eps sandwich wall panels
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
EPS Sandwich Panels
EPS Styrofoam Sandwich Panel
Structure | 1.)Steel sheet for both the surface 2.)Explosion polystyrene for the core material |
Steel Sheet Thickness | 0. 3~0.6mm,PPGI |
Panel thickness | 50mm~200mm,common thickness is 50mm,75mm,100mm,150mm and 200mm |
Effective width | 1.) 950/980mm--- Corrugated Roof Panle 2.) 950 / 1150mm---Wall or Ceiling Panel |
Length | Custom, less than 11.8m |
EPS density | 10~20kg/m3 , Normal is 12kg/m3,14kg/m3 |
Color | Regular is White/Red/Blue, also can be Custom |
Heat conductivity | ≤0.045 W/m.k |
Parts | Steel covered-sides for easy to connect one piece to another, easy to assemble Film covering to protect the steel of panels |
lifetime | 20~25 years |
Character | Light in weight, heat insulation, fireproof and waterproof, fast installation ,environmental |
Use | for all kinds of prefabricated buildings’(warehouse, workshop, garage etc.) roof and wall for existing buildings, can be exterior protected construction or bearing structure |
Packing | Flat packing in shipping Container or according to your demands |
Structure –The EPS panel is constituted by two sheets and middle condensed polystyrene foam board. The upper and lower surface of the panel can be different kind of metal sheets.
Features:
1)Weatherability
EPS covered with fiberglass alkali-resistant mesh and special glue and cement, it has particular weather resistance and durability. It will not crack, bubble and peel when being used in ultraviolet radiation, moisture, salt, heat and cold insulation for long time. Our products are durable and can resist the affects of rain, snow, wind, frost and or other bad weather.
2)Heat insulation and Fireproofing performance
Expandable polystyrene foam incorporated into the panel design shall provide a sufficient thermal break to ensure non-conductivity of temperature between surfaces. The building can reach the standard of energy-saving design without EIFS. It is ideal material for construction in both tropical and frigid countries, it will bring you a comfortable and safe habitation. The core of new self-insulation composite wall material is fireproofing EPS. The completed panels with finished surface are un-inflammable and its fire prevention performance reach B class of GB8624 standards according to testing results from National Center for Quality Supervision and Testing of Fire Building Material.
3)High supporting capability
Individual panel size and configuration is dependent upon project design requirements. The integrated galvanized antirust steel studs for strength is pre-inserted in the wall, and strength of our system depends on the specification and space of steel studs.
4)Installing easily and quickly
It is easy to install with some bonding glue. Our building systems create a single, one-piece corner or T-shaped connecting sections, eliminating the difficult problem of joints between two walls. Wall section is a fully structural, insulated system of factory made sections are easily to assembled on site. Several workers are enough for whole construction, and only need 1/3 time of traditional construction.
5)Excellent strength and durability
Our building systems is customized to the exact architectural drawings, design and specifications and can also be used for almost all kinds of foundation wall system as well as structural floor, wall and roof systems. Formed steel studs shall comprise the integral framework of all panels and sections. It provides lasting strength. Our system and panels shall meet or exceed all code requirements. The houses can be installed without other frame and make the building durable enough.
6)Wide applications
Our building systems could be widely used in exterior wall and partition of villas, residential houses, workshops, cold storages, security lodges, civil engineering, mobile toilets, rubbish centers, transformer substations, sentry boxes and other prefabricated houses.
7)Low Cost--Industry and trade integration
We have our own factory with several production lines manufacturing the panels and sell them through our own trading company. So we can give you the most competitive price and control the delivery time for your benefits!
- Q: How to install the cold sandwich sandwich sandwich panels
- If the use of polyurethane cold storage board, then use the structure of the installation of the installation time can be reported to us can also install their own This is a drawing in accordance with the drawings can be installed
- Q: What are the quality standards for color steel sandwich panels?
- Reference to national standards: GBT_23932-2009_ Building metal surface insulation sandwich panels
- Q: Activity board room C-shaped steel and Caigang sandwich panel is how to connect the seal?
- This is the plug without sealing if you need to seal and then plug the sealant on the line
- Q: I just got a polyurethane sandwich board production line, I would like to ask about making money!
- Soft surface or color steel? Color steel is now OK, soft surface of many areas do not let the country, B2 is not up to standard, B1 technology is not mature, and now do the wall decoration board quite fire
- Q: Bubble (EPS) color steel sandwich panels how to wear thread
- EPS sheet can not use the dark cable way, you must use PVC flame retardant pipe cable, need to use the hole at the hole, out to look good.
- Q: Plan to use Caigang sandwich panels to do the roof. The wall is brick wall. Ask how the sandwich panel is fixed on the brick wall ah?
- Wall to do reinforced concrete ring beam cap, and then fixed on the ring beam C-keel, sandwich plate fixed on the keel, complete.
- Q: Color steel sandwich board where the best quality?
- To see where you are, too far away from the good cost is also high, the best distance from the nearest, I was Xuzhou people, I think before the company in the Pepsi Steel made Bo Sige plate is very good,
- Q: What are the key notes when buying a rock wool sandwich panel?
- 1. Slag content; slag content determines the quality of rock wool. High-quality rock wool is made from basalt or diabase, while poor quality rock wool is mixed with blast furnace slag or other metallurgical slag. In contrast, the slag content is low and the acidity is low Poor, with the temperature changes will greatly accelerate the fiber fracture and powder, thus losing strength and insulation properties. So, will become a building hazard. 2. Fiber average diameter; national standard is ≤ 7μm. The new rock wool fiber-forming process combined with the basalt material itself makes the rock wool fiber slender and flexible, the fiber diameter can be stabilized at 4-7μm; the pendulum method and the multi-dimensional pleating technique make the distribution of the Yanmian fiber evenly and in three dimensions Chaos, greatly improving the density and strength of rock wool. 3. Thermal conductivity; high quality rockwool slag ball content is low, fiber diameter is moderate, the use of pendulum method of production technology, fiber distribution, uniform direction, bulk density uniformity, low thermal conductivity. Poor rock wool is the opposite. Usually slag cotton using sedimentation chamber production process, low thermal conductivity
- Q: The steel roof and the sandwich panel are waterproof
- The two are actually the same class of things, sandwich panels only the color plate and insulation layer together, the installation more convenient. And the pressure steel roof need to lay another insulation layer and the roof. For both, the weak links of water are between the plates. In the actual project, the seam of the steel plate roof can be made in many forms, some of the overlapping form of waterproof performance is very good, and the common sandwich board roof shape is relatively simple, so the waterproof performance is also worse.
- Q: What is the difference between the board and the core board?
- Big core board price is cheaper than the core board, the vertical (to the core material to distinguish) bending strength is poor, but the lateral bending strength than ... but generally do not choose the best! Plywood is made of three or more layers of 1mm thick veneer sheet made of hot pressing. Plywood is generally divided into 3mm, 5mm, 9mm, 12mm, ... plywood buy plywood by multi-layer single The plates are arranged in a crisscross arrangement. The outermost front panel is called a panel, and the back is called a backplane. The inner board is called the core plate.
Send your message to us
eps sandwich wall panels
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
