Tower Crane TC6520 VFD PLC New Technology
- Ref Price:
-
$10,000.00 - 50,000.00
/ unit
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 30 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
Detail of Tower Crane
Feature:Tower Crane
Condition:New
Model Number:TC6520(QTZ160)
Place of Origin: China (Mainland)
Brand Name: CMAX
Certification: ISO,CE
Warranty: 1 Year
Application:Building,Construction,Industrial
Main Features of Tower Crane
1) This kind of crane adopts standard section hydraulic lifting and connecting.The max. height can reach 180m with wall tie ins.
2) It has high working speed, good speed-adjusting performance, steady operation and high efficiency. Three-speed motor and mono-speed ratio decelerator are applied in the lifting struction, which enables heavy load low speed and light load high speed.
3)The range-change structure drives the trolley moving on the horizontal crang jib, with good positioning performance. Planet gear decelerator is applied in the circumgyrating structure, together with moment-limiting hydraulic coupler, which can relize high load capacity, steady starting and reliable operation.
4) The crane has complete set of safety devices, which can guarantee the safe and high efficienct operation. The crane is equipped with lifting height limiter, trolley ranging limiter, moment limiter, weight limiter etc..
5)The cranehas scientific layout and handsome appearance. The drivers cab is set independently on one side, with good vision field. It creates a good working environment for the operator.
Specification of Tower Crane
Technical Sheet for TC6520
Free standing height (m) | 50 | ||||
Max height with attachment (m) | 200 | ||||
Working range can be adjusted（m） | 55、60、65 | ||||
Min working range（m） | 2.5 | ||||
Max lifting capacity（t） | 10 | ||||
Tip load @ 65m（t） | 2 | ||||
Hoist mechanism (VFD+PLC) | Falls | 2 | 4 | ||
Lifting capacity（t） | 0－2.5 | 0－5 | 0－5 | 0－10 | |
Speed（m/min） | 0－80 | 0－40 | 0－40 | 0－20 | |
Motor | YZPBF250M1-6-45KW | ||||
Trolleying mechanism (VFD+PLC) | Speed（m/min） | 0-56 | |||
Motor | YZPBE132S-4-5.5KW | ||||
Slewing mechanism (VFD+PLC) | Speed（r/min） | 0-0.6 | |||
Motor | YTW112M-4-5.5KW×2 | ||||
Climbing speed（m/min） | 0.5 | ||||
Counterweight（t） | 21.3 | ||||
Mast section size（L×W×H）m | 2×2×3 | ||||
Working temperature | -40－+60℃ | ||||
Total power (KW) | 63 | ||||
Power supply requirement (KVA) | 230KVA for generator | ||||
Cable type ( within 35 meters from site power source to lower electric box of tower crane ) | 50mm2（3+2, 5 cores） | ||||
Startup voltage & current | 380V×95%=361V 219A | ||||
Rated working voltage & current | 380V 121A | ||||
Loading diagram：
65m jib length：
R | 20 | 25 | 30 | 35 | 40 | 46 | 48 | ||
a=2 (t) | 5t---29.1m | 4.84 | 4.1 | 3.53 | 3.02 | 2.87 | |||
a=4 (t) | 10t---14.73m | 7.33 | 5.8 | 4.77 | 4.03 | 3.46 | 2.95 | 2.8 | |
R | 50 | 52 | 54 | 56 | 58 | 60 | 62 | 64 | 65 |
a=2 (t) | 2.74 | 2.62 | 2.5 | 2.4 | 2.3 | 2.21 | 2.12 | 2.04 | 2.00 |
a=4 (t) | 2.67 | 2.55 | 2.43 | 2.33 | 2.23 | 2.14 | 2.05 | 1.97 | 1.93 |
60m jib length：
R | 20 | 25 | 30 | 36 | 38 | 40 | 42 | ||
a=2 (t) | 5t---35.67m | 4.95 | 4.67 | 4.42 | 4.19 | ||||
a=4 (t) | 10t---18.15m | 9.06 | 7.2 | 5.94 | 4.88 | 4.6 | 4.35 | 4.12 | |
R | 44 | 46 | 48 | 50 | 52 | 54 | 56 | 58 | 60 |
a=2 (t) | 3.98 | 3.79 | 3.61 | 3.45 | 3.3 | 3.16 | 3.03 | 2.91 | 2.8 |
a=4 (t) | 3.91 | 3.72 | 3.54 | 3.38 | 3.23 | 3.09 | 2.96 | 2.84 | 2.73 |
55m jib length：
R | 20 | 25 | 30 | 32 | 34 | 36 | 38 | ||
a=2 (t) | 5t---37.75m | 4.97 | |||||||
a=4 (t) | 10t---19.23m | 9.61 | 7.64 | 6.31 | 5.89 | 5.52 | 5.19 | 4.90 | |
R | 40 | 42 | 44 | 46 | 48 | 50 | 52 | 54 | 55 |
a=2 (t) | 4.70 | 4.45 | 4.23 | 4.03 | 3.85 | 3.67 | 3.52 | 3.47 | 3.3 |
a=4 (t) | 4.63 | 4.38 | 4.16 | 3.96 | 3.78 | 3.6 | 3.45 | 3.3 | 3.23 |
Images of Tower Crane
FAQ about Tower Crane
Q: What kind of steel used for tower crane ?
