EPS sandwich panels
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
EPS Sandwich Panels
EPS Styrofoam Sandwich Panel
Structure | 1.)Steel sheet for both the surface 2.)Explosion polystyrene for the core material |
Steel Sheet Thickness | 0. 3~0.6mm,PPGI |
Panel thickness | 50mm~200mm,common thickness is 50mm,75mm,100mm,150mm and 200mm |
Effective width | 1.) 950/980mm--- Corrugated Roof Panle 2.) 950 / 1150mm---Wall or Ceiling Panel |
Length | Custom, less than 11.8m |
EPS density | 10~20kg/m3 , Normal is 12kg/m3,14kg/m3 |
Color | Regular is White/Red/Blue, also can be Custom |
Heat conductivity | ≤0.045 W/m.k |
Parts | Steel covered-sides for easy to connect one piece to another, easy to assemble Film covering to protect the steel of panels |
lifetime | 20~25 years |
Character | Light in weight, heat insulation, fireproof and waterproof, fast installation ,environmental |
Use | for all kinds of prefabricated buildings’(warehouse, workshop, garage etc.) roof and wall for existing buildings, can be exterior protected construction or bearing structure |
Packing | Flat packing in shipping Container or according to your demands |
Structure –The EPS panel is constituted by two sheets and middle condensed polystyrene foam board. The upper and lower surface of the panel can be different kind of metal sheets.
Features:
1)Weatherability
EPS covered with fiberglass alkali-resistant mesh and special glue and cement, it has particular weather resistance and durability. It will not crack, bubble and peel when being used in ultraviolet radiation, moisture, salt, heat and cold insulation for long time. Our products are durable and can resist the affects of rain, snow, wind, frost and or other bad weather.
2)Heat insulation and Fireproofing performance
Expandable polystyrene foam incorporated into the panel design shall provide a sufficient thermal break to ensure non-conductivity of temperature between surfaces. The building can reach the standard of energy-saving design without EIFS. It is ideal material for construction in both tropical and frigid countries, it will bring you a comfortable and safe habitation. The core of new self-insulation composite wall material is fireproofing EPS. The completed panels with finished surface are un-inflammable and its fire prevention performance reach B class of GB8624 standards according to testing results from National Center for Quality Supervision and Testing of Fire Building Material.
3)High supporting capability
Individual panel size and configuration is dependent upon project design requirements. The integrated galvanized antirust steel studs for strength is pre-inserted in the wall, and strength of our system depends on the specification and space of steel studs.
4)Installing easily and quickly
It is easy to install with some bonding glue. Our building systems create a single, one-piece corner or T-shaped connecting sections, eliminating the difficult problem of joints between two walls. Wall section is a fully structural, insulated system of factory made sections are easily to assembled on site. Several workers are enough for whole construction, and only need 1/3 time of traditional construction.
5)Excellent strength and durability
Our building systems is customized to the exact architectural drawings, design and specifications and can also be used for almost all kinds of foundation wall system as well as structural floor, wall and roof systems. Formed steel studs shall comprise the integral framework of all panels and sections. It provides lasting strength. Our system and panels shall meet or exceed all code requirements. The houses can be installed without other frame and make the building durable enough.
6)Wide applications
Our building systems could be widely used in exterior wall and partition of villas, residential houses, workshops, cold storages, security lodges, civil engineering, mobile toilets, rubbish centers, transformer substations, sentry boxes and other prefabricated houses.
7)Low Cost--Industry and trade integration
We have our own factory with several production lines manufacturing the panels and sell them through our own trading company. So we can give you the most competitive price and control the delivery time for your benefits!
- Q: What is the foam in the color steel foam sandwich panel?
- EPS is the English abbreviation of the bubble; but now it is not easy to use fire, but fire or rock wool
- Q: Can the sandwich panels be used to make hoods
- Look at the strength of this board, and some are possible. Our factory's showcase is a kind of sandwich board. Board need to be fixed. And then install the hood, because we mainly do display, do not know whether long-term use will lead to loose. Want to use or will rely on a certain loose. It is recommended to normal home improvement or fixed in a solid wall is better. Such as short-term use can be used sandwich panels. But the board is to be fixed
- Q: I just got a polyurethane sandwich board production line, I would like to ask about making money!
