High quality Control Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Control Cable
Introduction
Control cable include PVC and XLPE insulated control cable, flame-retardant control cable and high-temperature resistance control cable. The control cable is mainly designed for controlling, monitoring circuit and protective lines with AC rated voltage U0/U of 450/750V and below. It is used to interconnect electric advices and instruments between electrical equipment.
Characteristics
1. Power frequency rated voltage Uo/U :450/750V or 0.6/1KV
2. The permissible long-term maximum working temperature of the cable conductor is 70 ℃.
3.Cable laying ambient temperature should not be less than 0 ℃, if the ambient temperature is below 0 ℃, the cable should be preheated.
4.The recommended bending radius for cables is as follows:
No armored cable, should not be less than 6 times the cable diameter;
Armored or copper tape shielded cable, should not be less than 12 times the cable diameter;
Shielded flexible cable, not less than 6 times the cable diameter.
Introduction of our company
Our company is a professional China Wire and Cable Manufacturers, mainly supply Aerial bundled cable,House Electric Wire, Insulated Overhead Cable,Aluminium Conductor Steel Reinforced, PVC Control Cables,XLPE Power Cables,BV Electric Wires,Nylon Sheathed Cable,Buried Cable,High Voltage Cable,House Electric Wire,Single Core Flexible Copper Cable,Civil Wire And Cable etc. series of wire and cable products, sincerely welcome everyone to visit.
- Q: Copper cable 3x50 cable can bring the number of kilowatts
- You say the phenomenon I know, you do not worry, because the interface is connected with a thread, the cement in the sand is not get in, can only go into a small amount of cement slurry, and mud in the cement itself Put the gap between the interface blocked, and can not finish into the inside, rest assured, you said the phenomenon will not appear.
- Q: I just bought Bose Companion 2 Speakers and when i hook them up to my tv, I cant control the volume with the tv and I have to manually turn the volume dial on the speakers. Is there any way I can change the settings on my tv so I can control the volume with the tv?
- Bose Companion 3 Volume Control
- Q: Will the control of special cables, control cables, power cables, what is the difference between the three
- Automatic control cable: refers to the automatic control signal type cable, generally multi-strand copper core cord, mainly for the transmission signal, the cross-section is small, mostly 0.25 to 1 square millimeters of small lines, 10 to hundreds of cores Control cable: refers to the transmission control signal class cable, generally multi-core hard wire, transmission control signal is generally used 1.5 ~ 2.5 square millimeters, the transmission voltage signal is generally used 2.5 ~ 4 square mm cable, transmission current signal is generally used 4 to 6 square millimeters of cable, 4 to 36 cores, and the number of cores is relatively rare. Power cable: we often say that the power cable, transmission of electrical hard copper or aluminum cable, 1 to 5 core, single-core cross-section 16 to 600 square millimeters.
- Q: I took it to the dealer once before and they said the cruise control cable slipped on the accelerator. Its doing it again i need help locating it and getting it from sticking please help anybody.
- The cruise control servo is near the a/c filter RH side engine compartment. You shld be able to locate the cable going to the throttle body. Just near the RH fender and engine firewall corner.
- Q: Does anyone knows how to remove the cruise control of a 92 honda accord lx and how can i relocate the battery on the trunk??
- it might desire to be a fuse or loose cable interior the wiring of the cruise controllerthe appropriate element to do is pass to the broking to examine it out, besides the reality that it might desire to be extremely pricier in spite of the undeniable fact that it rather is properly worth on the tip. much less project and funds spend on the tip
- Q: hi anybody who can help ive fitted a kenwood stereo in replacement of my factory fitted tape stereo i still want to use the steering wheel remote control as it doesnt work now.do i need a code? adapter? plug osmething in? all help appreciated cheers
- Yeah it can be done, but you need a 'Control Stalk' cable (the name may vary! I've come across a few names for these cables). Basically, there was a cable which connected from your steering wheel to your old stereo (which allowed you to control it), and now there is nothing to connect this cable to your new stereo. So what you need it: A control stalk specific for your car (Renault Clio 05for example) and then a Kenwood control stalk adapter. The car-specific cable will plug in to the existing cable which once plugged in to your old stereo, and the Kenwood cable will plug in to your Kenwood headunit. You will then connect these 2 cables together and hey presto!
- Q: I want to install 2 VCR's to one TV. I have one GoVideo player, and one Panasonic player, going to a Hitachi TV. I want the GoVideo to be on one channel, and the Panasonic to be on another. Note that I have the PS2 going to Input 2. The way I have it setup now is that on Channel 3, there is audio and video, but on Input 1, there is only video. I only want to use Coax, S-Video, and RCA cables. I need specific help, and please tell me what exactly to connect, and where to connect it (in or out). I want one VCR going to one channel, the other VCR going to another channel, and the PS2 having its own channel. I DON'T want it setup for in order for one VCR to go on, the other one has to go on. I want each to have its own channel.
- television has 2 scart sockets a million is going from digital field to television a million is going from disc participant to television then your television could swap right away to disc mode once you swap the disc participant on or you will could use source button on distant to observe a different participant
- Q: Power cable and control cable with the ditch laying, cable ditch 50 meters long, only the middle of a space is too narrow, where the partition how to do the best?
- This is to buy a adapter on the line, 4-pin to 15-pin
- Q: I get sound but cant control with tv
- The volume control will not change anything on the Red White audio output jacks. The external unit, such as a surround sound sound system, that the RW cables are connected to will control the volume.
- Q: i just bought a new sanyo hdtv and hooked the cable box up to it. cablevision's remote is changing the channels through the cable box but it won't turn on or off the tv or control the volume of the tv. what do i need to do?
- Google the model number of the remote. You'll find important code info that way. In the case of my remote though, you would turn on the TV, press the setup button on the remote, push and hold the TV button on the remote until the light on the remote flashes twice, then you would enter one of the codes listed for SANYO TV's. After that, push the power button on the remote and if the TV turns off, you entered the right code. If the TV does not turn off, then start over and try a different code. The codes my remote lists for SANYO TV's are as follows: 0154, 0088, 0107, 0146, 0159, 0232, 0484, 0799, 0893, 1142. My remote worked with the first code.
Send your message to us
High quality Control Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