A: Normally, as for the main force bearing steel structure, Q345B is adopted; as for the assistance force bearing steel structure Q235B is adopted. All of the raw material is outsourced from qualified steel factory in China.
Q: What about our tower crane warranty?
A: Usually there is one-year quality warranty including main electronic parts (not including consumable parts). There are consumable spare parts together with whole machine and normally they are enough for one year.
Q: What is 3 main mechanism of the tower crane ?
A: there are trolleying mechanism/ slewing mechanism/ hoisting mechanism.
- Q: HSE Officers can better answer this question or a qualified Crane operator it self can explain.
- each crane is so different. it depends on the rated crane load, the lifted distance from the crane and actuall load to be lifted. Each crane an envelope of angles to the horizontal, lifted load, and distance from the crane. The crane operator must insure that he is within this envelope or the crane may topple over. Also, the wind at the time of the lift must be considered. If you can picture a seesaw with loads pivoting about a fulcrum. When two people are on the seesaw, one person is the crane and the other is the load to be lifted. Only in the case of a crane, the fulcrum is at the crane itself with a large dead load counter weight behind the cab operator.
- Q: what is the common cause of crane accidents
- Overloading,crane outriggers not properly deployed or on soft ground, gust of wind causing load to sway out of control, operating too close to power lines, worn cables, mechanical failure.
- Q: I have seen a crane sitting in a tree watching over the pond in my front yard. I have never seen any fish in the pond and so i am curious as to why the crane is there. I thought cranes only hangout by ponds if there are fish. Does anyone have an research hypotheses to why the crane is there?thanks in advance
- maybe it's nesting? it's migration season so it might just be a stop-over. where are you? we saw sandhills go over a few weeks ago over oak park IL about a month ago.
- Q: the title. the battery --- 9.6v 2000Mah INT NIMH Crane Stock Battery. will this fit in an echo 1 crane stock? the desc. said its designed for GG and SRC crane stocks, but may fit in other crane stocks.
- yeah, all crane stock battery's are pretty much interchangeable.
- Q: Do self lifting tower cranes allow a small swing of the boom in jacking operation?
- The upper working structure of the attached tower crane is connected with the jacking sleeve frame, and a jack jack is mounted on the top lifting jacket frame.
- Q: is this normal? I mean VERY VERY afraid. I mean i won't scream but if i see a someone (except other guys) i will hug them tightly and beg for them to kill them... and how can i change this?
- everyone has fears youre either going to have to face them or learn to live with them
- Q: is the elevation of the upper surface of the tower crane foundation flat with the elevation of the bottom of the new building? Or lower than the trough bottom elevation? ThirtyI think this is better. Please specify which specification has the relevant regulations. Which page is it? Thank you very much！
- There is no standard in the tower crane foundation and building foundation, there is no such provisions.In fact, you can do whatever you can. The only factor that can be said is the Design Institute, to see if they agree.Design Institute to consider this problem, generally disagree, you let the two based on the surface flat, because there is a stress concentration problems. It's like a pebble under your mattress. So, in general they will demand based on the surface in the construction of tower crane foundation floor, the middle 30-50cm gap with soil pad.Of course, no matter which of these two methods you have to use the back belt to enclose the tower crane foundation.
- Q: I was looking at the glidecam hd1000 for my canon vixia hv40, but now I think I'm more interested in a crane (jib).I was thinking of the advance digital 6 ft. crane. I would replace some of the plastic parts for metal.I'll be using it to film sketches and short films. (my budget is 350 dollars, but id like it to be under that)the crane is 200 dollarsthe glidecam is 370 dollars (on amazon)Thanks,Mike
- Yeah corner of foremost and Higgins. Just isn't all love bought at one time or one other. We have now the love that may be purchased on the street however even in eveyday existence is just not love purchased by means of gifts, dinner, it will not be what we call soiled love however it's still purchased. Wheather it can be a man shopping for a woman or lady for man. Take care dave PS nothing is free.
- Q: Is it through the rails? if so, then how? or is it by another method?
- Hot rails running along side the beams Hot shoes on the crane make contact with the hot rails and slide along the hot rails. Hot rails mounted to the beams by insulating bells. The hot rails can be anywhere in size from trolley wires to rails the size of railroad track rails. AC cranes are usually 3 phase so they will have 3 hot rails. DC cranes will usually have just 2 hot rails. Main disconnect/lock out feeds hot rails. It is usually fused but can also be just a disconnect switch. The same arrangement also is used on the crane's trolley. But in the case of the trolley one set of hot rails feeds the trolley motor. One set of hot rails feeds the main hook {big hook} motor: One set of hot rails feeds the auxiliary hook motor {little hook} motor. If the crane is also used as a Mag crane {Electro magnetic can be used} it will also have a set of hot rails going to the trolley for the magnetic
- Q: how do u build a hydraulic crane using syringes. it's a science project. can u give me websites or if u know details.
- Do okorder
Send your message to us
Tower Crane TC6520 VFD PLC New Technology
- Ref Price:
-
$10,000.00 - 50,000.00
/ unit
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 30 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
