Electrical Wire Cable with Good Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Product Description
This product is suitable for linking the household electrical appliance, small electric tools, Instrument and power lighting devices with the rated voltage equal or less than 450/750V AC. The operation temperature of the wire is 90℃ for BV-90 and RV-90,BV-105 modle not more than 105℃,The other is 90℃.Installation temperature not lower than 0℃.
Standard: IEC60227 or BS, EN, AS.
2. Specification
Nominal seaction(mm2) | Specification | Insulation thickness | sheath | Resistance in 20 |
2X1 | 32/0.20 | 0.6 | 0.8 | 19.5 |
2X1.5 | 30/0.25 | 0.7 | 0.8 | 13.3 |
2X2.5 | 49/0.25 | 0.8 | 1 | 7.98 |
3X1 | 32/0.20 | 0.6 | 0.8 | 19.5 |
3X1.5 | 30/0.25 | 0.7 | 0.9 | 13.3 |
3X2.5 | 49/0.25 | 0.8 | 1.1 | 7.98 |
4X1 | 32/0.20 | 0.6 | 0.9 | 19.5 |
4X1.5 | 30/0.25 | 0.7 | 1 | 13.3 |
4X2.5 | 49/0.25 | 0.8 | 1.1 | 7.98 |
5X1 | 32/0.20 | 0.6 | 0.9 | 19.5 |
5X1.5 | 30/0.25 | 0.7 | 1.1 | 13.3 |
5X2.5 | 49/0.25 | 0.8 | 1.2 | 7.98 |
3.Characteristic
1. The rated voltage of the wires should equal to or higher then the rated voltage of the system when wires are used at AC system. If the wires are used at DC system, the rated voltage of system should lower then 1.5 times as high as rated voltage of cable and wires. The working voltage of the system could be 1.1 times as high as the rated voltage of the cable.
2. The long term working temperature should lower then 70oC. The working temperature of BV-90 should lower then 90oC. And the laying temperature should higher then 0oC.
3. The curve diameter of the wire should longer than 8 times of the diameter of the outer diameter of cable and wires if their outer diameter is 25 mm or above. If the diameter of cable and wires is above 25 mm, the curve diameter should be at least 12 times of the outer diameter of the cable and wires.
4.Pictures
- Q: I had to extend some speaker wires, so i used a second speaker cord and wrapped it to the one out the speaker, but the exposed section doesnt look to safe, and it runs behind my bed so i`m a little unsure about it being uncovered. Can i use duct tape just to cover the open wires? or is electrical tape NEEDED? It is plugged into the wall, not battery powered.
- This Site Might Help You. RE: Duct tape instead of electrical tape for speaker wire? I had to extend some speaker wires, so i used a second speaker cord and wrapped it to the one out the speaker, but the exposed section doesnt look to safe, and it runs behind my bed so i`m a little unsure about it being uncovered. Can i use duct tape just to cover the open wires? or is electrical
- Q: I have an electrical switch that was faulty so I'm in the process of replacing it. I have a garage door opener that is plugged into an outlet on the garage ceiling that needs power all the time and a light that needs to be on a switch, on the same circuit. This doesn't seem possible to me but it's how it was wired previously. Unfortunately, I've already tossed the old switch thinking, “Oh, I'll just figure it out”. I have a tan wire, a white wire, and a black wire available I also have a 2-way and 3-way switch available.
- Don't know where you live (country) but in N.A. the white will be common and the tan(sometimes red) and black are power the white will go to both the light and the receptacle-whatever color (tan or black) is in the receptacle will be constant power-and the other should come from the switch to the light
- Q: I need help. I am doing this project for school and I need to create an electrical current using copper wire and batteries. How should i connect the copper wires to the AA bateries. I need help. I tried connecting them but the batterie is giving off no heat or anything. The batteries have power in them. They are re-chargeable batteries.
- Hold the copper wire over the end of a battery then use aluminum foil to hold it in place, then use normal tape on the aluminum. You probably will not detect heat, You can use a voltmeter on the copper wires or get some kind of LED light etc from radio shack.
- Q: What is the price of cable 3 * 2.5 + 1?
- Cross-sectional area * length * density = mass such as: 1 m YJV-1KV-3 * 90 cable 3 * 90 * 1 * 0.0089 = 2.403KG
- Q: I bought a house with a few newer built rooms and I know the wiring is new but for the rest of the house which was built in the 40's it has old braided looking type of wiring. Instead of hiring an electrician to come in and completely rewire all the old stuff, I would like to run all the wiring myself to save some money and then have an electrician come in and put a new box in and hook it all up.
- It depends on what value circuit breaker you install. For a 15 amp circuit, you use 14 gauge wire For a 20 amp circuit, you use 12 gauge. There's nothing that says you can't put the box in yourself, just make sure you get the required permits and get it approved. Heck, running the wire is the hardest part. Plenty of people do their own electrical without being licensed. Just get a decent book to understand the basic codes. I wired by entire basement based on the Electrical 101 book from Home Depot. Put in my own panel, wired it to the main, ran all the outlets. The people on here trying to talk you out of it don't like the competition.
- Q: I am running a new wire from the electrical panel to my flat panel tv. problem is there is a cold air return in the way. I am a bit worried running it across the bottom, in the basement, of the cold air return, seems like it would be a fire hazard. should I run it through conduit? if so what kind? flexible? metal? rubber? thanks.
- The return air duct is always gonna be the same temp as the house within a few deg. I don't see a problem being against the outside of it. Additional I would just run the romex then (White or yellow rubber sleeve) If you ever want to put up a ceiling down there you just put up ferring strips (1x2s) to allow space.
- Q: My home is 2.5 square aluminum, I would like to ask the maximum load of electricity a few kilowatts, thank you!
- ZR-YJV22-0.6 / 1kV-3x185 + PE95 for three-phase three-wire cable, three 185 square plus one protection line 95 square. ZR-YJV22-0.6 / 1kV-3x185 + 95 for three-phase four-wire cable, three 185 square plus one neutral 95 square.
- Q: Why is the wire hot when a short circuit occurs?
- The state does not specify that small plastic lines are generally 100 meters in packaging. The other looks at the size of the disk and the customer's own needs.
- Q: How to ask what the current of the wire to bear the formula. For example, 1.5 square feet to bear how much the current how to ask the details of the more about the more
- Mobile EVD and set-top boxes are the same as the output device, is connected to the TV
- Q: i need to run an eletrical wire from one building to another. both have breaker boxes the first is a 200 amp which will feed a 100amp
- You need an electrician to be honest most work on electrical systems need to be covered with the relevent certification under part p of the building regs otherwise you may have problems with insurance /local authoritys etc
Send your message to us
Electrical Wire Cable with Good Quality
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