- Soft surface or color steel? Color steel is now OK, soft surface of many areas do not let the country, B2 is not up to standard, B1 technology is not mature, and now do the wall decoration board quite fire
- Q: Sandwich board machine how much money
- I am the production of color plate machine, and hope to cooperate with you, OKorder Zhongji machinery Yang Yun
- Q: What is the sandwich panel, sandwich board what is the use of what the characteristics of sandwich panels
- Sandwich panels, composed of two layers of metal panels (or other material panels) and directly in the middle of the panel foam, mature molding of the polymer core insulation composition, easy to install, light and efficient. Filling system is also used to close the molecular structure, you can put an end to the condensation of water vapor. Sandwich panels are a common product in the current building materials, not only good flame retardant and environmentally friendly Sandwich board English name: laminboard Sandwich panel products are composed of two layers of metal panels (or other material panels) and directly in the middle of the panel foam, mature molding of the composition of the polymer core insulation. These sandwich panels are easy to install, lightweight and efficient. Filling system is also used to close the molecular structure, you can put an end to the condensation of water vapor. [1] The formation of the outer steel plate takes full account of the structural and strength requirements, and take into account the aesthetic, the inner layer of the formation of flat to meet the needs.
- Q: What is the wall of the steel wire mesh in the building company? Is it easy to fix it again?
- Permanent wall is a new type of steel mesh sandwich panels, building without bricks, stay fast, low cost, Dongnuanxialiang, strong earthquake, energy saving, exclusive rural building materials, galvanized steel wire mesh Meet the use of functional and structural requirements of the space grid, the middle filled with molded polystyrene foam board or rock wool board and the formation of the board, in the Chinese industry standard specification referred to as CS board. CS board on both sides of the configuration of the longitudinal reinforcement, spray (wiping) concrete and the formation of the composite board wall, referred to as CS wall panels, that is, steel frame concrete composite panel wall. With fire insulation and anti-vibration can be secondary maintenance characteristics, far better than the effect of brick building.
- Q: Share what is color steel sandwich panels, what are the characteristics and applications
- Sandwich panels, composed of two layers of metal panels (or other material panels) and directly in the middle of the panel foam, mature molding of the polymer core insulation composition, easy to install, light and efficient. Filling system is also used to close the molecular structure, you can put an end to the condensation of water vapor. Sandwich panels are a common product in the current building materials, not only good flame retardant and environmentally friendly Sandwich board English name: laminboard Sandwich panel products are composed of two layers of metal panels (or other material panels) and directly in the middle of the panel foam, mature molding of the composition of the polymer core insulation. These sandwich panels are easy to install, lightweight and efficient. Filling system is also used to close the molecular structure, you can put an end to the condensation of water vapor. [1] The formation of the outer steel plate takes full account of the structural and strength requirements, and take into account the aesthetic, the inner layer of the formation of flat to meet the needs.
- Q: Foam sandwich board in line with the fire building requirements? There is no regulatory requirements in this area? I was in Jiangsu !! Thank you
- The common application of new composite sheet. ??????????????????????????????? The new composite sheet is mainly used in the exterior wall of the steel structure plant, the roof, the gymnasium's light roof, the clean room interior cut, the clean area roof, the cold storage box or the partition plate, the construction site office and the construction workers collective dormitory, Relief temporary resettlement housing, some units will also be used for composite materials workshop, office, rooms and even operating room partition. Now the implementation of building energy efficiency standards, the foam composite sheet is also widely used in building exterior insulation layer. The use of new composite materials in the building is very wide, the use of a lot, its combustion performance and fire resistance to the building's fire safety situation greatly affected.
- Q: What is the name of the board?
- Hello, the common is polystyrene sandwich panels (EPS sandwich panels), commonly known as foam sandwich panels, the middle is the bubble, both sides of the steel plate, when pressed, the machine will have a brush brush glue, two glue in a short time Will quickly respond, and a certain amount of penetration into the bubble gap, to reach a solid role. (EPS can be understood as the availability of polystyrene, with the addition of flame retardants, without the addition of flame retardants. Another foam bulk density that density will also affect the cost of the entire sandwich panel, the two sides of the color coated roll Steel plate thickness of the impact of the largest price, followed by flame retardant or non-flame retardant, and then the foam bulk density) Other common rock wool sandwich panels, PU (polyurethane) sandwich panels, which are basically non-flammable rock wool, polyurethane prices are too high, very few people use. Some manufacturers may already be able to produce XPS like extruded foam plus the board. For a long time did not write this, when the review, and hope to help the landlord ~
Send your message to us
EPS sandwich panels
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
