Roofing Insulation Panels with Heat Reflective Membrane and Aluminum Foil Non-Woven Fabric
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Heat Refletive Membrane with Aluminum Foil and Non-woven Fabric
Introduction:
Aluminum Foil Thermal Reflective Silver Membrane is consist of aluminum foil lanimated with PP/PE non-woven fabric. It is wildely used on roofing and wall protection. it plays a significant role on heat insulation and vapor barrier.
Speicifcation:
Name | Vapor Barrier Reflective Membrane |
Appearance | Sliver/Customized |
Structure | Aluminum Foil/PP or PE Non-woven Fabric |
Width(cm) | 80/100/120/125/150/160 |
Length(m) | 50 to 2500 |
Unit Weight | 120g/m2 |
Tensile Strength(MD) | 200N/25mm |
Tensile Strength(CMD) | 250N/25mm |
Reflective | 91%~92% |
Treatment | FR/UV/VCI/Perforated available |
FAQ:
1. Where is your factory located in?
Factory is located in Jiangsu Province, Neat to Shanghai Port.
2. How long have you been in this product production?
We have been in the business more than 10 years,
3. Can we have some sample or trial order before bunk order?
Yes, we can provide you some free samples, and for trial order, we will offer you the lowest price.
- Q:I am specifically considering the re-roofing of a an older home where rafters were made with 2x4 or 2x6 and the rafter space (and possibly the attic space) does not allow sufficient space for insulation and proper ventilation behind the insulation. The old layers of roofing have to be removed in any event. At this point I am considering applying insulation boards on the existing sheathing and then a new layer of sheathing before the new roofing material. (similar to a SIP: structural insulated panel) The two issues I am concerned with is that the insulation can act as a vapor barrier. Would condensation potentially rot the lower sheathing. How is this avoided in SIP roofing panels? The second issue may be with fire regulations.
- Good question and I do not know the answers. For the fire issue, call your local fire department and chat them up. Then call your building inspector and talk with him. If he's been around awhile he may have seen it done before and have some information on how it has worked out or what are must do's.
- Q:We have plenty down at the center, so many, you can carpet a garden. So, since I'll have to tear down the roof and improve the insulation in a few months, I was thinking of adding one extra layer... of emergency blankets. Since they can reflect the sun's heat up, and the heat under it down, will they do that for a whole house? Will the plastic film cause water condensation? If you wouldn't recommend it, then what would you recommend?
- They may help, but as thin as they are, installing them would be about as easy as putting socks on a rooster!
- Q:This is blocking airflow and I'm having it removed after I bought the house. There is already insulation on the attic 'floor'. This is double insulated and is not correct. Why would anyone do this?
- No building codes back then, and maybe he was thinking about putting an extra room up there then you would have to insulate the rafters also
- Q:Can I install rigid insulation between roof decking and shingles on a sloped roof?
- Lot of info missing to give you a good answer. Thickness of insulation. Slope of roof. But what it really comes down to is the building code in your area, contact local building inspector,
- Q:I am building a porch roof over an existing patio. The rafters are fabricated I-beams. I plan on putting aluminum soffit under the I-beams. On top of the roof I would like to put down a metal roof. I already put down 3/4" OSB and a rain/ice barrier. Do I need insulation and/or ventilation on top of the rain and ice barrier, or can I get away without it?
- Its a outside patio, are you going to enclose it for living space? If not don't bother to insulate and for ventilation there is soffit that comes with vent holes in it. Add; no it will not cause a moisture problem, i had a patio with a open bottom metal roof and had no problems and i live in Florida.
- Q:a roof that is built with the insulation covering the waterproof membrain is ?
- Not done properly.
- Q:I have a converted loft which is really cold. The roof doesn't have any insulation, just a waterproof sheet, but i don't want to spend too much insulating it with the proper boards. If i use mineral wool and staple it across the roof trusses will it do a good job?
- Yes, be sure to leave an air space between the top of the insulation and the roof deck to allow for ventilation, and use a vapor barrier on the interior side of the insulation.
- Q:How do I find roofers who are specialised in protection against invaders from outer space. I called 10 and they said they would call me back, but no one did so far. It must be really complicated.
- Don't fall for this SCAM! Everyone knows that lining your roof with aluminum foil acts as an antenna. Making it easier for those little gray bastards to track your every move. And most roofers are in cahoots with those outer space nar-do-wells This myth/propaganda was originally disseminated by the Inter-Galatic Agency for Human Anal Probing (AgHAP). I first became aware of this little plot after dealing with roofers for many years as a GC. After only a brief conversation with anyone on a roofing crew and you can only assume there are from another plant.
- Q:Can you put fiberglass insulation on the under side of roof tiles in the loft in the house?
- I would be concerned that this may cause moisture to form between the roofing and the insulation. They make a special foam panel that fit underneath the roofing in between the roof rafters. They allow air to flow from the eave to the roof's ridge.
- Q:Are black concrete roof tiles for my house uncomfortably hot even with roof under sheeting and insulation?
- I wouldn't get bogged down by it. It depends on you're area and what you want to use the loft for. But the insulation will keep it ok inside. Just add some air bricks to encourage ventilation. This will keep you're heating bills down, and unless you're going to be living in the loft I really wouldn't worry. There are a lot of variables to consider. Just stick you're logical head on and you'll find your own answer. Just consider what the Canadians say; "Insulate tight and Ventilate right".
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Roofing Insulation Panels with Heat Reflective Membrane and Aluminum Foil Non-Woven Fabric
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2000 m²
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords