PVC Window and Door Factory with Double Glass
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Structure of PVC Window and Doors
Aluminum Window and door can be used for many buildings ,have many types : aluminum sliding , hung window , casement window ect ,have double ,trial tane ,clear and Low-e glass .it's very beautiful , durable and new design .2,Good sound insulation
2.Main features of PVC Window and Doors
Combination PVC casement door with PVC panel and glass
- Excellent waterproof and thermal break
- Utmost energy efficiency and insulation provided by the unique 3-cavity and 2-seal design, the thickness is 2.5mm.
- Beautiful and elegant appearance with decorative grids. Stronger reinforcement offers higher wind-load resistance.
- Easy fabrication, superb water and air tightness Hardware configuration: Friction hinge + handle +transmission or drag hinge + handle +tcorners for strength and weatherability Complete with Screens.
3.PVC Window and Upvc Windows and Doors Images
4. Pvc /Upvc Window and Door Specification
Product name | PVC sliding door | ||||||||
Profile colour | White,Ashy,Brown,Double colour co-exstrusion,Wooden laminated etc. | ||||||||
Size | Available in any sizes as per your needs. | ||||||||
Glass options | 1) Type: clear,tempered,reflective,coated,decorative,floated,Low-E glass etc. | ||||||||
2) Thickness: single glazed /double glazed /triple glazed | |||||||||
4mm,5mm,6mm,19mm(5mm+9A+5mm),31mm(5mm+21A+5mm); | |||||||||
,24.76mm(5mm+0.76mm+5mm+9A+5mm)…… | |||||||||
Hardwares | 1) Imported hardwares like: Germany RoTo,G-U, | ||||||||
2) Chinese top brand hardwares . | |||||||||
Mosquito screen | Made of nylon or metal net | ||||||||
Accessories | Reinforcement steel:1.2mm,1.5mm,2.0mm | ||||||||
Sealing rubber strip:EPDM | |||||||||
Certificated | ISO9001:2008,ISO14001:2004,OHSAS18001 | ||||||||
Tech data | 1) K-value of window: 3.03 w/ m2. K | ||||||||
2) Air permeability: 1.7 m 3 /h. M | |||||||||
Product features | 1) Air proof,Water proof,Sound insulation,corrosion-resistant | ||||||||
2) Availability in variety of colors,does not need painting or varnishing | |||||||||
3) Environmentally friendly, Energy Efficiency,Thermal insulation | |||||||||
4) Anti-aging & Anti-Rust | |||||||||
5) Fire resistant | |||||||||
6) UV protection - will not fade or discolor | |||||||||
7) Easy to install, easy to maintain,easy to clean | |||||||||
8) Condensation free | |||||||||
9) Occupy little space | |||||||||
10) Bright and airy room, Bring you peaceful and comfortable living condition | |||||||||
5.FAQ
What's the steps of PVC UPVC Window and Door construction
Aluminum or PVC (UPVC) window is being made from Aluminum or UPVC profile, window accessories and glass.
To produce an Aluminum or PVC window you have to do the following steps:
1) Cut the profiles (Aluminum or uPVC Profile, reinforcement and Glazing bead)
2) Put reinforcement profile inside the uPVC profiles
3) Screw reinforcement profile into PVC profile
4) End mill the mullions
5) Open holes for door handles, sash fastener channels and espagnolette
6) Weld uPVC profile or Crimping Aluminum profile
7) Clean the welded corners of uPVC windows
8) Assemble window
- Q: I just had my 30 yr old storm windows replaced with nice double pain, double glazed, argon filled windows in November. HUGE IMPROVEMENT! But now that i am used to comfort level and energy savings that these windows have made to my home. I find myself looking for the tiny amounts of cool air that penetrates into my home. And I still have this habit of wanting to put plastic over my windows. Do you think adding the plastic now would be overkill? Or would the energy savings still out way the cost of the plastic this first week on January?
- I think you would be wasting your money. Wait until spring and then go outside and caulk around your windows if you see holes
- Q: ..The cardboard part is recyclable, the twist ties are reusable, wrapping paper and ribbon have reuse or recyclable value. I can't think of what to do with the plastic part.
- Regular trash unless the type of plastics is clearly labeled.
- Q: My windows seem to be extra drafty this year... It seems like one of them is open, but I can't find anything wrong with them. Anyhow, my heat is kicking on like every 15 minutes! I don't wanna get a $300 gas bill every month till winter is over... I'm thinking about putting plastic up on the windows --- How do I do this? What do I use?It seems so ghetto, but oh well.I live in an apartment building too btw..
- just google DIY shrink for window for information. it should help a lot ;even if you could not feel a breeze. It would be like having a thermal /multi pane window. do it to all your windows.
