HDF Laminate Flooring 8mm Export to World
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
Laminate flooring is a multi-layer synthetic flooring product, fused together with a laminationprocess. Laminate flooring ismost often four layers of materials,From topto bottom is Durable Overlay, Decorative Paper, HDF board, Balance Paper.
Durable Overlay is made by applying an AL2O3 solution over transparent paper, AL2O3 is very fineand thus it does not hide the color and design of the decorative paper.
Decorative Paper is a computer made paper which imitates natural wood, stone etc, by applying AL2O3to decorative paper, the latter becomes protected from the environment.
HDF board are made of wood fiber compressed into a high density panel (≥880kgs/m3).
Balance Paper is the thick and strong paper treated with AL2O3 on the back of laminate flooring,it gives stability to the laminate flooring boards and provide a measure ofisolation from under-floor humidity.
Wear Rating:
Durable Overlay Thickness | Applying Place | Euro Grade | EN438 | EN13329 | China National Stand |
22g/m2 | 21 Family Low Grade | AC1 | 2000 | ≥600 | 1500 |
33g/m2 | 22 Family Medium Grade | AC2 | 4000 | ≥900 | 2500 |
39g/m2 | 23 Family High Grade | AC3 | 6000 | ≥1800 | 4000 |
45g/m2 | 31 Commercial Low Grade | AC3 | 9000 | ≥2500 | 6000 |
62g/m2 | 32 Commercial Medium Grade | AC4 | 12000 | ≥4000 | 9000 |
76g/m2 | 33 Commercial High Grade | AC5 | 15000 | ≥6500 | 12000 |
Formaldehyde Emission:E1
Moisture Content:≤12%
Surface: Mirror, Middle Emboss, Fine Emboss, Crystal, Hand Scraped
Specification:
Thickness: 7.3mm,8.3mm, 12.3mm, 15.3mm
Based on order, other specification are alsoavailable.
Packing: 8-10 pieces per carton, 35-60 cartons perpallet, about 20 pallets per container.
- Q:Only a lot of white color on the surface, it seems white, especially uncomfortable, but not all are white, and with the time of the time, There are more and more places to go and fall. Will it be the same as the original color? Sincerely ask which teacher to help solve more
- The floor is divided into 4 layers 1, wear-resistant paper 2, decorative paper 3, substrate 4, balance paper you should be the surface of the surface problems 1, the number of wear-resistant paper low wear resistance is not up to standard 6000 or more do not know when you buy the floor when asked no 2, the decorative paper worn off this will be set off Ji hair irrigation He Guai Gu Gui pharynx out of the substrate out of your problem is the quality of the floor is not the cause of repair Repaired to buy only half a year I guess when you buy the price is not too high 60 below it
- Q:How to lay their own composite floor
- Floor heating room floor materials or the choice of floor tiles is better. This can be OKorder Geng high international 薨 uan arm for the force to ensure better heat conduction, heating up faster. Gas use is also more economical. Composite floor to be slightly worse .40 yuan compound The floor can be sure that is not a good floor. As for the floor tiles in the file on it. In order to better heat, paving in the case of ensuring the quality of the cement layer as low as possible.If there are more problems, you can click ID consultation.
- Q:Cheap point of the composite floor how much money a square meter
- Cheap point of the dozen to fifty, ranging from the price difference is very large, in the selection of the floor need to have skills 1) how to choose composite floor wear index: we all know the composite floor with solid wood flooring and solid wood flooring compared to the biggest advantages Is wearable. In the election of the strengthening point, we must pay attention to the composite floor wear index, the general use of the composite floor wear index in the family around 6000; and public use of composite floor wear index in 9000 turn. 2) How to choose the composite floor of the formaldehyde content of composite flooring in the production process will use adhesive, which contains formaldehyde. Many people task with formaldehyde floor is toxic, this view is wrong, the key is to see whether the formaldehyde content in the human body within the scope of the provisions of the national requirements of the composite floor formaldehyde content in the E1, E0, that is, the standard: E1 Level ≤ 1.5mg / L, E0 ≤ 0.5mg / L. As long as the scope of this indicator, is the health of environmentally friendly composite floor. 3) How to choose the composite floor of the expansion rate We all know solid wood flooring, solid wood flooring is made of natural wood processing, encountered a large area of ??water is easy to expand from the arch. Composite floor water is also easy to play from the expansion rate, the general standard within 2% is in line with national standards. 4) How to choose the composite floor of the flame retardant composite floor is welcomed by everyone in addition to wear, but also corrosion, burning and other characteristics, which is solid wood flooring and solid wood flooring can not achieve the advantages. Everyone in the choice of composite flooring when a cigarette can be lit on the surface of the composite floor to see whether the crack, dark spots, bubbling, if not on the composite flooring that is good.
