Roofing Insulation Shingles - Aluminum Foil Coated Bubble Insulation FBBF1001

Roofing Insulation Shingles - Aluminum Foil Coated Bubble Insulation FBBF1001 System 1

Roofing Insulation Shingles - Aluminum Foil Coated Bubble Insulation FBBF1001

Ref Price:

Loading Port:: Shanghai

Payment Terms:: TT OR LC

Min Order Qty:: 1200 m²

Supply Capability:: 12000 m²/month

Inquire Now

Add to My Favorites

OKorder Service Pledge

Quality Product, Order Online Tracking, Timely Delivery

OKorder Financial Service

Credit Rating, Credit Services, Credit Purchasing

Aluminum Foil Bubble Heat Insulation

Description of Aluminum Foil Bubble:

Aluminum foil and bubble is the better product in the environmental protection, thermal insulation thermal insulation. The outermost PET has good abrasion resistance and high strength tear resistance. The bubble between the aluminum foil not only has a strong moisture, resistance oxygen, sound insulation, drop noise function, aluminum foil bubble also has very good reflective inverse heat, blocking ultraviolet.

Features of Aluminum Foil Bubble:

It is the high quality heat insulating and the invincible opponent of anti- condensation. The low and stable coefficient of heat conduction has good isolation effect.

The product has many advantages, such as light weight, heat insulation, shock absorption, sound absorption and noise reduction;

The product is easy to install and process and it also waterproof, seepage control, flame retardant.

The product also has many features, such as heat resistance, low temperature resistance, chemical resistance, ageing resistance etc.

Application of Aluminum Foil Bubble:

Building reflective heat, cold and hot water pipe insulation;

Refrigerator partition, central air conditioning, refrigerator and household appliances insulation;

Insulation, sound-absorbing, noise reduction and moisture-proof insulation in the car, train, refrigerator car, laboratory and other industries;

Special product packaging and refrigerated packing and so on

Pictures of Aluminum Foil Bubble

Aluminum Foil Coated Bubble Insulation FBBF1001

Specification of Aluminum Foil Bubble

STRUCTURE	ALUMINUM FOIL/BUBBLE/ALUMINUM FOIL	ALUMINUM FOIL/ BUBBLE/BUBBLE/ALUMINUM FOIL	ALUMINUM FOIL/WOVEN CLOTH/BUBBLE/WOVEN CLOTH/ALUMINUM FOIL	MPET /BUBBLE/MPET	ALUMINUM FOIL/BUBBLE/FOAM/BUBBLE/ALUMINUM FOIL
THICKNESS	1-4mm	8mm	6.5mm	4mm	4mm
WEIGHT	120GSM	240GSM	180GSM	120GSM	445GSM
BUBBLE SIZE	4mm HIGH x 10mm DIAMETER	2mm HIGH x 10mm DIAMETER	4mm HIGH x 20mm DIAMETER	4mm HIGH x 10mm DIAMETER	2mm HIGH x 10mm DIAMETER FOAM THICKNESS: 3.5MM
WIDTH	1.2m (MAX 1.5m)	1.2m (MAX 1.5m)	1.2m (MAX 1.5m)	1.2m (MAX 1.5m)	1.2m (MAX 1.5m)
THERMAL CONDUCTIVITY	0.034w/mo	0.032 w/mo	0.032w/mo	0.034w/mo	5.87m2.k/w
REFLECTIVITY	96-97%	96-97%	96-97%	96-97%	96-97%

FAQ

We have organized several common questions for our clients，may help you sincerely:

①How about your company?

A world class manufacturer & supplier of aluminum foil bubble insulation，is one of the large-scale professional investment aluminum foil composite insulation bases in China, consisting of both casting foundry forging and machining factory. Annually more than 100,000 square meters foil insulation are exported to markets in Europe, America and Japan. OEM service available according to customer’s requirements.

②How to guarantee the quality of the products?

We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.

③How long can we receive the product after purchase?

In the purchase of product within three working days, We will arrange the factory delivery as soon as possible. The specific time of receiving is related to the state and position of customers. Commonly 20 to 25 working days can be served.

④What is the storage condition?

The welded wire mesh should be stored at room temperature and kept from wet and heat source.

Q:on a traditional pitched roof construction,where is heat insulation usually provided?: The insulation is always placed in the rafters, leaving the rest of the attic space ventilated. That's why it's so important to cover every opening with screen to keep birds and animals out.

Q:How do I adequately insulate my attic roof to make the space a bit more habitable in the winter? The floors to the living area below are already insulated and we have a gable mounted fan which is great in the summer. I am thinking of adding insulation to the roof with baffles underneath for air circulation through the soffit vents. Am I anywhere near an idea that may work?: Such an interesting question when you sit down to answer it. First off, if there are any vents to the exterior, its not likely that you will want any additional heat to enter the space, as it will flow out of the vents to the outside and cost far more money than heat that is lost by thermal transfer, through the doors, windows and insulated walls and ceilings. So, any increase in the source of heat would mean closing the system to outside air vents like the fan and the soffit vents. If you want to heat the space, you'll need to insulate the roof by adding fiberglass batting to the space between the rafters and then drywall or panel depending on local building code and your preferences. Then you'll need an avenue for heat to reach the attic which can be as simple as cutting a couple of floor grates through to the heated space below, but you'll want cold air return ducting to send the cold air that is displaced by the heated air back down to the furnace. Then you'll need to seal the gable fan and insulate, perhaps with a box you can remove in the spring and replace in the fall. Now that the attic is integrated in the HVAC system, you no longer need the soffit vents. If you don't have a forced air system, there is less concern about the cold air return, as your heat source would be in the room or you can just use floor grates on opposite ends of the room for both the warm air and cold air exchange. Place one near the heat source below and one well away from it.

Q:I have a split house with an attic where I have insulation on attic floor, but the house seems to be cold still, Can I add insulation to the roof of the attic? If so, any options? Thank you.: Its wide-spread to have a insulated attic.. I once said a neighbor--that used a tremendous exhaust fan..and his roof became bowed.. He also would use alot of firewood in his abode.. i imagine that moisture by some ability--damaged the attic area--/

Q:1) What thickness of rigid insulation is used on flat roofs?: Flat Roof Insulation Thickness

Q:roof was replaced eight years ago soon after there were leaks in the roof caused insulation toget wet then dry now the insulation is packed hard and has started to turn into power who would be responsible to replace the insulation.: Sorry; I don't know of any roofer that would take responsabilty after eight years. Unless your insurance might be an option. Check with them and decide if your deductable is more than the repair if you would be better off doing it yourself. I would also be concerned about underlying materials, sheet rock, lumber, MOLD. You need someone to check thoroughly for mold being as it has been so long. GOod luck; Flip;

Q:Re-roof + gutters + insulationHi. My name is Sean and I live in Adelaide. I want to get rid of my asbestos roof and replace it with a Colorbond roof and new gutters and also R3 ceiling insulation. I've had 1 quote so far for $17,000 total costs, and 1 quote for roof removal only which was $3,300. Does anyone know if I can get a cheaper quote but still get a good job done please?Roof area: 160m2 approx.Gutters: 25 linear metres approx.Capping: 52 linear metres approx.Cheers.: I am a roof plumber in melbourne I think this is a reasonable price. Materials will cost approx 8000-10000 grand 3300 for asbestos removal and the rest for labour. The best advice is plenty of quotes and keep them to their quotes. If you can get a roll of metal direct from bluescope you can get a company like apex roofing to roll it for you but it is alot of mucking around to save a little bit

Q:I am building a porch roof over an existing patio. The rafters are fabricated I-beams. I plan on putting aluminum soffit under the I-beams. On top of the roof I would like to put down a metal roof. I already put down 3/4&quot; OSB and a rain/ice barrier. Do I need insulation and/or ventilation on top of the rain and ice barrier, or can I get away without it?: You don't need insulation for this application. If you haven't purchased the metal yet I would recommend looking for a standing seam roof system that the panel does not come in contact with the substrate and does not use exposed fasteners. If in the future you did decide to enclose the porch and add heat you could insulate the ceiling and leave an air space under the decking that could be ventilated from the eave to the ridge. A cold roof assembly with proper ventilation will dramatically reduce the potential of the metal panels sweating.

Q:I have a converted loft which is really cold. The roof doesn't have any insulation, just a waterproof sheet, but i don't want to spend too much insulating it with the proper boards. If i use mineral wool and staple it across the roof trusses will it do a good job?: Yes, be sure to leave an air space between the top of the insulation and the roof deck to allow for ventilation, and use a vapor barrier on the interior side of the insulation.

Q:House is a bi-level. Recently added storm windows to deck off dining room. Having a new rubber roof installed would like to know if we can insulate ceiling to make the room warmer. What product do you suggest we use. we are getting conflicting answers, some say you can insulate others say the ceiling needs to breath having a rubber roof install. Please advise.: Yes, you can. There is a little plastic piece that you will want to tack to the underside of the roof though before you install your insulation. It is a plastic air vent that keeps about an inch or so of space between the roof and the insulation so that air can move through. You need to do that so the roof can breathe as they say. If you don't allow it to breathe, the difference in temperature from outside to inside will cause the roof to sweat and will make your roof go bad a lot quicker.

Q:we have liq. ammonia storage tank (capacity 40000 ton)having double wall & suspended deck.liq. NH3 stored at temp -33 degree cent. insulation (form ) being provided to annular space (wall ) but not on top roof . can you explain for exact reason.with regardsanvar shaikh: Insulation is less necessary on the roof. The ammonia is mostly a liquid, and a liquid would absorb heat rapidly from tank walls. Above the liquid is vapor, and vapor absorb heat much less rapidly than liquid does, so insulation is less important there.

1. Manufacturer Overview
Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates
a) Certification Name
Range
Reference
Validity Period

3. Manufacturer Capability
a)Trade Capacity
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range