SIH:S hydraulic system Excavator SH330-5/SH330LC-5
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of excavator:
Engines in hydraulic excavators usually just drive hydraulic pumps; there are usually 3 pumps: the two main pumps are for supplying oil at high pressure (up to 5000 psi) for the arms, swing motor, track motors, and accessories, and the third is a lower pressure (700 psi) pump for Pilot Control, this circuit used for the control of the spool valves, this allows for a reduced effort required when operating the controls.
The two main sections of an excavator are the undercarriage and the house. The undercarriage includes the blade (if fitted), tracks, track frame, and final drives, which have a hydraulic motor and gearing providing the drive to the individual tracks, and the house includes the operator cab, counterweight, engine, fuel and hydraulic oil tanks. The house attaches to the undercarriage by way of a center pin. High pressure oil is supplied to the tracks' hydraulic motors through a hydraulic swivel at the axis of the pin, allowing the machine to slew 360° unhindered.
The main boom attaches to the house, and can be one of several different configurations:
Most are mono booms: these have no movement apart from straight up and down.
Some others have a knuckle boom which can also move left and right in line with the machine.
Another option is a hinge at the base of the boom allowing it to hydraulically pivot up to 180° independent to the house; however, this is generally available only to compact excavators.
There are also triple-articulated booms (TAB).
Specifications of excavator:
Arm length | 2.63 m | 3.25 m | 4.04 m |
---|---|---|---|
Boom length | 6.45 m | ||
A ( Max.digging radius ) | 10 670 mm | 11 170 mm | 11 190 mm |
B ( Max.digging depth ) | 6 730 mm | 7 340 mm | 8 140 mm |
C ( Max.digging height ) | 10 320 mm | 10 370 mm | 10 670 mm |
D ( Max.dumping height ) | 7 140 mm | 7 230 mm | 7 540 mm |
E ( Max.vertical wall cut depth ) | 5 970 mm | 6 350 mm | 7 150 mm |
F ( Min.front swing radius ) | 4 630 mm | 4 500 mm | 4 560 mm |
G ( Rear end swing radius ) | 3 450 mm |
Working Range
SH330-5 | |||
---|---|---|---|
Arm length | 2.63 m | 3.25 m | 4.04 m |
A Overall length | 11 130 mm | 11 050 mm | 11 090 mm |
B Length from center of machine (to arm top) | 7 710 mm | 7 630 mm | 7 670 mm |
C Upper structure rear end radius | 3 450 mm | 3 450 mm | 3 450 mm |
D Center to center of wheels | 3 720 mm | 3 720 mm | 3 720 mm |
E Overall track length | 4 650 mm | 4 650 mm | 4 650 mm |
F Overall height | 3 500 mm | 3 260 mm | 3 480 mm |
G Clearance height under upper structure | 1 210 mm | 1 210 mm | 1 210 mm |
H Shoe lug height | 36 mm | 36 mm | 36 mm |
I Cab height | 3 130 mm | 3 130 mm | 3 130 mm |
J Upper structure overall width | 3 020 mm | 3 020 mm | 3 020 mm |
K Width from center of machine (left side) | 1 530 mm | 1 530 mm | 1 530 mm |
L Width from center of machine (right side) | 1 490 mm | 1 490 mm | 1 490 mm |
M Track gauge | 2 600 mm | 2 600 mm | 2 600 mm |
N Overall width | 3 200 mm | 3 200 mm | 3 200 mm |
O Std.Shoe width | 600 mm | 600 mm | 600 mm |
P Minimum ground clearance | 480 mm | 480 mm | 480 mm |
SH330LC-5 | |||
---|---|---|---|
Arm length | 2.63 m | 3.25 m | 4.04 m |
A Overall length | 11 130 mm | 11 050 mm | 11 090 mm |
B Length from center of machine (to arm top) | 7 710 mm | 7 630 mm | 7 670 mm |
C Upper structure rear end radius | 3 450 mm | 3 450 mm | 3 450 mm |
D Center to center of wheels | 4 040 mm | 4 040 mm | 4 040 mm |
E Overall track length | 4 980 mm | 4 980 mm | 4 980 mm |
F Overall height | 3 500 mm | 3 260 mm | 3 480 mm |
G Clearance height under upper structure | 1 210 mm | 1 210 mm | 1 210 mm |
H Shoe lug height | 36 mm | 36 mm | 36 mm |
I Cab height | 3 130 mm | 3 130 mm | 3 130 mm |
J Upper structure overall width | 3 020 mm | 3 020 mm | 3 020 mm |
K Width from center of machine (left side) | 1 530 mm | 1 530 mm | 1 530 mm |
L Width from center of machine (right side) | 1 490 mm | 1 490 mm | 1 490 mm |
M Track gauge | 2 600 mm | 2 600 mm | 2 600 mm |
N Overall width | 3 200 mm | 3 200 mm | 3 200 mm |
O Std.Shoe width | 600 mm | 600 mm | 600 mm |
P Minimum ground clearance | 480 mm | 480 mm | 480 mm |
Principle Specifications
SH330-5 | SH330LC-5 | ||
---|---|---|---|
STD Specifications | |||
Base | Boom length | 6.45m | |
Arm length | 3.25m | ||
Bucket capacity (ISO heaped) | 1.40m3 | ||
Std.operating weight | 33 400kg | 34 000kg | |
Engine | Make & model | lSUZU AA-6HK1XYSS | |
Rated output | 202kw/2000 min-1 | ||
Piston displacement | 7 790 ml(cc) | ||
Hydraulic System | Main pump | 2 variable displacement axial piston pumps with regu-lating system | |
Max. pressure | 34.3 Mpa | ||
(with auto power boost) | 37.3 Mpa | ||
Travel motor | Variable displacement axial piston motor | ||
Parking brake type | Mechanical disc brake | ||
Swing motor | Fixed displacement axial piston motor | ||
Performance | Travel speed | 5.5/3.5 km/h | |
Traction force | 265 kN | ||
Grade ability | 70%<35º> | ||
Ground pressure | 67 kPa | 64 kPa | |
Swing speed | 9.6 min-1 | ||
Bucket | 229 kN | ||
/with power boost | 248 kN | ||
Arm | 164 kN | ||
/with power boost | 178 kN | ||
Others | Fuel tank | 580 liter | |
Hydraulic fluid tank | 350 liter |
Images of excavator:
FAQ of excavator:
Q: What are the main functions of excavators?
A: Excavator is the machine that can excavate the the soil of various types forcefully and then using hydraulic system a hydraulic force is generated and utilizing this force bucket is exchange with some other attachments then excavator can be used for multi-purpose. For exemple pile diver, hydraulic jack hammer etc...
Q: What are the main type of excavators?
A: Crawler excavator; Wheel excavator;
Q: What is the application of excavators?
A: The excavator has increased the work speed tremendously. It is used extensively in numerous fields, including the following:
•Wood removal in forests
•Normal grading work and landscaping
•Cutting of brushes with attachments
•Demolition of structures, and removal of debris
- Q:i threw a track and going to try to replace myself
- There is an inspection plate on the side remove that plate and you will see a grease fitting remove it and allow the grease to come out this will release the pressure on the track guide then you can install the track and just reinstall the grease fitting and fill with grease to tighten the track back.
- Q:What about sunward excavator?
- First answer, you sell 31, right? Your mother is responsible for what she says!First of all, I say that I am not the manufacturer, nor is it the company's salesman!I'm just going to stand up and be fair!Each brand has its own living space, it is necessary to attack each other to fight for orders?Cow force out strength!
- Q:200 excavator weight?
- 200 excavator is probably more than 19 tons, like 300 is 29 tons more, like 240 on more than 23 tons. You should find the way, too! Are four homes five, in order to remember well.
- Q:I would really appreciate if the answer made sense :)
- Hydraulic Excavator How It Works
- Q:I always wanted a quad since i was little. i got a job to get money then saved for a year until i moved into the middle of nowhere with lots of quad trails. I cant get a job because I am still to young to get a drivers license and i am in the middle of nowhere. I won a bet that my mom has to purchase me a quad over a year ago, and they wont get me one even though my dad just bought a $15,000 excavator last month! I already tried lots of chores, helping them out, getting good grades and they still wont give me one. I had a Chinese 50cc dirt bike until it died and I am very responsible, and my parents know that. We have a lot of money, so how do I convince them.
- ignore the previous comment. just find a nice used bike/quad on the cheap, show to your parents and let them know how much it means to you and how you're not going to get killed based on your prior experience.
- Q:How interested are you in the following hydraulic excavator improvements? ?Ability to Measure Machine Productivity (Payload, Cycles) ?On Machine Operator Coaching/Assistance ?Machine Protection Improvements ?Machine Security Improvements
- Whoever wrote that meant in, not on. So that choice reads: How interested are you in machine operator coaching/assistance. Hope that helps.
- Q:please let me know
- A heavy equipment operator is needed in several key businesses that I'm sure you know. Excavators, mining companies, construction, demolition, etc. A big part of creating your business is the ability to sell yourself and your services to the right companies. Think of it this way - somehow, maybe not too long ago you applied for a job doing heavy equipment operation. They hired you - why? Whatever you did to convince your employers is also the skill you can use to convince businessmen to utilize your operator services on a contract basis. You should research if contracting as an operator is needed and if it pays more than just going after regular employment. Good luck.
- Q:I have been working on pipeline installation for four years and I'm wanting to work in California as an operator. I can run several pieces of machinery including rough terrain forklift, excavator, bulldozer, bobcat, indoor forklift, backhoe. I live in California but I am tired of being away from family. The money is great out here but money doesn't make me happy no more.. I would like to join a operators union but I have no leads. If anyone can Help I would greatly appreciate it.
- Look for labor unions on Google. Then go to a local hall to find out how much of your soul you'll have to sell to join.
- Q:So, I bought the Rezurrection add on for Black Ops Zombies on Xbox. Everything is going fine and well except there's one huge problem. When I disconnect from Xbox Live (not voluntarily), while playing one of the Rezurrection maps (All of them) the sound cuts out. What I mean by that is that you can only hear the gun firing, the zombies screaming, and thats it. The character doesn't say phrases, you can't hear any elements (i.e the Excavator in Moon), and when going to another round, the sound doesnt play. Nor can you hear the little demon girl's voice when you get a power up or Pack a Punch a weapon. This does not happen in the standard included maps (Kino der Toten, Five, and Dead Ops.) This only happens with the downloaded maps. It's very frustrating and often leads to my downfall in many maps. Any one have any ideas about this or a fix?
- try clearing your cache or deleting and re downloading it. If that doesn't work try calling xbox live and they will help yo fix the problem and make sure everything i plugged in right now fuses are blown and check the sound settings on black ops.
- Q:i have been looking for scopes all day and i just came across the Barska Excavator and it is within my budget and from what i have read it is a pretty good scope. i am looking to mount it to my Marlin .270, is this a good scope and will it hold a zero?
- Barska = Junk ! No more needs to be said.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
SIH:S hydraulic system Excavator SH330-5/SH330LC-5
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords