmental better?
- F4 star better, higher requirements for formaldehyde. The E0 level is equivalent to F3 star standard. The
- Q: Buy the composite floor, relatively cheap, when the sweep is dry with a wet mop dragged, but after the towing or Gong Gong drink drink 鼙 estimated Russia and Taiwan have a watermark with a dry mop can not all drag the watermark and other watermark dry To show a little bit of speculation that is not clean I was not used to clean the water there is no such situation with friends to support more ah
- Wipe dry with a mop, sprinkle the floor oil on the floor, and then drag.
- Q: How to laminate the floor?
- Third floor, seven install, it can be seen, how to shop composite floor, composite floor, how to shop is a very important thing. When the floor in the shop when the floor, should pay attention to what? The following is the sub-Aubian Xiaobian summary of the pavement composite floor when the main note: 1, guard pole Gua Gua Gai Ge Geng Kung grass base should be smooth, solid , Dry, clean, non-polluting, strength to meet the design requirements. 2, in the bottom of the building or cottage pavement to be moisture-proof treatment. 3, to strengthen the composite floor pavement, the indoor temperature should be in accordance with the provisions of the product specification requirements. 4, the bottom of the floor should be full of moisture at the end of the pad, pavement formation, seams can not be laminated, and fixed with tape. 5, the installation of the first row of the floor when the groove should be facing the wall, between the floor and the wall left about 10mm gap. 6, the room length or width of more than 8m need to set the expansion joints, install the pressure bar. 7, wooden skirting board with 45 degrees groove tight adhesion, height, wall thickness of the same, fixed nail cap is not exposed. 8, the surface straight, color, grain coherent, clean without glue marks.
- Q: Composite wood floor cracking with what glue is good
- The best use of professional puzzle glue or glue, these two kinds of plastic are solid wood flooring special glue, the general building materials store should be placed swinging limbs Hao Tong Tong profile have some, if it is not possible to use white latex Plus isocyanate-based curing agent, curing agent store will certainly have
- Q: How is the maintenance of the new floor laminate?
- In fact, the biggest advantage of composite wood flooring is no need to deliberately maintenance, if you really want to care about, you can play about the wax, In addition, it is best not to wear a hard bottom of the high heels or shoes with sand on the top walk. Of course, can not let your floor blisters. The The
- Q: A portion of the top layer is broken and the flooring is glued down.
- My suggestion would be to fill it with an epoxy material.
- Q: Just the floor of the composite floor, the floor of the elephant, paved, the other is ok, but in the floor and wardrobe where the transfer, stepped up a little creaky sound Why? Is there a way to solve it? (Feeling tread on the raft stare destroy the slander frost frost cream that place, the floor a little Alice, do not know what the reason, a step on the go a little, heel and recovery) more
- Composite floor sound is due to the floor lock slotted too loose or too tight caused by the floor after the floor due to the situation is not absolutely flat, in the tread when the slight floating caused by the floor seams at the friction caused by friction, which Is due to the floor in the production failed to achieve accuracy, the installation did not meet the standard requirements of the installation of sizing, as long as the consumer sent in the business before the installation did not give a written notice of the ground floor of the consumer borne by the consumer, then consumption Do not bear any responsibility, no matter how the responsibility of the business, re-disassembly and damage by the business is responsible. Solution: the original floor carefully disassemble, because it is not plastic, so in addition to the beginning of the demolition of a few pieces of raft stare at the destruction of the siege of frosting cream outside the eye, the other will not have any effect, will be removed Flooring place in place, and then re-glue the installation, remember to play D3 floor special glue, re-installed after there will be no call!
- Q: Have you heard that when the shop sprinkle some pepper can pest control is this? What better way? More
- Composite flooring with glue. Do not have rafts to destroy the evil raccoon scratched state Shan card worry insects. As long as moisture can be. When installed around the gap to stay good. Ground level generally do not have any problems.
- Q: Home underground water pipes leaking, to the composite floor valve crisp Juyi wrong with nitrogen hair open repair, the floor is a card slot, not very good demolition, but also afraid to break the floor, and ask how to open better The (To open the location is in the bathroom door 40cm place) Question added: I would like to split from the room at the stalls try, their own should pay attention to what? More
- Please professional company to break it!
Send your message to us
Laminate Flooring 8mm Export to Europe HDF Material
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
