Full Polished Glazed Porcelain Tile 600x600 CMAXBJ001
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Brief Introduction
Full Polished Glazed Porcelain Tile CMAXBJ001 is a very popular color in the present market. Just like other models, it could be used for interior floor for apartment, villa, super market as well as other public areas, due to its stone like surface, being high glossy and clean, homogeneous color shade as well as the reasonable price compared with natural stones.
Product Features
Full Polished Porcelain Tile, high glossy
Grade AAA available only
Strict quality control system on color shade, deformation, anti-pollution, surface glossy degree as well as packing
Much more competitive price
Standard export packing: Pater Carton+ Wooden Pallet
Fast production arrangement
OEM service could be offered based on the actual requirement
Comprehensive marketing support on samples, catalogues as well as carton designing
Professional sales team available for the whole order operation process
Product Specification
Tile Type: Full Polished Glazed Porcelain Tile
Quality standard: GB/T4100-2006, ISO13006, ISO9001
Water Absorption Rate: 《0.5%
Breaking Strength: 》 1800 N
Rupture Modulus: 》40 MPa
Length and Width Tolerance: ±0.1%
Surface Smoothness: ±0.15%
Edge Straightness: ±0.15%
Wearing Strength: 《1600 mm3
Glossiness: 》 90 Degree
Resistance to Chemical: Class UA
Resistance to Staining: Class 3.
Packing Information (For 27.5 Tons heavy 20’Fcl)
For 600x600mm, 4pcs/Ctn, , 35KgS/Ctn, 36 Ctns/Pallet, 780 Ctns/20’Fcl, 1123.2 m2/20’Fcl
For 800x800mm, 3pcs/Ctn, 56Kgs/Ctn, 28 Ctns/Pallet, 500 Ctns/20’Fcl, 960 m2/20’Fcl
Production Line & Package
FAQ
1. For Full Polished Glazed Porcelain Tile, what is the difference from polished porcelain tile?
—— For full polished porcelain tile, there is a special glaze layer on the tile surface, while for polished porcelain tile, there is no glaze layer.
2. What is the MOQ for this tile?
—— Normally the MOQ is one 20’ container. For those models whose production could be arranged frequently, we could mix 2 or 3 models in one container.
3. Can we use the carton with our own design and brand name?
—— Yes. Normally we go with Neutral Carton. If the order quantity is over 5 containers, we could print the carton of client’s design for the final packing.
- Q: i would like to paint over the old yellow tile on our bathroom walls, and of course in the shower. is that possible, and how can i do that?
- With all due respect to you and any others; CAN I is often part of a question asked here. The simple answer is YES! Will you be satisfied? Rarely. Tile is essentially glass; not at all designed to be painted; or have paint strictly adhere to it. You'll get answers that state a specific primer; or some suggestion to ROUGH UP the tile surface. I've been on the planet a long time; and have installed multiple thousands of sq. ft. of tile; and applied thousands of gallons of paint; but NEVER together. I'll just say; IF I was asked to do so; I'd refuse a job no matter how much the customer was willing to pay. It isn't something I'd want my name on when the paint starts peeling; or a fingernail happens to scratch it; or attempts to remove soap scum; create a large area of SKIN to come off with the scrubbing action. Steven Wolf
- Q: I just bought a new houses that we will build. The decorator went through the selection of tile and want to charge us $9000 for 1500 sf surface and $6800 for a group 3 granite counter top with island. It feels a little pricy. Anybody have experience with new builder and want to expect for flooring and granite counter top?
- No - it's not pricey. The tile price works out to $6/sq ft, which is very average. All prices have been rising, too - every week it seems! For my clients, $6/ sq ft is average. You will find cheaper tile, and you will find more expensive - but that figure gives you a good starting point and lots of options. Without knowing the size of your countertops, I cannot comment on the price. However, the average home I work on is at least $6000 for a granite countertop - depends on what color, edge style, and size, of course.
- Q: I need to remove several tiles for repair and replace the tiles with as little damage as possible
- Hit the individual tiles that you need to get out with a small hammer(not too hard or you might loosen more than you wanted) Once the tile is cracked you should be able to remove the bits, clean up the old adhesive put the new one in. Wear eye protection ....tile glaze is very sharp!
- Q: but now we have decided to probably go with laminate tile in each. Mainly time is the big thing, I know I can put that in but not sure about tile. Anyways is this a good decision. Does anyone have experience with laminate tile and if so can you recommend where or what brand to look at. Also can you give me an idea of pricing..Thanks...