- Q: I'm about to move into an apartment room that I have been warned gets very cold in the winter (I live in MN). However, the person telling me this also mentioned that the windows had not been plastic wrapped the previous winter. In her opinion, however, plastic wrapping the windows would do no good because according to her quot;you can actually feel the cold coming up through the floor.quot; I think it's possible though that what she felt coming in through the floor was actually the drafts from the window sinking to the ground and spreading. Would plastic wrapping my windows eliminate this problem? Or would the room still be cold/I should request a different one? Thanks
- The glass itself? No. It needs an air barrier between the plastic and the window.. So basically you put plastic on the sill and walls, covering the window over all, and yes, that does work. I do it on my bathroom window during winter. Because it gets freekin' cold. Nobody likes taking a hot shower, then walking out of it nude in to Antarctica..
- Q: and where can i get it? I remember my dad did this to our windows growing up and it was like shrink wrap for them and he had to use a hairdryer....any ideas where i can get it and does it work?
- Frost KIng and 3M make these window film treatments that you are talking about...You can buy either one at a home depot/Lowes/Menards /Ace Hardware or True Value. YOu are correct ...Use a home hair dryer after apllying the film to a clean perimeter of the insde window and it will shrink to a drum tight and air tight enclsoure. Come spring time you simply need to peel it off and you are back to the summer mode...HOwever you will have to re purchase again for next winter..But for the price you get a lot of value...The 3M is by far the superior product due to the adhesives used on the border and the mil thickness of the palstic...Of o =course you pay more as well ..
- Q: There is a tear in my drivers side window at the bottom where the plastic is covered by the fabric, but the fabric is coming lose and the tear is starting to show and open itself to elements. Also, this window zipper only closes and opens one way, going the other way the teeth will not connect, any ideas? Also, there is a larger 4-5 inch tear in my rear plastic window right under where the zipper releases the plastic from the fabric. Any advice would be greatly appreciated.
- They have replacement windows and doors at very affordable prices and will ship them to you.
- Q: So I have a 88 celica convertible and the back window is made out of plastic can not see anything out of it. I replaced it a few years back havent driven it in a while now you cant see out of it. Is there something out there I can use to clear it up?
- The alcohol destabilized the outer layers of the plastic there is not any longer any element that i be conscious of of which will restoration it we could ask the innovations of reason whats to do ...Mr. Hawkens? your verdict ?
- Q: I am talking about the stuff you tape to the inside of your home windows and use a hair dryer to stretch it tight. It is supposed to keep single pane windows better at keeping in the heat. I live where it gets 30 degrees at night and 40-50 during the day in winter. Does anyone have experience with these products? Which type works best? Mainly, does it really keep heat in? OR does it keep sunlight heat out and balance out to zero help?
- Yes it can make a HUGE difference. In college, I lived in an old drafty house with 6 other friends. Our heating bills were astronomical and you could literally feel the wind blowing through the windows! We shrink-wrapped the windows and immediately noticed a change in the temperature in the rooms. Our heating bills dropped by 30% over one month. Windows typically account for 10-20% of the heat loss in a house. Even if you have double-pane windows, they still get cold, leeching heat out of your room. The plastic sheeting will help by creating a partial vacuum between the window and the plastic which acts as an insulator (this is the same principle those old metal glass thermos bottles use.) This helps keep the heat in, and the cold out. Sunlight still passes through, but not the heat from the sun. That's mostly blocked by the vacuum between the plastic and the window. Double pane windows do most the same thing - only the space between the panes is filled with Argon gas, which is a poor conductor of heat and cold. The only downside is that the sticky tape these kits use may damage paint when removed - assuming you can remove the tape at all. You'll also need to purchase a new sheets for each window each year. Other alternatives include making sure there are no holes or cracks around your window frames. Use a caulk gun to fix these problems, just don't caulk the windows shut! :-) Caulk guns are cheap, and you don't need an expensive tube of caulk - even the $0.99 tubes of painter's caulk will do the job. (it also work wonders against keeping bugs out of your house, but that's for another time.) Covering the windows with heavy drapes will also help, but isn't as effective as the plastic sheeting. However, every little bit can help. Drapes also help in the summer by helping keep heat out of your house.
- Q: Can you use glass chalk on jeep windows (the plastic ones)?
- dont do it. glass chalk is for glass only. it says so on the packaging and the name GLASS CHALK. i assume you're talking about the soft top windows and it will ruin them.
- Q: I have got a lot of paint on my UPVC window frames want to use white spirit to get it off. Will any harm come to my window frames?
- It should be fine, it is stored in plastic containers.
Send your message to us
PVC Window and Door Factory with Double Glass
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT or LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