- Q:Can the composite floor be installed,
- Theoretically possible. Composite floor installation method 1. In the composite floor before the installation of the first check whether the door can be opened freely, if not, to the bottom of the door to a certain thickness, and then lay a layer of PVC over the ground film, so that can play a noise And the effect of moisture. 2. Place the first composite panel at the corner, the tongue and groove on the wall, with a wooden wedge leaving about 10mm of the expansion joints. 3. When installing the wall to the last board, take a full plate, place it in parallel with the previous tenon, set aside 10mm crossed on the wall end, install until the end of the line, if the remaining material length For 40cm, you can keep to the next line to use. 4. From the second line, the inside of the tongue and groove to be evenly coated with the floor of the special glue (the first line does not glue), the floor is fully installed, and then wet cloth or plastic scraper in time to spill the glue off. 5. Tighten the floor with a hammer and a wooden last. 6. After the first two lines, in a timely manner with a rope or ruler to calibrate. 7. left the last line of time, to take a piece of the whole board, on the already installed on the floor, up and down alignment, and then take another floor, on the board above, one end of the wall, and crossed, along the line Saw, this is the width of the floor required. Installed to the last line of the board, put the wood last block, the use of special fasteners will be squeezed into the floor, after installation 2 hours, the withdrawal of wood last.
- Q:Solid wood flooring must use solid wood baseboard?
- Solid wood flooring must use solid wood baseboard?
- Q:My place where small, something more, had their own shop composite floor, do not know how to shop. Consult the knowledgeable master to help give pointers about, thank you! More
- Ready to hammer, and a board, each board to fight up when there will always be gaps, with a hammer pad with a knock on the board, the raft razed the drums can not directly knock on the floor, the floor will be knocked on the floor , Skirting line, then directly with glass glue it, a simple point
- Q:Solid wood composite floor suitable for installation to warm it?
- Home decor. The I've been doing it for twenty years. Composite flooring. My advice. Or the line.
- Q:Feeling tiles the plot is simple, the price is cheaper. The floor feels better, just bad maintenance. & Lt; Enchanting fengfeng 莶 莶 莶 童 童 斧 br br / & gt; Have you to explain this to me. More
- Because the restaurant is more frequent, the restaurant may occasionally have oil and soup spilled, strengthen the floor, then to consider a moisture-proof, as well as compared with the tiles are not very good cleaning, the sound of Feng Feng Hong It is recommended to use floor tiles. The price of the overall tile and the ground leveling plus the price of the main material, both of them are almost disparity is not too big. Polished tiles, antique tiles are generally recommended in the living room, they are easy to wear and maintenance. But to consider whether the light is sufficient, the former is relatively bright, the latter, then relatively simple as you mention the floor can be used in the bedroom study room more private space.
- Q:Solid wood, polymer materials and veneer baseboard which is more suitable for some? What are the advantages and disadvantages? Thank you more
- The most practical polymer, the price pressure to 18 yuan with the installation on the OK
- Q:Do you want to remove the original floor? Decoration company will take this little work? More
- I am an interior designer. Get rid of some. You find a floor to sell the floor in his selection of the floor he was long Ding Fu scraping the water of the palm of the water to find a way to solve the whole process. Do not look for a decoration company. Separate works do not come.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
HDF Laminate Flooring 8mm Export to World
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 2000000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords