Concrete Delivery Pipe for Zoomlion Concrete Pump
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 2000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Concrete Delivery Pipe for Zoomlion Concrete Pump
1. Structure of Concrete Delivery Pipe for Zoomlion Concrete Pump:
St52 Weld Pipe: Main use for Trailer-mounted pump, thickness has 4.0mm, 4.5mm, 5mm. Compare with for Truck-mounted pump. Weld pipe has cheaper price, so it is popular in Saudi, Pakistan, India, etc. Unit Price is about 30USD-33USD.
St52 Seamless Pipe: Now More People like use this kind for Truck Pump and Trailer Pump because of the quality is better and it is seamless kind, so this kind pipe is most popular in Middle East Price About 34USD-37USD.
2. Main Features of Concrete Delivery Pipe for Zoomlion Concrete Pump:
• High Wear-resistant, long service life, lower cost
• In case of quality problem the company provide free replacement.
• Provide technical support for free.
• Provide consumers with regular visits
• Ensure the supply of ancillary parts
• Our company passed the ISO9000 certification, the product through 3C certification in full compliance with national standards
3. Concrete Delivery Pipe for Zoomlion Concrete Pump Images:
4. Concrete Delivery Pipe for Zoomlion Concrete Pump Specification:
Name | Structure | Specification | Weight | Life time | Impact force | Notched bar impact strength | Max. work press |
Normal wear resistant pipe | Single | DN125*3000mm | 48kgs | 6000 - 8000 | ≥45 | ≥27 | 36 bar |
Economic wear resistant pipe | Single | DN125*3000mm | 45kgs | 18000 - 22000 | ≥47 | ≥28 | 93 bar |
Construction wear resistant pipe | Single | DN125*3000mm | 45kgs | 20000 - 25000 | ≥47 | ≥28 | 93 bar |
Diamond wear resistant pipe | Single | DN125*3000mm | 44kgs | 25000 - 35000 | ≥47 | ≥38 | 93 bar |
W12-5 wear resistant pipe | Twin | DN125*3000mm | 43kgs | 50000 - 60000 | ≥ 42 | ≥25 | 59 bar |
W12-8 wear resistant pipe | Twin | DN125*3000mm | 43kgs | 60000 - 80000 | ≥ 43 | ≥25 | 59 bar |
GX350-1 wear resistant pipe | Twin | DN125*3000mm | 44kgs | 80000 - 100000 | - | - | 34 bar |
GX350-2 wear resistant pipe | Twin | DN125*3000mm | 68kgs | 120000 - 150000 | - | - | 76 bar |
Name | Data |
Material | 45MN2/20#/16MN/Q345 |
Thickness | According to customer requirements |
Color | red, white , etc. |
Using life | 20.000m³-80.000m³ |
Weight | 43kg,48kg,69kg |
Length | 1-6m, according to customer requirements |
Model | DN125,DN150 |
Flange | SK/ ZX /FM flange |
Painting | Electrostatic Spraying Epoxy Paint |
Welding | Smooth welding between straight pipes and flanges |
Process | High temperature quenching |
HRC | 65 |
5. FAQ:
We have organized several common questions for our clients, may help you sincerely:
①Is your products exported a lot?
We have exported to many, many countries. Every year we ship more than 30 containers of these spare parts. Our main market is in Middle-east, Asia & Africa.
②How to guarantee the quality of the products?
We have established the international advanced quality management system,every link from raw material to final product we have strict quality test;We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
③How long can we receive the product after purchase?
In the purchase of product within three working days, we will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 15 working days can be served.
6. Why choose us:
• We are a comprehensive manufacturing and trading company.
• Our company is one of the biggest manufacturing and trading companies in China.
• We have been specialized in producing concrete pump spare parts and specialized in producing all kinds of concrete pump parts. As Concrete Pump Pipe, Concrete Pump Elbow, Concrete Pump Rubber Hose, Concrete Pump Wear Plate, Concrete Pump S Valve, Concrete Pump Piston and so on.
• We are famous for our superior quality, competitive prices, first-class craftworks, safe package and prompt delivery.
• We have been supplying concrete pump parts for SCHWING, PUTZMEISTER, SANY, CIFA, KYOKUTO, ZOOMLION for 10 years, so we can promise you the quality and best price.
- Q:What are the basic criteria for the design of mechanical parts?
- (2) the demolition of the old machine parts of the work, the stress components and their connections, should meet a predetermined maximum load enough strength, stiffness and stability during normal operation should not occur due to the work cycle or stress or fatigue fracture times have broken, excessive deformation or collapse; also must considering the stability of the whole mechanical equipment under the premise of the anti overturning wind or anti slide, especially those with mechanical vibration displacement load or its expected quality uneven distribution.(3) adequate adaptability to the use of the environment. The work equipment of the demolition of the old machine parts must be used to the environment (such as temperature, humidity, air pressure, wind load, snow load, vibration, and electrostatic, magnetic and electric fields, radiation, dust, microorganism, animal and corrosive medium) has enough ability to adapt, especially anti corrosion or erosion, aging wear, anti-interference ability, not because the electrical components affect the physical, chemical and biological caused by accident.