- Are you talking about vinyl squares or Laminate flooring that snaps together? It makes a big difference. If it is vinyl squares Home Depot does have a huge selection, but it will look cheap and that stuff does not stick very well for long term in a very wet area. If it is laminate flooring it will look nicer and will hold up to the moisture better. You will need to caulk the perimeter with silicone. (water on top is o.k. water under the floor and its all over very quickly.) Hope this helps
- Q: standard shiny, white 4x4 tiles. I want to redo the bathroom stalls, but heard from some people that it could take forever, and that i might end up messing up the the drywall? to me it sounds simple... just get a spatula or something of the sort and scrape off the tiles... is that how it goes or is it more difficult than that? has anyone out there done this? what tools would i need? what type of tile cutter do you suggest? i‘d like to replace the tiles with something bigger... maybe 10x10 tiles?
- Being that your house is pretty new most likely the tiles are on drywall and set using latex glue. However if they were set using thinset cement on drywall it will be a little harder or if the builder used the older method and set the tiles in cement on wire mesh, then it's a beast and everything must come down. Using a stiff putty knife start at the top and tap the putty knife behind the tiles and gently pry away from the wall. You will have some damage to the drywall, apply drywall compound, let dry sand down and paint with primer. NOTE: Be sure to wear eye protection and gloves, broken tile is very sharp. Also protect your tub by installing a piece of plywood on top of it to prevent falling tiles from damaging it. It's also not a bad ideal to just tear out the drywall and tile and install new backer board. Maybe a little more work money but In the long run it will make for a much better job. If you are going to use that large of tile you really should tear it out and use the cement backer board and thinset as your glue as these tiles are heavy. Rent a wet saw to cut the tiles.
- Q: i have just bought a house and my ceiling tiles needs cleaning. i would like to know if anyone out there knows what i can use to clean them. the ceiling tiles has dust but also has mildew on some of them. i don‘t want to replace them, i just want to clean them for now. thank you everyone.
- The one thing I can suggest to you is go to a place that deals with ceiling tiles and they will let you know what to use to clean them. I understand this a just for now project, but do consider what is the reason for the mildew even if you replace the tiles at a later date. If someone suggests to paint them then you're really going to have to ask the experts. If you use the wrong paint you can loose the acoustics. There are certain kinds of paints to use for ceiling tiles. I hesitate to tell you to use soap and water, because I don't know what the out come will be. It's like if you use too much of anything what will the results be. Same with soap and water regarding ceiling tiles. I may be making a mountain out of a mole hill, but I think you need to go to any hardware dept. that deals with ceiling tiles and get some straight answers before moving on, even if this is a temporary fix.
- Q: 12x12 tiles, what size trowel do i use and how far apart do i space tiles?
- For a standard tile (such as most 12x12) the use of a 1/4x3/8 ths square notched trowel. 99.9% of all 12x12 will require a sanded grout,NEVER an unsanded grout. This has to do with both tile thick ness , water absorption, tile body hardness and grout line size. You shouldn t use a grout line less than 3/16 any way for this size tiles. And any grout line over 1/8 , a sanded grout must be used any way. Any questions you can e mail me through my avatar and check my qualifications there. GL
- Q: What is Spanish Tile, why is it called Spanish Tile, and is this considered a good flooring option?And how does it feel in summer and winter (concrete slab floor below)?
- Spanish tiles such as satillo etcetra is like an adobe, made of clay, very durable and strong, nice looking...It is also prefered for diy'selfers that want to save money and install thier own...Spanish tile usually have slighty irregular edges, not perfectly straight, and on purpose..they do not have to be perfectly straight when laid due to these irregular edges..but keep as straight as possible, but becuase of the irregularities, the eyeball cannot see the ones not perfectly straight..They are a very pourous tile, so use a good sealer after instilation...You can buy these tiles straight edged too, but these would be for the professional to install if you have no knowledge of them..
- Q: We have small ceramic tiles on our bathroom floor. They are varied in shape and size (see photo).I think that these tiles originally came with some sort of netting on the back when they laid the floor and they added grout? I believe I saw some extra tiling somewhere in our home and this is what I had found.Anyway, the grout is breaking up between some of the tiles and some of the tiles keep popping out. I have two questions, If I regrout them do I put it on the bottom of the tile too and does that make the tile adhere to the floor?How would I get the grout to match what‘s already there, it‘s a medium brown gray. Not sure if it started out that way or became like that over the years. Would it look funny if the grout didn‘t match? How could I get it to match?
- no, reglue tiles, regrout after cleaning out old stuff. 2 step process
- Q: I have a few chips in my ceramic floor tile. It‘s a light natural color tile, so the chipped part is dark and noticeable. Is there anything that you can put in the chips to cover them up?
- Check okorder /
Send your message to us
Full Polished Glazed Porcelain Tile 600x600 CMAXBJ001
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1209.6
- Supply Capability:
- 100000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
