Self-Regulating Heating Cables Self-Regulating Heating Cables
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction:
The cable is mainly used in mobile communication and radio communications antenna feeder and ground base station antennas with jump line, computer room and antenna with feeder connections, military data information transmission lines, etc.
Use of imported polyethylene insulated cable (including solid core or foam) cable with low loss, low propagation delay, the minimum attenuation.
The cable is mainly used in mobile communication and radio communications antenna feeder and ground base station antennas with jump line, computer room and antenna with feeder connections, military data information transmission lines, etc.
Use of imported polyethylene insulated cable (including solid core or foam) cable with low loss, low propagation delay, the minimum attenuation.
The cable is mainly used in mobile communication and radio communications antenna feeder and ground base station antennas with jump line, computer room and antenna with feeder connections, military data information transmission lines, etc.
Use of imported polyethylene insulated cable (including solid core or foam) cable with low loss, low propagation delay, the minimum attenuation.
Specification:
Self-regulating heating cable has the function of heat preservation and anti freezing. It is commonly utilized in petroleum. chemical. electrical. Offshore platforms and the pipeline.valve.tank.industry reaction tower of civil construction. It need not be connected by any control components, but it can adjust output power automatically depending on the temperature of the materials. Therefore, it can control temperature automatically, and it prevent cable from over-cold or over-hot.
Products' type and name
Type | Name |
15ZKYY-2(2J) | Polyolefin insulated 15w per meter common type(strengthen type) self-regulating heating cable |
30ZKFF-2(2J) | PVDF insulated 30W per meter common type (strengthen type) self-regulating heating cable |
Features:
1.conserve the energy, prolong the usage time
2.It is good at controlling and preserving the temperature, and is corrosion-resistant and easily maintained.
3.It can be installed easily and it is flexible and can wind tightly on any kinds of pipes. It can cut at any place and do not effect using.
4.The temperature performance is stable at different onset temperature. Current time constant is small, and the temperature increase quickly.
5.The metal screening layer is safe earthing wire to prevent static electricity. It not only increase the temperature of the cable, but also transfer and thermal heat.
6. It respond according to the discrepancy and changes and adjust the temperature automatically.
Products' application
Oil industry:
Chemical industry
Rail transport
Power communication
Agriculture and horticulture
Others
- Q: Apparently my computer has a 300 watt power supply. I am wanting to purchase a new graphics card but apparently in order to get a better graphics card then my existing card, Geforce 8400, I need a larger power supply.What will I need to purchase to increase the power supply to 500 watt and is it really worth buying all this? I am thinking I might aswell save up a bit more and buy a new computer.Any help apprietiated, thank you.
- There's nothing you can buy to boost your existing power supply - you have to buy a complete new one. Luckily though power supplies are relatively cheap. You can find a 500w supply for around $30-60.
- Q: Where can I buy a power cable with converter for a Dell Inspiron 2200?
- Try okorder and select your region. Browse there Notebook and Mobility Solutions and they may have what you are looking for.
- Q: I just put a new sound system in my boat with a sony xplod sub and amp, and also an infinity reference amp with 4 kenwood speakers. The problem i'm having is that i had to run the amp power cable right past the right rear speaker and now i'm getting a lot of feedback when the engine is turned on. Is there any way to insulate the power cable so that i don't get that annoying feedback through that one speaker? thanks-Josh
- You have to move that wire away from the spk. is it close to the spk, or is the wire close to the one for the spk? You may be able to block the amp wire from the spk, by placing some wood of some sort between the two( hillbilly I know but...) The other thing you can try would be to wrap the amp wire with a plastic conduit, od a foam like expanding spray foam could shield it. You can also try a magnet ont he power wire to the spk.(that may take the feed back out of it.) Or try them all at once LOL(sorry but it might work) Just try to get the wires as far away from the other as possible. Hope that helps. Cheers Wiretheworld
- Q: Hi. I have a Marina Power Filter (Slimline S15) and the power cable that is connected to it appears to need to be submerged in the water. That doesn't seem safe at all but the instructions (although poorly written) seem to point to that being the case,Advice please.
- It's safe as long as the cable and filter are not damaged. They whole unit is sealed in plastic so the water and electricity can't meet up. Ian
- Q: Hey guys,I am going to build a PC around gaming soon, and i was wondering, how many sata and power cables am i going to need for the build, i can't seem to find it anywhere. By that i mean, will i have to buy any extras? I do not know how many come with the mobo and/or PSU.
- You only really need one SATA cable, for your HDD/SSD. Even then there are some hard drives that don't take it. Usually, a hard drive comes with the cable/strip included in the box.
- Q: I managed to break off the tip of my laptop power cable to the point that I need it replaced. I can't pay with cash on OKorder and don't own a credit card. Anyone know an electronics store where I could find another? Thank you.
- You okorder /
- Q: Copper core power cable laying (cable section YJV4 * 35 + 1 * 16mm2) Will the dawn of the software in how the amount of superposition? The Please master instructions, the problem added: YJV4 * 35 + 1 * 16mm2 is not the 4 * 35 + 1 * 16 = 156mm2 copper core power cable laying (cable section 156mm2) to count, more
- Is the aluminum core armored cable for outdoor high pressure conforming to the specification
- Q: the adapter is fine but the safety pin (the big one) on my power cable broke, do you know where I can buy the power cable for an HP pavilion dv9500 laptop? on the cable it says quot;LS-15 7A 125V LINETEK E70782quot;.also, is it safe to use it although the 3rd pin is gone? it still works but i wouldn't want to fry my notebook...thank you
- Contact HP, this laptop was designed for Vista so more than likely there are no drivers available for xp.
- Q: some one told me that cisco get this router without AC power it get the power from the network cable?
- Let's just clarify a thing or two: Most networking equipment uses AC power. All routers and switches (or, at least 99% of them) must be powered from an AC wall outlet. However, a wireless access point or an IP telephone may receive power from it's attached ethernet cable. Where does the power come from? The device on the other end of the cable must be supplying power through the cable. This is called PoE (power-over-ethernet) and there is at least one IEEE standard for this, and one Cisco-proprietary standard. Typical devices that can supply power are switches (not all switches) and power injectors. A power injector is a palm-sized device that you insert between a non-PoE switch and a client device to inject power into the ethernet cable. The injector must be wall powered to function. Some routers, particularly ISR (integrated services routers) routers can suypply PoE, too. So, usually routers do not receive PoE. Often, switches provide PoE. Usually, access points receive PoE. Make sense?
- Q: 1 or two to use the other ones and its really annoying.. is there something that i can get that can give me more ide cables and also power cables inside the pc as well?
- Ok..listen carefully. If you try to overload your computer with too many peripherals that it is not designed for, you are going to have problems..power supply, being a major one. Yes, you can get another mother board and bigger power supply if you are willing to pay for them. But, if money is an issue, do you really need 2 DVD roms? Do you really need 2 hard drives? If you do, and you are willing to pay for them, so be it. One possible solution is for your sound card. Most of them do not plug into the ribbon cable that also goes to the DVD/harddrive. You could consider another more modern sound card that would not have a ribbon cable, but only a small cable that plugs into the Dvd drive. Bottom line: You have a primary slot and a secondary slot on your motherboard. Your cables have 2 places for a master and a slave. That means 4 peripherals total and you have 5, if you count the sound card, and you need to get rid of at least one peripheral.
Send your message to us
Self-Regulating Heating Cables Self-Regulating Heating Cables
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