- Q:In the design of machine parts, how to choose the matching of bearings, what should be paid attention to when assembling?
- Mechanical design manual there, and directly check out, you can, but to consider whether the use of the installation and removal of tools, there is no best to do loose, or else it is very difficult
- Q:Mechanical design, hardness of the workpiece, how to determine, for example, in the drawings, technical requirements of the hardness value how to get?
- 1. the hardness of the workpiece should be determined to determine the hardness of the workpiece for the design according to the working conditions of the workpiece, such as linear bearings for the hard axis, because the shaft and ball contact stress, the equivalent of the bearing outer ring, so the hardness in 60-64HRC, which requires the use of accumulated experience, can also query the relevant information to obtain.2., because of the hardness requirements, so the need for reasonable material selection and heat treatment methods; or linear bearings used for hard shaft, it is necessary to choose the appropriate material Cr15, and the surface high-frequency quenching. Material can be used in the design manual to select materials, and heat treatment processes are required to refer to the Handbook of heat treatment processes.3., as designers, there is no need to be proficient in materials, knowledge, and heat treatment processes, but it should be understood that no mistakes should be made. For example, the choice of 2Cr13 as linear bearings with the hard shaft, that hardening is not to improve the hardness. Or choose the right material, but there is no corresponding heat treatment, the surface hardness is not guaranteed.
- Q:An analog aircraft equipment, in the middle of the two electric cylinder to provide equipment up and down force, two electric cylinders are together and synchronized up and down movement (should be an electric cylinder support force is not enough?) I understand so, so it can only provide the upper and lower forces, the front and left of the three directions, each one of the black rod-shaped structure is how to provide the equipment about deviation, upward and downward deflection of the force? At the same time, how to make these forces achieve controllable effect, complete flight simulation?If cannot send the video address to BIRDLY Baidu flight simulator with complete video, can be seen with me after the detailed explanation, there can also be additional points I'm curious about design of the structure, the answer may take some time and I say that with QQ
- Machinery, derived from the Greek Mechine and Latin Machina, originally referred to as "ingenious design", as a general mechanical concept, can be traced back to the ancient Rome period, mainly in order to distinguish between hand tools. The word "mechanical" in modern Chinese is the generic term for "Mechanism" and "machine" (Machine). Mechanical features are: machinery is a combination of artificial physical components. A definite relative motion between the parts of a machine. So the machine can convert mechanical energy or perform useful mechanical power, is the modern mechanical principle in the basic concept, the modern concept of multi-source Chinese mechanical word from the Japanese "machinery", Japan's machinery products do the following definition of mechanical concept (that is consistent with the following three features called Machine).
- Q:In the process of mechanical design, those areas should be designed as fillet and when to design chamfer. These materials can be found in those places, and the title of the book is also OK. Thank you!
- Fillet is generally cast out, chamfering is generally processed out.In order to eliminate stress concentration, a cylindrical part needs to be rounded in order to eliminate the stress concentration.In general, the outer circle, the inner hole and the threaded orifice need chamfering, some are the process requirements, some are assembly requirements (for example, you don't chamfer the parts, especially the smaller ones)...The old saying upstairs is what I want to say. I hit half and found it was called back
- Q:And parts, components, institutions, the relationship between the threeIs the key a part?
- parts, but to "the pedals and sprocket" together, and form component. Several components constitute a chain drive mechanism. Similarly, key parts.
- Q:What are the main principles of mechanical principles and mechanical parts design?
- Factors to consider when designing mechanical parts:1. the function of the parts, the parts in the equipment, and its uses. Is the part shaft or instrument housing or support seat?2. the load of the parts, according to the load or according to the strength requirements, determine the brand of material.3. heat treatment conditions, heat treatment and no heat treatment conditions, the election of different materials;
- Q:What do engineers need to learn from mechanical design as an electronic hardware engineer?
- In recent years, electronic technology, optical technology has been rapid development, these instruments need photoelectric conversion system, electronic system, precision machinery system together, in order to realize the function of, it is a challenge to the traditional mechanical design, at the same time precision machinery design came into being.
- Q:Are they usually steel 45? Under what circumstances do you need special treatment? Such as conditioning? Seek great God pointing! Be deeply grateful!
- If you pay attention, you will find that the country with the largest amount of steel, steel, steel and other materials is a low cost Q235 material, followed by Q345 and other materials, only in the shaft parts of important requirements, has high hardness and comprehensive strength, it needs conditioning, with 45 steel quenched and tempered steel or 40Cr like the.
- Q:What exactly is mechanical design?
- Mechanical design (machine, design),According to the requirement of the mechanical structure, working principle, motion, force and energy transfer,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Concrete Delivery Pipe for Zoomlion Concrete Pump
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 2000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords