PVC-u Windows, Plastic Windows with Double Glass
- Loading Port:
- Dalian
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 300 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Place of Origin: | Liaoning, China (Mainland) | Used for: | pvc casement window | Model Number: | the finished windows |
Frame Material: | Plastic | Open Style: | inward and outward | Quality Standard: | ISO |
Opening Pattern: | Horizontal | Chambers: | 3,4,5,6 | Color: | White , etc. |
Basic deptah frame: | 60,65,66,70mm | Hardware: | Germany Roto, Siegenia-Aubi, Chinese Top Trademark-KinLong | Rubber Strip: | EPDM with Black Color |
Glass: | Single, Insulated, Low E, Laminated, ect | Trade Term : | EXW,FOB,CIF | Reinforcement Steel: | 1.50 mm or 2.00 mm for PVC Windows |
Payment Term : | T/T ,L/C | Package: | standard export carton package or as per customer's requests | Loading: | 20'GP about 10 tons 40'GP about 20 tons 40'HQ about 23 tons |
2. Specifications
Attractive appearance
Simple and bright facades
High strength,good rigidity
Durable
Light and flexible open an close,
No noise Sealing well.
3. Packaging & Delivery
Packaging Detail: | PVC Windows Packing: Carton Box |
Delivery Detail: | within 4 weeks for PVC Windows after receving the 30% deposit of T/T or L/C |
Sample shipping. Sent out orders in 24 hours by TNT, DHL, EMS FedEx etc.
By air (DHL, FedEx, UPS, etc.)
By sea shipping when bulk order
A). Sample's lead time:1-2 days
B). 20'GP lead time: 5-8 days
40'GP lead time: 8-15 days
40'HQ lead time:10-15 days
- Q:Should I insulate just my single pane windows or my new windows as well? Also should I put the plastic on the inside, outside or both? Thanks.
- Plastic on the inside. Putting it outside will subject it to wind and weather. It will be noisier and will not last all winter. If your new windows are double or triple pane, I would not do them. Look for places where drafts come in around windows, doors, fireplaces. Many of these can be sealed with caulk and are very efficient.
- Q:i have 2 windows that are always wet in the winter. will putting plastic insulation over them help this problem?
- well, no not at all. The only thing we use plastic over windows for is trying to prevent drifts in the winter.
- Q:i got mad and threw something a my widow and one panel broke so how do i reinforce that otherpanel
- I have repaired CRACKED window panes. It's important that none of the glass fell out, AND that all the cracked edges fit to each other tightly, AND are flush with each other. When all the pieces are flush [flat to each other, and in the same 'plane'] I VERY GENTLY AND CAREFULLY squeeze Super Glue ONLY INTO the cracks. IF one is very careful, surface tension 'draws' [sucks] the glue into the crack without leaving any excess on the glass surfaces to mar the appearance, AND if done properly, when cured, the glue 'disappears,' and the crack almost disappears. The Super Glue not only 'hides' the crack, but it also reinforces and waterproofs the joint. I do not know how long this 'fix' will last because the Ultraviolet in sunlight MIGHT degrade the glue, but if it should, one could always just 'run another bead' of glue.
- Q:I am looking for the plastic parts / clips that attach the glass pane to the cables of my car's window regulator. I can't find them individually. Specifically, I need them for Audi, BMW or Volkswagen (VW). Thanks
- Window Regulator Clips
- Q:There is a tear in my drivers side window at the bottom where the plastic is covered by the fabric, but the fabric is coming lose and the tear is starting to show and open itself to elements. Also, this window zipper only closes and opens one way, going the other way the teeth will not connect, any ideas? Also, there is a larger 4-5 inch tear in my rear plastic window right under where the zipper releases the plastic from the fabric. Any advice would be greatly appreciated.
- There are some kits available for making repairs for clear plastic, you probably will not find them at an auto supply, but, at a place where supplies are sold for any inflatable items, air mattress,floats,etc. These clear repair kits come with an adheres and once in place it is there to stay. On the large tare on your back rear windshield, you may want to place a repair sheet on both sides. Also you may consider sewing it with clear fishing line. As far as you zipper is concern, you can replace the zipper pull, this may or may not solve your problem. Hope that some of the above is of some help!
- Q:I have a plastic windshield that I want to tint, but have run into some problems. I tried getting a tint shop to place a film over it, but the surface was too curved. Is there another method that I can try? Is there any kind of spray or dye? Also, I would like mirror tint. Is that possible? The plastic can flex a little, so it has to be able to withstand that.I don't have to worry about whether or not the tint complies with the law. So, there are no restrictions.
- I just would check with a different tint shop. I ran into that issue with my rear window on my car. A few different shops said they couldn't do it because of the size and how curved it was. Bottomline they just didn't want to go through the hassle. I found a shop that was willing and it turned out great. As for the spray tint VHT does make a product called night shades. I've seen it used with mixed results. On something small like taillights it good. But for a a large window you might have issues with consistent coverage. The tint might look blotchy when your done. Once again I would just look at finding a different place to do the tinting for you.
- Q:what do i do to make the plastic thats supposed to keep the chill out on the windows stay on. it keeps falling down? i followed the directions. now what?
- All depends what you used to attach it and what the surface u are attaching it to is made of. First make sure the trim isn't bowed then use either a builders adhesive ( if necessary tape it to window with masking tape until it goes off ) or a thick gel-type superglue and stick this to the frame where it should overlap.by a few millimetres, The trim is not what keeps the draughts out as the gap around the frame sholud be filled with foam or silicone. The trim merely hides the gap and provides a neat finish
- Q:Is plastic on my windows just as good a drapes for the winter?
- Much, Much better -- and wait -- 3M makes a plastic just for windows -- just get right size -- cut to size, tape, and use hair dryer on it to tighten it. I'm telling you that people can't even see that it is there. I've had it on a 6' X 4' bay window in living room and left it up during summer it was so invisible. It's clear as a window and tight as hell.
- Q:will any type of plastic work for insulating windows?
- Yes, as long as you can seal the edges well enough so no air can get through to the space between the window and the plastic. That air space is what does the insulating, so if air can pass through it there's not a lot of point in using the plastic, unless you have old windows that are extremely drafty. In that case, anything that slows down the escape of heat will help to some degree.
- Q:I have a 4quot; tear in the plastic drivers side window. Are there any adhesives or techniques to fix it?
- Unfortunately, any repair will be only temporary, and you will never be able to do an unnoticeable repair. Some very good clear packaging tape on either side applied on a warm sunny day, perhaps even followed by some mild heat from a hair drier.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC-u Windows, Plastic Windows with Double Glass
- Loading Port:
- Dalian
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 300 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords